iTOUCH Mini Bluetooth Speaker User Guide
- June 9, 2024
- iTouch
Table of Contents
iTOUCH Mini Bluetooth Speaker
QUICK START GUIDE
Mini Bluetooth Speaker
- Speaker
- USB-C Charging Port
- Main Button
- LED Light Indicator
- Strap Hole
- Microphone
Series
- ITSPK34004-G02
- ITSPK34004-H03
- ITSPK34004-K03
- ITSPK34004-Q03
- ITSPK34004-W03
OPERATING INSTRUCTIONS
Charging the battery
- Insert the charging cable into the USB-C input port, connect the USB plug into a USB power source, the LED indicator will turn red.
- After charging is complete, the red LED indicator will turn off.
Bluetooth Pairing for Music/Phone Calls/Remote Camera
- Turn on the speaker by holding the Main Button for 3 seconds. The blue indicator will start flashing and a voice prompt will indicate that Bluetooth pairing is ready.
- Enable Bluetooth on your device.
- Search and connect to the Bluetooth speaker, named “Mini Voyage Speaker.” Once paired, the LED indicator will remain blue and a voice prompt will indicate a successful connection.
Note: In addition to playing music, the speaker can be used to answer phone calls by pressing the Main Button.
USING YOUR SPEAKER
Control the speaker by using the main button on the bottom of the speaker Click: Volume up (Playing music) Answer/Hang up (In a phone call) Capturing (Camera Mode) Double Click: Redial last phone call Long press for 3 seconds: Power On / Power Off
CHARGING
Working Time: 2-3 Hours Charging Time: 1-2 Hours (via USB-C Cable)
Note: while in pairing mode, the speaker will power off after 5 minutes if it does not connect to any device.
LED LIGHT INDICATOR
- Pairing Mode: Flashing BLUE
- Playing Music: Slow flashing BLUE
- Charging via USB-C Cable: RED LED Light
- Fully Charged: No LED Light (Light Off)
Specifications
- Product: Mini Bluetooth Speaker
- Bluetooth Version: V5.0
- Input: 5V/500Ma
- Power Output: 1W
- Battery Charging Time: 1-2 hours
- Play Time: About 2 hours
- Impedance: 401W
- Rechargeable Battery:3.7V/120mAh (Built-In)
REGULATORY NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferen ce to radio communications. However, there is no guarantee that interference will not occur in a particular install ation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reornent or relocate the rece iving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operated in conjunction with any other antenna or transmitter.
FCC ID
2AXA-MINISPEAKER
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>