INTERMATIC PE653RC MultiWave Wireless Pool and Spa Control System Instructions
- June 2, 2024
- Intermatic
Table of Contents
=
MultiWave™ Wireless Pool and Spa Control System
Service Mode Instructions Model PE653RC
IMPORTANT INSTRUCTIONS
• SAVE THESE INSTRUCTIONS
PE653RC MultiWave Wireless Pool and Spa Control System
WARNING Risk of Fire or Electric Shock
- Service mode should not be used for servicing the pump or other pool equipment.
- Disconnect power at the circuit breaker(s) or disconnect switch(es) before installing or servicing pool equipment.
Service Mode allows you to manually turn the filter pump ON or OFF,
without the use of a controller, by pushing the appropriate buttons on the
PE653 receiver. When turning a pump ON, a countdown period of 1,2,3,4 or 5
hours is set that will override the schedule, ensuring proper mixing of
chemicals. At the end of the user-defined period, the PE653 will turn the pump
OFF and resume the normal programmed schedule.
To Activate Service Mode: Press and hold button #1 on the PE653 receiver
until the indicator light starts blinking for Circuit
- Then, press button 1, 2, 3, 4, or 5 to set the duration, in hours, you want the pump to be ON. The Circuit 1 light will continue to blink for the duration of the service mode.
To Deactivate Service Mode: Press and hold button #1 on the PE653 receiver until the indicator light stops blinking (approx. 5 seconds).
INTERMATIC INCORPORATED
SPRING GROVE, ILLINOIS 60081-9698
http://www.intermatic.com
http://waterheatertimer.org/Digital-control-centers-and-manuals.html#PE653RC
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>