Matrix Decor RM50 True HEPA Air Purifier Installation Guide
- June 9, 2024
- matrix decor
Table of Contents
Matrix Decor RM50 True HEPA Air Purifier Installation Guide
Package Contents
1 x Air Purifier
1 x True HEPA 3-Slage Filter(Pre-installed)
1 x Power Cable
1 x USB Charger
1 x User Manual
Specifications
1. Security Precautions
Dear Users:
Hello! Thank you for using the air purifier. In order for you to read this
manual and use the air purifier better, the following is our explanation of
the symbols in the manual:
2. Components Instruction
3. Preparation Before Using
Install the Filter (Please finish the steps before inserting the power plug into the socket!)
4. Operation and Function
One-Touch Button Operation and Display Instructions:
When it is powered on for the first time, the indicator is off after the
buzzer beeps and all the display keys turn on in turn. One-Touch Button to
power on/off and change speed.
Power Switch:
Press the One-Touch button, the air purifier enter the start-up state. The
wind speed is operated in low gear by default, and the corresponding indicator
stay on. Press and hold the One-Touch button for 3 seconds will enter the
standby mode.
3-Stage Wind Speed:
The default wind speed is low in the start-up state. Press the One-Touch
button to select the wind speed at low/Medium/High mode and the corresponding
indicator light will light up.
5. Product Troubleshooting
6. Precautions for Power Cables
- Do not use power sources other than the rated voltage (DC 5V / 1A ). (Otherwise it may cause fire, electric shock, etc.)
- Do not process, forcibly bend, pull, twist, or bundle the power cable, or put it near high temperature objects. (Damaged power cable may cause fire, electric shock, etc.)
- Do not load heavy objects or clamp them. (Heavy load may cause fire, electric shock, etc.)
- Do not use the power cable or power plug when it is damaged or inserted into the power socket loosely. (Otherwise it may cause fire, electric shock, short circuit, etc.)
- Do not insert or remove the power cord with wet hands. (Otherwise it may cause electric shock, etc.)
- When moving ii, avoid damage to the power cable caused by your feet. (Otherwise it may cause electric shock, heat, fire, etc.)
- Do not replace the power cord without authorization. However, if it is damaged and needs to be replaced, please contact the our maintenance service center for repair.
- The dust on the power plug or socket should be cleaned regularly. (Excessive dust and moisture will cause poor insulation, which may cause fire and electric shock, etc.)
⚠ Warning
Non-professionals are not allowed to disassemble the machine without
authorization to prevent the danger of electric shock. Please unplug the power
supply first when replacing or cleaning the filter. If there is a fault,
please refer to the troubleshooting solution in the user manual. If it still
can not be eliminated, please contact our agent or our company.
7. Maintenance
8. Replace the Filter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>