Shenzhen X Nego Industrial RCM50-G1-BLACK Rush Charge 5000mAH Mc Wireless Power Bank User Manual
- June 9, 2024
- Shenzhen X Nego Industrial
Table of Contents
BLACK Rush Charge 5000mAH Mc Wireless Power Bank
User Manual
RCM50 G1 BLACK Rush Charge 5000mAH Mc Wireless Power Bank
MODEL: RCM5O-G1-BLCK
- LED Indicator
- USB-C Port (Output & Input)
- Foldable Stand
- Power Button
- Wireless Power Transmission Area
Content
1x Magnetic powerbank
1x 12in USB-C to USB-C Cable
1x12in USB-C to 3 in
(Lightning/ Micro USB /USB-C) Cable
2x Metal label sticker
Technical Specifications
To Charge The Powerbank
Connect the powerbank to power sources or USB port of a computer via Type-C
port. LED indicator will be light up if it is charging. Once the powerbank is
fully charged, please remove the charging cable from the product.| To
Charge Mobile Devices
By Cable: Connect your mobile device to the USB-C port of the powerbank
via charging cable, press power button to start charging.| Wireless:
Press the power button and the green LED will light up. Match the wireless
transmission area to the middle of a MagSafe device’s back, the magnet will
snap the powerbank on the device.
Power Indication
Press once | Blue LED on/ Green LED flashes 3 times |
---|
Wireless Charging Activated
LED Charge Meter| One blue LED: 1-25% Charged
Two blue LEDs: 25-50% Charged
Three blue LEDs: 50-75% Charged
Four blue LEDs: 75-100% Charged
*The LED lights are an approximate
representation of the available battery powe
Low battery warning| The first blue LED flashes
Wireless Charging| Green LED stay on
Press twice| Power off the Powerbank
Safety Notes
- Protect the product from dirt moisture and overheating and use it in dry rooms only
- Do not drop the product and do not expose it to any major shocks
- Do not operate the product outside the power limits given in the specifications
- Do not modify the device in any way. Doing so voids the warranty
- Do not continue to operate the device if it becomes visibly damaged
- Use the product for its intended purpose only
- Keep this product, as all electrical products, out of the reach of children
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight
- Lay all cables so that they do not pose a tripping hazard
- Do not bend or crush the cable
- Always pull directly on the plug when disconnecting the cable, never on the cable itself
- Dispose of packaging material immediately according to locally applicable regulations
- When charging batteries built into a device, pay attention to the maximum charging time for the batteries
Warranty Terms & Condition
The product comes with a twelve (12) month factory warranty from the date of purchase. Your product is in perfect condition. In the event where a replacement unit is needed, the owner must provide the original receipt of purchase in order to grant replacement, providing the defect falls under warranty terms. If your unit has been disassembled or repaired without the manufacturer’ s authorization, the warranty will be immediately voided. The owner is responsible for any fee and charges of delivering the unit back to the agent or manufacturer.
Explanation Of Warning Symbols And Notes
| This product is compliant with the FCC I directive
---|---
| This Product is Compliant with The Ce Directiv
| This symbol indicates uninsulated material all within your uniy may cause
an electrical shock. For safety, lease do not remove product covering.
| This symbol indicates direct current.
| This symbol indicates attention to features [Ail for which you should read
the enclosed literature closely to prevent operating andmaintenance problems
| Do not dispose of your product with other household waste. Please act
according to local rules on the separate collection of electrical and
electronicproducts and batteries. The correct disposal of these products helps
prevent potentially negative consequences on the environment and human health,
Manual Folding Method
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>