maono PD100 Studio Dynamic XLR Microphone User Manual

maono PD100 Studio Dynamic XLR Microphone User Manual

Introduction

Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference.

Safety precaution

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.

Cautions for the product

• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury
• Do not store the product under direct sunlight, near heating devices or in a hot. humid or dusty place.
• Do not place the product on an unstable surface to avoid injury or malfunction due to falling or the like.

Notes on use

• Be sure to read the connected device’s user manual before use.
• When the product is used for a long time, the product may become discolored due to ultraviolet light (especially direct sunlight) and wear.
• Make sure to hold the plug when connecting and disconnecting the cable. The cable may become severed or an accident may occur if you pull on the cable itself.
• When using the cable. be careful not to twist it to prevent damage to the cable.
• Do not wind the cable at the base of the plug to prevent a disconnection.
• When plugging the cable into the microphone and the connected device, check that the connector is facing in the correct direction before inserting it straight. Inserting the connector or plug diagonally may cause a malfunction.
• For important recordings, perform a trial recording beforehand to make sure that the sound is recorded correctly.
• Maono will not be liable in any way for any loss or damage to software or data connected to the product.

Packing List

| | |
---|---|---|---
XLR Dynamic Microphone xl| Desktop Stand xl| XLR-XLR Audio Cable xl| User Manual xl

Product Description

Maono PD100 is a dynamic microphone with a cardioid polar pattern to reduce background noise for a cleaner audio. There is a standard XLR output on the microphone for connecting audio interfaces or mixers. The full metal body delivers excellent shielding performance and durability. The PD100 microphone also includes all metal stand system to connect with a boom arm or place on desk. It is with professional-level performance and is suitable for streaming, gaming, podcasting, etc. It works great with Maonocaster AME2 or AMC2 and maono latest audio interface.

Product Features

• Cardioid polar pattern
• XLR output
• Metal body to shield electricity interference
• Includes a desktop stand
• Compatible with XLR audio interfaces or mixers

Specification

Product Overview

Product usage

Attach the microphone to a desktop stand

1. Connect the microphone to an audio mixer using XLR-XLR cable.
   

2. Ensure the microphone grill faces audio source.
   

Attach the microphone to a boom arm

1. Turn the table stand clockwise to uninstall it.

2. Turn the microphone counterclockwise to install microphone to a boom arm.
   

3. Plug the XLR-XLR audio cable. Ensure the microphone grill faces audio source.
   

Technical support: support@maono.com www.maono.com
Final clause: Information and data contained in this manual are subject to change without notice in advance.

CUSTOMER SUPPORT

Company: CET PRODUCT SERVICE LTD.
Address: Chase Business Centre. 39-41 Chase Side. London N14 58P
United Kingdom
Email: inlo.celservice@gmaiLcom
TEL: +447419325266

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>