Yamazaki Over the Door Hook Hanger Ply Instruction Manual
- June 9, 2024
- YAMAZAKI
Table of Contents
Yamazaki Over the Door Hook Hanger Ply Instruction Manual
Over-the-door Hook Hanger Ply
Thank you for purchasing this item from Yamazaki Inc. Please refer to the
following instructions before using the product. Please use it properly, and
take good care of it.
F itting instructions
How to Attach to a Door
Following the chart below, attach the two door hooks provided to the back of the product. Push the hooks from the top to the bottom of the pads and hang them on a door.
- Hang the product gently to avoid damaging the door
- Take care that it does not hinder the opening and closing of the door
COMPATIBLE DOORS
- The thickness of doors, folding doors must be approx. 2.7 to 3.6 cm. -There must be at least 3mm of open space between the door and the upper wall
This product is suited to work with standard size doors
Do not use this product on glass doors
How to attach to the wall
When attaching the product to a wall, first screw the two wooden screws provided into the wall the same distance apart as the holes on the back of the product. (When doing so, leave about 5mm of each screw sticking out of the wall)
COMPATIBLE WALLS
Pillars, Lintel, Wood, Printed Plywood Walls (Horizontally designed)
INCOMPATIBLE WALLS
-
Walls made of stone, plaster or mortar
-
Walls that are 5 mm or less of thin wood
-
Thick walls made of concrete, blocks or bricks
-
Tile or walls jointed with tile
-
5 hooks: Max loading weight 5lbs (2.5kg *lhook=0.5kg. The fittings pack contains small items which should be kept away from young children
(When doing so, leave about 5 mm of each screw sticking out of the wall)
Attach the product to the screws by the holes in the back and ensure that it
is secure. Test the strength of the screws and the product every once in a
while; if it becomes unsteady, move it to another location.
K Attach the product in a location where the screws will fit in the wall
Specification
Ply Oyer-the-door Hook Hanger
SIZE
- 17.7″w x 3.5″d x 4.1″h
- 45w x 9d x 10.5h cm
- 17.7″w x 1.6″d x 2.4″h
- 45w x 4d x 6h cm
MATERIAL
- Steel
- Wood
Made In China. Designed In Japan
Customer Service Center
Imported by:
YAMAZAKI EUROPE GmbH
Immermannstr. 33, 40210 Dusseldorf, Germany
YAMAZAKI USA Inc.
67 West St, Brooklyn, NY 11222 United States
YAMAZAKI Co., Ltd.
AAtliOSINett 0112M851-1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>