Matrix Decor BTC2806W Single Handle Pull Down Sprayer Kitchen Faucet Instruction Manual
- June 12, 2024
- matrix decor
Table of Contents
PULL DOWN KITCHEN FAUCET
INSTALLATION INSTRUCTIONS
Notes before installation:
- Please check that all components are present.
- Before installation ensure that all feed lines are clear of debris and on/off valve is present.
- Ensure water pressure is between 20-125 PSI(includes combination of hot and cold feed lines).
- Picetures in the manual are general in content and may not represent exactly your purchased faucet. if you are having difficulties please contact a professional plumber.
- if you will be away from home for an extended period you should shut off the main water supply.
Daily maintenance:
- Use a soft cloth and vinegar to remove hard-water spots.
- Check aerator(if present) regularly for calcium build up are when water stream is not optimum.
- DO NOT use caustic cleaning products as the use will break down finish and will void the product warranty.
- Acceptable cleaners include vinegar or mild non-abrasive liquid detergents.
- if the water pressure appears to be less than optimum remove, inspect, clean or replace aerator.
Tolls we will need:
| Adjustable Wrench
---|---
| Philips Screwdriver
|
---|---
1. Remove the rubber washer, metal washer and locking
nut from the faucet.| 2. Install faucet through center hole.
|
3.Re-install the rubber washer followed by the metal washer and lock-nut. Hand
tighten then tighten further using a screw driver to tighten lock-nut screws.|
4. Attach the pull-down hose to the outlet tube and screw on the adapter and
tighten firmly in place.
|
5. Attcah flexible hose to water supply.| 6. Remove the spray head and turn
on faucet for 1-minute to flush debris. Close the handle and re-assemble spray
head.
Note: Pictures in the manual are general in content and may not represent exactly your purchased faucet. If you are having difficulties please contact a professional plumber.