HUMMINBIRD 532541-1 A Wireless Remote User Guide
- June 9, 2024
- Humminbird
Table of Contents
532541-1 A Wireless Remote
User Guide
Install the Battery and Lanyard
- Remove the Battery Cover: Use a Phillips screwdriver to loosen the screw.
- Install the Battery: Insert the battery with the positive side (+) facing up. Replace the battery cover and screw.
- Attach the lanyard to the remote.
Sync the Remote with the Control Head
Use the following instructions to sync the wireless remote with one (1) Humminbird® control head.
- Power on the control head.
- Open the Wireless Remote Menu: Depending on your control head model, the Wireless Remote menu is located under the Accessories tab (Main Menu > Accessories tab) or the Wireless Remote tool (Home screen > Wireless Remote tool).
- Under the Wireless Remote menu, select Sync New Remote.
- Follow the on-screen instructions to sync the remote.
- Visit our Web site at humminbird.com to download the Wireless Remote Operations Guide for operations information.
Contacting Humminbird
Contact Humminbird Customer Service by visiting our Web site at humminbird.com
or by calling 1-800-633-1468.
NOTE:
For warranty and service policy information, visit our Web site at
humminbird.com.
FCC NOTICE: Johnson Outdoors Marine Electronics, Inc.
Model: RC 2
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AAHS-ASRC IC: 4397C-ASRC
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>