anko 43105120 Portable Speaker TWS Earphones User Manual
- June 17, 2024
- Anko
Table of Contents
anko 43105120 Portable Speaker TWS Earphones User Manual
Speaker Operation
CHARGING
- This Speaker is powered by a rechargeable Li-ion battery.
- Please use provided micro USB cable for charging.
- Plug the micro USB connector to the charging port of speaker, and the USB A connector of other end into a power bank, wall charger or other 5V device.
- Speaker indicator flashes blue when charging & and remains on when fully charged
- Charging time 1-2hrs
PAIRING
- Press and hold the Power button until the LED flashes rapidly, indicating it is ready to pair with a Bluetooth device.
- In the Bluetooth menu on the media device, search for “KM43105120-SPEAKER” or “KM43105144-SPEAKER” and connect. Type “0000” or “1234” if password requested.
- Once the speaker is successfully connected, indicator remains on and you can now play music through the speaker. When playing music, the indicator light will flash slowly in blue.
12 month warranty
Thank you for your purchase from Kmart
Kmart Australia Ltd warrants your new product to be free from defects in
materials and
workmanship for the period stated above, from the date of purchase, provided
that the
product is used in accordance with the accompanying recommendations or
instructions
where provided. This warranty is in addition to your rights under the
Australian Consumer Law. Kmart will provide you with your choice of a refund,
repair or exchange (where possible) for this product if it becomes defective
within the warranty period. Kmart will bear the reasonable expense of claiming
the warranty. This warranty will no longer apply where the defect is a
result of alteration, accident, misuse, abuse or neglect. Please retain your
receipt as proof of purchase and contact our Customer Service Centre on 1800
124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via
Customer Help at kmart.com.au for any difficulties with your product, Warranty
claims and claims for expense incurred in returning this product can be
addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic
3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Low. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation
WARNING Do not dispose of unit in fire or water. Never attempt to disassemble and reassemble Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycle advice. Keep your device and all accessories out of reach of children and animals. Small parts may cause choking or serious injury if swallowed. Avoid exposing your device to very cold or very hot temperatures (below 0°C of above 45°C), Extreme temperatures con cause deforming of th device and rec reduce the charging capacity and life of your device. Do not allow your device to get wet, liquids can cause serious damage. Do not handle your device with wet hands.
Specification
- Bluetooth name of Speaker: 43105120/43105144-SPEAKER
- Bluetooth name of Earbuds: 43105120/43105144-EARBUD
- Input power: 5V 500mA
- Working current: 100mA
- Bluetooth version: V5.0.
- Effective distance: 10 meters
- Working frequency: 2.402GHz-2.480GHz
- Signal to noise ratio: > 85dB
- Speaker specifications: 40 2W
- Audio range: 20-20Khz
- Earbuds playing time: 2-3h
- Speaker playing time: 1-2h
Quick start guide
- Speaker charging port
- Speaker Bluetooth indicator
- ON/OFF button
- Speaker charging indicator
- Earbuds touch control area
- Earbuds Bluetooth & charging indicator
- Please remove protection sticker from earbuds before first use.
Earbuds operating
| Function | Operating |
|---|---|
| Power on |
- Automatically turn on when taken out of charging box )
- Press & hold touch area for 3 seconds
Power off|
- Automatically turn off when put into charging box
- Press & hold touch area of either L/R for 5 seconds
- Automatically turn off if not connected for 5 minutes
L/R pairing|
- Left and right earbuds will automatically pair up when turned on: if not, double click either side of the earbuds.
- When paired up, left earbud flashes red alternatively, and right earbud flashes blue every 5s
Bluetooth connection| Find KM43105120-EARBUD or KM43105144-EARBUD on the
Bluetooth list of your device and connect; put in “0000” or “1234” if password
is requested
Skip to previous track| Double-click left earbud
Skip to next track| Double-click right earbud
Decrease volume| Triple-click left earbud
Increase volume| Triple-click right earbud
Play/Pause| Press either left or right earbud
Activate voice assistant| Press and hold either left or right earbud till you
hear a ‘Di sound
Answer call| Press either left or right earbud when call incoming
Hang up call| Press either left or right earbud during a call
Reject call| Press and hold either left or right earbud for 2s when call
incoming
Charging|
- Put earbuds back Into charging case. LED indicatorstays red and turns off when fully charged.
- It takes lh to charge. A fully charged case(speaker) can re-charge the earbuds 3 times.
When you hear earbuds beeping regularly that means the battery is low and you need to place them in the charging case to recharge.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>