JBLQUANTUM800BLKAM Quantum 810 Wireless Gaming Headset User Guide

: June 4, 2024
: JBL

Table of Contents

Software requirements
WHAT’S IN THE BOX
Requirements
OVERVIEW
POWER ON & CONNECT
SETUP
BUTTON COMMAND
First time setup
TECH SPEC
IC RF Exposure Information and Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JBLQUANTUM800BLKAM Quantum 810 Wireless Gaming Headset User Guide

JBL QuantumENGINE

Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine

Software requirements

Platform: Windows 10 (64 bit only) / Windows 11
500MB of free hard drive space for installation
*Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE

*JBL QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation required

WHAT’S IN THE BOX

Package Content

Requirements

JBL QuantumENGINE SOFTWARE REQUIREMENTS

Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION

CONNECTIVITY| PC| PS4/PS5| XBOX™| NINTENDO SWITCH™| MOBILE| MAC| VR
---|---|---|---|---|---|---|---
3.5 mm Audio Cable| Stereo| Stereo| Stereo| Stereo| Stereo| Stereo| Stereo
2.4G Wireless| JBL QuantumSURROUND
& DTS HEADPHONE: X.V2| Stereo| Not Compatible| Stereo| Not Compatible| Stereo| Stereo
Bluetooth| Stereo| Not Compatible| Not Compatible| Stereo| Stereo| Stereo| Not Compatible

OVERVIEW

ANC / TALKTHRU LED
ANC / TALKTHRU button
Game audio-chat balance dial
Volume Control
Detachable Windshield foam
Notification LED for mic mute / unmute
Microphone Mute / unMute
CHARGING LED
3.5mm Audio Jack
USB-C port
Voice Focus Boom Microphone
Bluetooth pairing button
POWER ON / OFF slider
POWER / 2.4G / Bluetooth LED
RGB Lighting Zones
Flat-fold ear cup
2.4G PAIRING BUTTON
Volume Control
MIC MUTE BUTTON

POWER ON & CONNECT

Power Connections

Bluetooth

SETUP

Product Setup

BUTTON COMMAND

ANC on/off X1 TALKTHRU ON/OFF >2S
INCREASE GAME VOLUME
INCREASE CHAT VOLUME
+ INCREASE MASTER VOLUME +
– DECREASE MASTER VOLUME –
Microphone Mute / unMute x1
↑ON / ↓OFF >5S
2S BT PAIRING MODE

First time setup

Software setup

Connect the headset to your PC via 2.4G USB wireless connection.
Go to “Sound Settings” -> “Sound Control Panel”.
Under “Playback” highlight “JBL QUANTUM810 WIRELESS GAME” and select “Set Default” -> “Default Device”.
Highlight “JBL QUANTUM810 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
Under “Recording” highlight “JBL QUANTUM810 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
In your chat application select “JBL QUANTUM810 WIRELESS CHAT” as the default audio device.
Follow the onscreen instructions to personalize your sound settings.

MICROPHONE

MICROPHONE INSTRUCTION

CHARGING

LED BEHAVIOURS

TECH SPEC

Driver size: 50 mm Dynamic drivers
Frequency response (Passive): 20 Hz – 40 kHz
Frequency response (Active): 20 Hz – 20 kHz
Microphone frequency response: 100 Hz -10 kHz
Max input power: 30 mW
Sensitivity: 95 dB SPL @1 kHz / 1 mW
Maximum SPL: 93 dB
Microphone sensitivity: -38 dBV / Pa@1 kHz
Impedance: 32 ohm
2.4G Wireless transmitter power: <13 dBm
2.4G Wireless modulation: GFSK, π/4 DQPSK
2.4G Wireless carrier frequency: 2400 MHz – 2483.5 MHz
Bluetooth transmitted power: <12 dBm
Bluetooth transmitted modulation: GFSK, π/4 DQPSK
Bluetooth frequency: 2400 MHz – 2483.5 MHz
Bluetooth profile version: A2DP 1.3, HFP 1.8
Bluetooth version: V5.2
Battery type: Li-ion battery (3.7 V / 1300 mAh)
Power supply: 5V 2 A
Charging time: 3.5 hrs
Music play time with RGB lighting off: 43 hrs
Microphone pickup pattern: Unidirectional
Weight: 418 g

IC RF Exposure Information and Statement

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ810WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.002 W/Kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ810WLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.106W/Kg. Head operation The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ810WL

Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Noncompliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.
IC: 6132A-JBLQ810WLTM

WARNING

DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY
DO NOT SHORT CIRCUIT
MAY EXPLODE IF DISPOSED OF IN FIRE
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Bluetooth Icon
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.