Whirlpool W11417284 Built-In Electric Oven User Guide
- June 9, 2024
- Whirlpool
Table of Contents
Built-In Electric Oven Control Guide
FEATURE GUIDE
W11417284 Built-In Electric Oven
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s
Owner’s Manual, before operating this appliance.
This manual covers several models. Your model may have some or all of the
items listed. Refer to this manual or the Product Help section of our website
at www.whirlpool.com for more detailed
instructions. In Canada, refer our website
www.whirlpool.ca. For more specific details on
a feature and steps to use the features listed, refer to the titled section
for that feature.
WARNING
Food Poisoning Hazard
Do not let food sit for more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
KEYPAD | FEATURE | INSTRUCTIONS |
---|---|---|
LIGHT | Clock | This clock can use a 12- or 24-hour cycle. See “Electronic Oven |
Controls” section.
1. Press CLOCK until “Clock” is displayed.
2. Press the number keypads to set the time of day.
3. Press START/ ▷.
CLOCK| Oven cavity light| While the oven door(s) are closed, press LIGHT to
turn the light(s) on and off. The oven light(s) will come on when an oven door
is opened.
TIMER ON/OFF| Oven timer| The Timer can be set in hours or minutes up to 9
hours and 59 minutes.
1. Press TIMER ON/OFF.
2. Press the number keypads to set the length of time in hr-min. Leading
zeros do not have to be entered. For example, for 2 minutes, enter “2.”
3. Press TIMER ON/OFF to begin the countdown. If enabled, timer tone(s) will
sound at the end of countdown.
4. Press TIMER ON/OFF to cancel the Timer and return to the time of day. Do
not press OFF/CANCEL/✖ because the oven will turn off.
START | Cooking start| The Start keypad begins any oven function. If Start is
not pressed within 2 minutes after pressing a keypad, the function is canceled
and the time of day is displayed.
OFF/CANCEL | Oven function| The Off/Cancel keypad stops any oven function
except the Clock, Timer, and Control Lock.
BAKE| Baking and roasting| 1. Press BAKE.
2. Press the number keypads to set the desired temperature. If the
temperature entered is not in the range of the temperatures allowed, the
minimum or maximum allowed temperature will be displayed. Enter a temperature
in the allowable range.
3. (Single rack baking only) Press START/ ▷ . Rapid Preheat will begin.
IMPORTANT: Rapid Preheat should be used only for single-rack baking.
4. (Multiple rack baking) Press START/ ▷. Press START/ ▷ again to cancel
Rapid Preheat.
5. To change the temperature, repeat steps 2 and 3.
6. Press OFF/CANCEL/✖ when finished.
BROIL| Broiling| 1. Press BROIL.
2. Press the number keypads to set the desired temperature. If the
temperature entered is not in the range of the temperatures allowed, the
minimum or maximum allowed temperature will be displayed. Enter a temperature
in the allowable range.
3. Press START/ ▷, and then allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven, and close the door.
5. To change the temperature, repeat steps 2 and 3.
6. Press OFF/CANCEL/✖ when finished.
FAVORITE| Saved favorite| The Favorite feature allows you to save the time and
temperature settings from any active cook function. To save or use favorite,
see the “Favorite” section.
KEEP WARM| Hold warm| Food must be at serving temperature before placing it in
the warmed oven.
1. Press KEEP WARM.
2. Press the number keypads to set the desired temperature. If the
temperature entered is not in the range of the temperatures allowed, the
minimum or maximum allowed temperature will be displayed. Enter a temperature
in the allowable range.
3. Press START/ ▷.
4. To change the temperature, repeat steps 2 and 3.
5. Press OFF/CANCEL/✖ when finished.
DELAY START| Delayed start| The Delay Start keypad is used to enter the
starting time for an oven function with a delayed start. Delay Start should
not be used for foods such as breads and cakes because they may not bake
properly.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
COOK TIME| Timed cooking| Cook Time allows the oven to be set to turn on at a
certain time of day, cook for a set length of time, and/or shut off
automatically.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
COOK & HOLD| Timed cooking and keep warm| Cook & Hold allows the oven to be
set to cook for a set length of time, followed by a 1-hour Keep Warm cycle.
To set a Cook & Hold or a Delayed Cook & Hold, see the “Cook & Hold” section.
SELF CLEAN| Self-cleaning cycle| See the “Self-Cleaning Cycle” section in the
Owner’s Manual.
CONTROL LOCK hold 3 sec.| Oven control lockout| 1. Check that the oven and
timer are OFF.
2. Press and hold CONTROL LOCK for 3 seconds.
3. If enabled, a tone will sound and the controls will be locked.
4. Repeat to unlock. No keypads will function with the controls locked.
SETTINGS| Oven use functions| Settings enables you to personalize the audible
tones and oven operation to suit your needs.
OVEN USE
Odors and smoke are normal when the oven is used the first few times or when
it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to the fumes
given off. Exposure to the fumes may result in death to certain birds. Always
move birds to another closed and well ventilated room.
Electronic Oven Controls
Control Display
The display will light up when first powered up or after a power loss. When
oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
- Valid keypad press.
- Oven is preheated (long tone).
- Kitchen timer (long tone with reminder tone every 60 seconds).
- Function has been entered.
Three Tones
- Invalid keypad press.
Four Tones
- End of cycle (with reminder tone every 60 seconds).
Use the Clock/Tools, Settings/Clock or Settings keypad to change the tone
settings.
Settings
Many features of the oven control can be adjusted to meet your personal needs.
These changes are made using the Settings keypad.
Use the Settings keypad to scroll through the features that can be changed.
Each press of the Settings keypad will advance the display to the next
setting. After selecting the feature to be changed, the control will prompt
you for the required input. Details of all of the feature changes are
explained in the following sections.
Press OFF/CANCEL/✖ to exit Settings.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but can be changed to Celsius.
- Press SETTINGS until “TEMP UNIT” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
Audible Tones Disable
Turns off most tones, including the end of cycle tone and key press tones.
Reminder tones remain enabled when audible tones are disabled.
- Press SETTINGS until “SOUND” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
- Press SETTINGS until “SOUND VOLUME” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
- Press SETTINGS until “END TONE” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
- Press SETTINGS until “KEYPRESS TONE”” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after the end of
cycle tones.
- Press SETTINGS until “REMINDER TONE” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
12/24 Hour Clock
- Press SETTINGS until “12/24 HOUR” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours after the
oven initiates a cook or clean function. This will not interfere with any
timed or delay cook functions.
- Press SETTINGS until “12 HR AUTO OFF” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
Languages – Scrolling Display Text
Language options are English and French.
- Press SETTINGS until “LANGUAGE” is displayed.
- The current setting will be displayed.
- Press the number keypad as instructed by the scrolling text to select the new language.
- Press OFF/CANCEL/✖ to exit and display the time of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven temperature. Elements
will cycle on and off as needed to provide consistent temperature, but they
may run slightly hot or cool at any point in time due to this cycling. Most
thermometers are slow to react to temperature change and will not provide an
accurate reading due to this cycling.
The oven provides accurate temperatures; however, it may cook faster or slower
than your previous oven, so the temperature can be adjusted to personalize it
for your cooking needs. It can be changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
- Press SETTINGS until “TEMP CALIB” is displayed.
- The current setting will be displayed.
- Press START/▷ to select the choice displayed in Step 2. Wait several seconds for the display to change or press START/▷, and then continue with Step 4.
- Press the “3” keypad to increase the temperature in 5°F (3°C) increments, or press the “6” keypad to decrease the temperature in 5°F (3°C) increments. The range is from -30°F to +30°F (-18°C to +18°C).
- Press START/▷.
- Press OFF/CANCEL/✖ to exit and display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor with 120 V
power connection and permits the control features to be demonstrated without
heating elements turning on. If this feature is activated, the oven will not
work.
- Press SETTINGS until “DEMO MODE” is displayed.
- The current setting will be displayed.
- Press the “1” keypad to adjust the setting.
- Press OFF/CANCEL/✖ to exit and display the time of day.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting until turned
off.
When the Sabbath Mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will sound, and
the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not turn On or
Off, and the heating elements will not turn On or Off immediately.
NOTE: If a power failure happens while Sabbath mode is running, the oven
will show Sabbath mode is ON, but the Bake cycle will not be ON. If the oven
door is opened during this time, the oven light will turn on.
To Enable Sabbath Mode Capability (One Time Only):
- Press SETTINGS until “SABBATH” is displayed.
- Press the “1” keypad. Sabbath Mode can be activated for baking.
- Press OFF/CANCEL/✖ to save the setting and exit to display the time of day.
NOTE: To disable the Sabbath Mode, repeat steps 1 through 3 to change the
status from “SABBATH ON” to “SABBATH OFF.”
To Activate Sabbath Mode:
-
Press BAKE.
-
Press the number keypads to set the desired temperature. If the temperature entered is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
-
Press START/▷.
For timed cooking in Sabbath Mode, press COOK TIME, and then press the number keypads to set the desired cook time. Press START/▷. -
Press SETTINGS. Three tones will sound. Then press “7.”
“SAb” will appear in the display.
To Adjust Temperature:
- Press the number keypad as instructed by the scrolling text to select the new temperature.
Keypad| Temperature Setting
---|---
°F| °C
1| 170| 77
2| 200| 93
3| 225| 107
4| 250| 121
5| 300| 149
6| 325| 163
7| 350| 177
8| 375| 191
9| 400| 204
0| 450| 232
NOTE: The temperature adjustment will not appear on the display, and no tones will sound. The scrolling text will be shown on the display as it was before the keypad was pressed.
- Press START/▷.
To Deactivate Sabbath Mode:
Press SETTINGS, and then press “7” to return to regular baking, or press
OFF/CANCEL/✖ to turn off the oven(s).
Positioning Racks and Bakeware
Use the following illustration and charts as a guide for positioning racks.
Rack Positions
Broiling
Food | Rack Position |
---|---|
Broiled meats, poultry, fish | 6 |
Broiling/searing meats, hamburgers, steaks | 6 |
Baking
Food | Rack Position |
---|---|
Large roasts, roasted meats or poultry | 1 or 2 |
Most baked goods, casseroles | 2 or 3 |
Bakeware
To cook food evenly, hot air must be able to circulate. For best results,
allow 2″ (5 cm) of space around bakeware and oven walls.
Use the following chart as a guide.
Number of Pan(s) | Position on Rack |
---|---|
1 | Center of rack. |
2 | Side by side |
3 or 4 | See the rack position graphic in this section for pan placement |
recommendations.
NOTE: Bakeware materials and color may affect results. Dark, dull, non- stick or glass pans may require shorter baking times, in contrast insulated or stainless steel pans may require longer baking times. Follow bakeware manufacturer’s recommendations.
Baking and Roasting
Preheating
When beginning a Bake cycle, the oven will begin preheating after START/▷ is
pressed. The oven will take approximately 13 to 19 minutes to reach 350°F
(177°C) with all of the oven racks provided with your oven inside the oven
cavity. Higher temperatures will take longer to preheat. The preheat cycle
rapidly increases the oven temperature. The actual oven temperature will go
above your set temperature to offset the heat lost when your oven door is
opened to insert food. This ensures that when you place your food in the oven,
the oven will begin at the proper temperature. Insert your food when the
preheat tone sounds. Do not open the door during preheat before the tone
sounds.
Rapid Preheat
Rapid Preheat can be used to shorten the preheating time. Only one standard
flat oven rack should be in the oven during Rapid Preheat. Extra racks should
be removed prior to starting Rapid Preheat. The preheating cycle should be
completed before placing food in the oven. When the Rapid Preheat cycle is
complete, the oven starts a normal Bake cycle.
IMPORTANT: Rapid Preheat should be used only for single-rack baking.
Oven Temperature
While in use, the oven elements will cycle on and off as needed to maintain a
consistent temperature, but they may run slightly hot or cool at any point in
time due to this cycling. Opening the oven door while in use will release the
hot air and cool the oven which could impact the cooking time and performance.
It is recommended to use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in the non-
convection bake mode to improve oven performance.
Broiling
When broiling, preheat the oven for 5 minutes before putting food in, unless
recommended otherwise in the recipe. Position food on grid in a broiler pan,
and then place it in the center of the oven rack. Close the oven door to
ensure proper broiling temperature.
NOTE: Odors and smoke are normal the first few times the oven is used or
if the oven is heavily soiled.
Changing the temperature when broiling allows more precise control when
cooking. The lower the broil setting is, the slower the cooking. Thicker cuts
and unevenly shaped pieces of meat, fish, and poultry may cook better at lower
broil settings. Place the food in the upper or lower oven. Refer to the
“Positioning Racks and Bakeware” section for more information.
On lower settings, the broil element will cycle on and off to maintain the
proper temperature.
- For best results, use a broiler pan and grid. It is designed to drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be ordered. Please refer to the Quick Start Guide for contact information.
Keep Warm
IMPORTANT: Food must be at serving temperature before placing it in the
warmed oven. Food may be held up to 1 hour; however, breads and casseroles may
become too dry if left in the oven during the Keep Warm function. For best
results, cover food. The Keep Warm feature allows hot cooked foods to stay at
serving temperature.
To Use:
-
Press KEEP WARM.
-
Press the number keypads to set the desired temperature. If the temperature entered is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
NOTE: The temperature may be changed at any time by pressing the number keypads to enter the desired temperature and then START/▷. -
Press START/▷.
-
Place food in the oven.
-
Press OFF/CANCEL/✖ when finished.
-
Remove food from the oven.
To Cancel Keep Warm:
- Press OFF/CANCEL/✖.
- Remove food from oven.
Favorite
The Favorite feature allows you to save the time and temperature settings from
any active cook function.
To Save a Cooking Function as a Favorite:
- Press FAVORITE.
- Press “2” to save the last performed cooking function. A confirmation message will appear.
To Recall and Start a Favorite:
-
Press FAVORITE.
-
Press “1.” The last saved function will appear onscreen. If no functions have ever been saved, “no favorite saved” will appear
-
The set temperature can be changed by using the number keypad to enter the desired value, then pressing START/▷.
The Cook Time (if available) can be changed by pressing COOK TIME, and then using the number keypad to enter desired time, then pressing START/▷. The temperature and time can be changed after the function has started. -
Place food in the oven when required.
-
Press OFF/CANCEL/✖ when finished.
-
Remove food from the oven.
Cook & Hold
Cook & Hold allows the oven to be set to cook for a set length of time,
followed by a 1-hour Keep Warm cycle.
Delay Cook & Hold allows the oven to be set to start cooking after a length of
time you set, cook for a set length of time, followed by a 1-hour Keep Warm
cycle.
Delay start should not be used for food such as breads and cakes because they
may not bake properly. Do not use delayed baking if oven is already hot.
NOTE: During the Cook & Hold function, the Delay Start and Cook Time are
applied to the baking itself and not for the “Holding Warm” phase.
-
Press BAKE.
-
Use the number keypads to enter the desired temperature.
NOTE: The temperature may be changed at any time by using the number keypads to enter the desired temperature, and then pressing START/▷. Changing the temperature once food is placed in the oven could affect the performance. -
Press COOK & HOLD.
-
Use the number keypads to enter the desired cook time.
-
(Optional) If a Delay Start is desired, press DELAY START.
Use the number keypad to enter the desired time for delay.
Repeat steps 1 through 3. -
Press START/▷. The oven will preheat, and a beep will sound when the preheat is done.
-
Place the food in the oven, and close the oven door when preheat is complete.
-
At the end of the time set, the oven will keep warm automatically, and the end of cycle tone will sound.
NOTE: To change the set cooking time at any time during the cooking cycle:
a. Press COOK TIME.
b. Enter the desired time using the number keypads.
c. Press START/▷.
d. Press COOK & HOLD.
Once the cook time countdown is complete, “Cooking complete – Holding warm” will scroll in the text area until the door is opened, OFF/CANCEL/✖ is pressed, or 1 hour has passed. -
Press OFF/CANCEL/✖ to complete the cycle.
-
Remove food from the oven.
NOTE: To cancel the hold function without canceling the cooking cycle, press COOK & HOLD after the Cook & Hold function is enabled. The display will not show any change. Once the cook time countdown is complete, “Cooking complete” will scroll in the text area.
Cook Time
To Set a Timed Cook:
-
Press the keypad for any cooking function except Broil or Hold Warm or Keep Warm.
-
Press the number keypads to set the desired temperature. If the temperature entered is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
-
Press COOK TIME.
-
Press the number keypads to enter the length of time to cook.
-
Press START/▷ for the selected oven. The display will count down the time. When the time ends, the oven will shut off automatically.
The temperature and/or time setting can be changed at any time by repeating steps 2 through 5 and press START/▷.
To change the time setting, repeat steps 3 through 5. -
Press OFF/CANCEL/✖ to clear the display.
To Set a Delayed Timed Cook:
-
Press DELAY START.
-
Press the number keypads to enter the number of hours and/ or minutes you want to delay the start time.
-
Press the keypad for any cooking function except Broil or Hold Warm or Keep.
-
Press the number keypads to set the desired temperature. If the temperature entered is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range.
-
Press START/▷.
-
Press the number keypads to enter the length of time to cook.
-
Press START/▷.
When the start time is reached, the oven will automatically turn on.
To change the temperature after the delay countdown, repeat steps 4 and 5. To change the time after the delay countdown, press COOK TIME and then repeat steps 6 and 7.
When the set cook time ends, the oven will shut off automatically. -
Press OFF/CANCEL/✖ to clear the display.
®/™ ©2020 Whirlpool. All rights reserved.
Used under license in Canada.
W11417284A
Documents / Resources
|
Whirlpool W11417284 Built-In Electric
Oven
[pdf] User Guide
W11417284 Built-In Electric Oven, W11417284, Built-In Electric Oven, Electric
Oven, Oven
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>