maono AU-AM200-S1 Audio Interface with DJ Mixer and Sound Card Instructions
- June 5, 2024
- maono
Table of Contents
Manolo
AU-AM200-S1 Audio Interface with DJ Mixer and Sound Card
Instructions
AU-AM200-S1 Audio Interface with DJ Mixer and Sound Card
MAONO AU-AM200-S1 2 Year Limited Warranty/lifetime of after-sale consulting
service
AU-AM200-S1 podcast bundle is covered by a limited warranty for two (2) years
from the date of purchase and provides a lifetime of after-sale consulting
service. Free
replacement to products that are NOT damaged resulting from accident,
alteration, misuse, negligence, or abuse. If exceeding 30 days of Amazon
return policy, you can still
contact us via the following two ways: click Ask Seller or MAONO on your order
page or through our Shopify.
We will serve you with full sincerity!
Shopify link: https://www.maono.com/
E-mail: [email protected]
| Questions | Answers |
|---|---|
| 1. Cannot boot | • Please check if the podcast console has power, please |
charge it, and then turn it on.
• You need to long-press the ” ” for more than three seconds to turn it on.
2. No sound from accompaniment music
| • Please check whether the external audio source is connected to the ‘Music
Input’ interface of the podcast console.
• Please check whether the ‘Music’ volume control knob on the right is turned
on.
• Please check the volume of the accompaniment device.
• Turn on LOOP BACK
3. No sound from headphones
| • Please check whether the headphone cable is inserted into the correct
interface. It should be inserted into the “headset” or “Output” interface.
• Please check whether is the “Monitor” of the sound card upwards. You can
gradually increase the volume by sliding it up.
• Plug headphones into the OUTPUT or HEADSET jack
4. No sound from the microphone
| • Please check whether the microphone is correctly connected to the
microphone interface. If not, please try again.
• Please check whether the microphone knob on the left is turned on. Turn the
knob clockwise to increase the microphone volume slowly.
• Please check whether is the “monitor fader” of the sound card upwards. You
can gradually increase the volume by pushing it up.
• Please confirm with your microphone dealer whether your microphone can be
used with this podcast console, or consult us for the recommended microphone
model.
5. No sound in a live broadcast
| • Please check whether the “recording” knob on the podcast console is
turned on, and rotate the “recording
knob” clockwise to slowly increase the volume of the live broadcast.
• Please check whether the podcast console “MAONO AU-AM200″ has been set as
the default playback and recording device of the live broadcast software. If
not, please set refer to the ” Live Streaming on the Computer ” part.
• Turn on LOOP BACK
6. Echo issues| Turn off or turn down the ECHO effect
7. Sidechain function not working| It doesn’t work on a voice call, it
works on a podcast or live streaming
8. The noise reduction effect is not good| Please keep 2 inches away
from your mouth from the microphone
9. Can not be used on iPhone| We don’t provide an extra OTG adapter,
you should connect your phone with the microphone through the OTG adapter
which is included in your iPhone
10. This audio interface can not be used with a USB/XLR to XLR/USB C
microphone even though using an adapter| This audio interface just can
only be used with a microphone which comes with a 3.5mm plug
11. Can not be used with guitar| It should be connected with a 3.5mm to
6.35mm adapter， then to a guitar
12. Before powering on| please turn down all the volume temporarily
13. How to connect to a computer
| • Please use line 1 to connect to the USB-C port of the Audio interface,
and use line 2 to connect to the computer. (Note: Do not fold the wire during
use to avoid damage.)
• Please check the computer’s sound settings after the connection is complete.
Both the input and output are’ MAONO AU-AM200 ‘(right-click the speaker on the
right side of the desktop to open the sound settings)
• When you need to record the computer accompaniment sound, please turn on the
loopback function.
14. How to connect to the smartphone| For the smartphone used for
podcast/ Streaming, please insert THE POD1/2/3 interface; for the smartphone
used for playing accompaniment, please insert the Music Input jack. In
addition, you can also play accompaniment Music through the Bluetooth
connection of the smartphone.
15. How to set the volume of preset sound effects and customize sound
effects| OPENING is the volume down key, and LAUGHTER is the volume up key.
16. The light on the audio interface can be turned off| You need to
press the light button on the side of the sound card 6 times, and the light of
each button will slowly diminish to disappear.
17. Bluetooth transmission is a one-way transmission| that cannot be
input and output simultaneously. (The Bluetooth is only for wireless
accompaniment playback)
18. If you can monitor your voice, but your audience cannot hear your
voice| you need to turn up the REC knob above the audio mixer to output the
sound.
19. For now, the monitoring function cannot be turned off.| We are
working on an upgraded version that can turn off the monitoring function, so
stay tuned.
20. How to connect two microphones at the same time| First of all,
please make sure that your two microphones are 3.5MM microphones, you can
directly insert the two microphones into the Mixer and then connect your
mobile phone, headset, or other devices to use it normally.
21. How to upload custom sound effects
| Power on the product and connect it to any one of the microphones, external
audio input device, or Bluetooth device.
Turn on “LOOPBACK” mode.
Press and hold any custom key until the key light flashes to start recording.
The audio input will be recorded and saved.
Release the button to end the recording.
22. Can I use it on my iPhone/iPad to play music and use it as a mixer?|
Yes, if you only use your iPhone/IPad as the audio source, you can plug it
into the Music Input jack
23. How to adjust the output volume on a PC?| Turn on the output device
of the computer and directly adjust it
24. The output volume cannot be adjusted when connected to a mobile
phone| If your mobile phone is used as accompaniment music, it can be used
by inserting it into the Music Input interface, but as a live mobile phone,
when it is inserted into the Pod interface, the volume cannot be adjusted.
25. Pitch/Effect button is invalid
| Please use the four-segment audio cable included in the package to connect
to your phone
If it is a mobile phone used for live broadcast, you need to plug it into the
Pod interface. If you plug it in, these functions may not work on the Music
input interface.
26. What should I do if I can’t charge the battery?
| Use the charging cable we have configured to charge, but don’t use the wire
1 we have configured to charge, as wire 1 is there to protect the connected
mobile device and limit the current
If you are connecting to a Mac series computer or mobile phone, please do not
use the USB-C TO USB-C cable directly. Use our USB-C TO USB-A charging cable,
then USB-A TO UAB-C or to Lightning cable
27. How to use two microphones to monitor together| You can plug the
1/8′ jack on your headphones into the Headset and Output ports
28. What software can be used with the sound card on WIN10?| AU,
Audacity, sound forge
29. Can it be used together with a dynamic microphone via a 6.35mm-3.5mm
adapter?| Our interface does not support dynamic microphones, but 6.35mm
condenser microphones can be used on our sound card through adapters
How long is the recording time for custom sound effects?| 20 seconds
30. Is it possible to connect a USB microphone to the PC at the same time
as it is
connected to the PC to achieve the effect of using a USB microphone
| No, the computer only allows input from one microphone device
31. Is it used for wireless microphones, and the Mic port is inserted into
the receiver of the wireless microphone?| Can not
32. Will the sound be pushed from your computer to the headset? Or do you
only hear yourself speaking? How do I adjust the overall game volume?|
Yes, you can hear the sound by plugging in the headphones. Just hear yourself
talking without ambient noise, just turn on noise reduction, increase the
volume of the headphones and use the sound card knob to adjust
33. How do I connect an RCA stereo source to the device?| Yes, it can
only be input into the sound card when plugged into the accompaniment. It is
very troublesome to switch to 3.5
34. The sound effect is not sent to the output jack with your voice, so it
is not recorded.
This is real?| No, our sound effects are functions as outputs
35. Can I take an incoming call from Skype (via my laptop) and then use
this soundboard mixer to record via Audacity?| Yes
36. Does this system require a computer connection? Can I hook it up to
speakers so I can play sound from multiple devices on one speaker?| It
can be used with a mobile phone alone and can play the sound of multiple
devices, such as: using a computer as an accompaniment, speaking with a
microphone
37. Is it applicable to Linux?| Of course, MAONOCASTER supports Linux
systems.
---|---
References
- Professional Audio Microphone | MAONO Online®Store
- Professional Audio Microphone | MAONO Online®Store