DELL BE200D2 Wireless WLAN Card Instructions
- September 5, 2024
- Dell
Table of Contents
BE200D2 Wireless WLAN Card
“`html
Product Specifications:
- Manufacturer: Dell Inc.
- Model: Dell Wireless WLAN Card
- Compliance: FCC Part 15
- Frequency Bands: 5GHz
- Operating Conditions: Indoor Usage Only
Product Usage Instructions:
Regulatory Compliance:
This Dell Wireless WLAN Card must be used in accordance with FCC
regulations and the manufacturer’s instructions provided in the
user documentation.
Installation:
-
Ensure the card is installed as per the manufacturer’s
guidelines. -
Avoid co-locating or operating the device with other antennas
or transmitters. -
For 5GHz operations, restrict usage to the 5.15-5.25GHz and
5.47-5.725GHz bands for indoor use only.
Interference Mitigation:
If interference with radio or television reception occurs, take
the following steps:
-
Check the installation and positioning of the device.
-
Try different locations or adjust the positioning to minimize
interference. -
If issues persist, seek advice from Dell Inc. representatives
or radio/television technicians.
Frequently Asked Questions (FAQ):
Q: Can I use this WLAN card outdoors?
A: No, this WLAN card is designed for indoor usage only,
specifically in the 5GHz frequency bands mentioned in the
manual.
Q: What should I do if I experience interference with radio or
television signals?
A: First, try repositioning the device to minimize interference.
If the issue persists, consult Dell Inc. representatives or a
qualified technician for further assistance.
“`
FCC Radiation Exposure Statement
WARNING: The radiated output power of the Dell Wireless WLAN Card devices is
below the FCC radio frequency exposure limits. Nevertheless, the Dell Wireless
WLAN Card devices should be used in such a manner that the potential for human
contact during normal operation is minimized. To avoid the possibility of
exceeding the FCC radio frequency exposure limits, you should keep a distance
of at least 20 cm between you (or any other person in the vicinity) and the
antenna that is built into the end-product. To determine the location of the
antenna within your end-product, check the information posted on the general
Dell support site at http://support.dell.com.
This device has also been evaluated for and shown compliant with the FCC RF
exposure limits under portable exposure conditions (antennas are within 20 cm
of a person’s body) when installed in certain specific OEM configurations.
Details of the authorized configurations can be found at FCC Equipment
Authorization Search website
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm by entering the FCC
ID number on the device.
Interference Statement
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the manufacturer’s instruction
manual, may cause interference with radio and television reception. This
equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference. 2) This device must accept
any interference received, including interference that may cause undesired
operation.
Notice: The FCC regulations provide that changes or modifications not expressly approved by Dell Inc. could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
e the system with respect to the receiver. branch circuits.
on different
If necessary, consult a representative of Dell Inc. or an experienced
radio/television technician for additional suggestions.
NOTE: This Dell Wireless WLAN Card must be installed and used in strict
accordance with the manufacturer’s instructions as described in the user
documentation that comes with the product. Any other installation or use will
violate FCC Part 15 regulations. Modifications not expressly approved by Dell
could void your authority to operate the equipment.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Notice for 5GHz only: Notice for 5GHz only: Operations in the 5.15-5.25GHz and
5.47-5.725GHz bands are restricted for indoor usage only. Operations in the
5.15-5.25GHz and 5.47-5.725GHz bands are restricted for indoor usage only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>