EVER CHILL SRM-418CB-C 16.2 cuft 110 volt 4 Door French Black Stainless Steel Doors Instruction Manual
- June 2, 2024
- EVER CHILL
Table of Contents
Built-in Vehicle
FROST-FREE REFRIGERATOR-FREEZER
INSTRUCTION MANUAL Model No.: SRM-418CB-C 302125
Dear users, this manual contains the product’s basic knowledge, how to use it, fault diagnosis and basic troubleshooting methods. In order to better understand and use this product, please take good care of this manual, and read it carefully.
IMPORTANT SAFETY INSTRUCTIONS
| CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN|
---|---|---
| This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within your refrigerator.
---|---
| This symbol indicates that there are important operating and maintenance
instructions in the literature accompanying your refrigerator.
---|---
WARNINGS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use your refrigerator near water.
- Clean only with a damp cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Refer all servicing to qualified service personnel. Servicing is required when your refrigerator has been damaged in any way, such as liquid has been spilled or objects have fallen into your refrigerator, your refrigerator has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To reduce the risk of fire or electric shock, do not expose your refrigerator to rain, moisture, dripping, or splashing, and no objects filled with liquids should be placed on top of it.
- Your refrigerator is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of your refrigerator by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with your refrigerator.
ELECTRIC SHOCK HAZARD
Failure to follow these instructions can result in electric shock, fire, or
death.
-
WARNING–Keep ventilation openings, in both your refrigerator and the built-in structure, clear of obstruction.
-
WARNING–Do not touch the interior of your refrigerator with wet hands. This could result in frostbite.
-
WARNING–Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
-
WARNING–Do not damage the refrigerant circuit.
-
WARNING–Do not damage the refrigerant tubing when handling, moving, or using your refrigerator.
-
WARNING–DANGER-Never allow children to play with, operate, or crawl inside your refrigerator. Risk of child entrapment. Before you throw away your old refrigerator:
Take off the door.
Leave the shelves in place so that children may not easily climb inside. -
WARNING-Do not use electrical appliances inside the food storage compartments of the appliance unless they are of the type recommended by the manufacturer.
-
WARNING-To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions.
-
Power source disconnected your refrigerator before carrying out user maintenance on it.
-
If a component part is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified persons in order to avoid a hazard.
-
Follow local regulations regarding disposal of your refrigerator due to flammable refrigerant and gas. All refrigeration products contain refrigerants, which under the guidelines of federal law must be removed before disposal. It is the consumer’s responsibility to comply with federal and local regulations when disposing of this product.
-
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
-
This appliance is intended to be used in the recreational vehicle.
-
Disposal of your old appliance: By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
-
If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
There is a power switch for the refrigerator. Before any maintenance, please disconnect the switch.
WARNING
This appliance should be properly grounded for your safety. The power cord of
this appliance is equipped with a three-prong plug which mates with the
standard three prong wall outlets to minimize the possibility of electrical
shock.
Do not, under any circumstances, cut or remove the third ground prong from the
power cord supplied.
This refrigerator appliance requires a standard 115VAC /60Hzelectrical outlet
with three-prong ground.
This refrigerator appliance is not designed to be used with an inverter.
The cord should be secured behind the appliance and not left exposed or
dangling to prevent accidental injury.
Never unplug the refrigerator by pulling the power cord. Always grip the plug
firmly and pull straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too
short, have a qualified electrician or service technician install an outlet
near the appliance. Use of an extension cord can negatively affect the
performance of the unit.
Improper use of the grounded plug can result in the risk of electrical shock.
If the power cord is damaged, have it replaced by an authorized service
center.
Features and parts
- Lamp
- Upper Balcony on Fridge Door
- Fridge Door
- Crisper
- Lower Balcony on Freezer Door
- Galss Shelf
- Crisper Cover
- Crisper
- Upper Freezer Compartment
- Lower Freezer Compartment
- Adjustable Feet
Due to technological innovations, the product descriptions in this manual may not be completely consistent with your refrigerator. Detailed information is in accordance with the final product.
Preparations for use
Installation location:
-
Ventilation condition
The position you select for the refrigerator installation should be well- ventilated and has less hot air. Do not locate the unit near a heat source such as cooker, and avoid it from direct sunlight, thus guaranteeing the refrigerator effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent it from rusting and leaking electricity.
Note: The amount of refrigerant charged for the unit can be found on the nameplate. -
Heat dissipation space
When working, the unit gives off heat to surroundings. Therefore, at least 300mm(11.8”) of free space should be spared at the top side, more than 100mm(3.9”) on both sides, and above 50mm(2”) at the side of the refrigerator.
Dimensions suggested below:W| D| H| A| B| C( )| E| F
---|---|---|---|---|---|---|---
753(29.6″ )| 678(26.7″)| 1846(72.7″)| 1188(46.8″)| 1000(39.4″)| 122| 50(2″)| 200(7.9″)
Note:Figure 1, Figure 2 only illustrate the space demand of the product.
-
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration and noise.
When the refrigerator is placed on such flooring materials as carpet, straw mat, polyvinyl chloride, the solid backing plates should be applied underneath the unit, so as to prevent color change due to heat dissipation. -
Fixing the refrigerator to the closet
The user can install the screw into the holes on the inner cabinet to fix the refrigerator to the RV closet, pls see below photos: -
Fixing the glass shelves in the refrigerator room
The glass shelves in the refrigerator room will be fixed in the production. For the safety consideration, the glass shelves are prohibited to move.
Unobstructed ventilation shall be maintained around the unit or in an embedded structure.
Preparations for use
-
Standing time After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the refrigerator after more than 1 hour’s standing, so as to ensure its normal operation.
-
Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth. -
Power-on
Connect the refrigerator power supply to the dedicated power supply in the RV, then the compressor starts working. After 1 hour, open the freezer door, if the compartment internal temperature drops significantly, it indicates the refrigeration system is working normally. -
Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled according to the user’s temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3 hours to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully cooled (Try to open the refrigerator door as less as possible before the internal temperature cools down).
When used in an ambient temperature of higher than 50 ℃, in order to guarantee the service life and function of the electronic components of the refrigerator, it may not get started at the first time or not be cooling.
Functions
CONTROL PANEL
Use your appliance according to the following control regulations, your
appliance has the corresponding functions as the control panels showed in the
pictures below.
OPERATION DESCRIPTION
Press “unlock” button for 3 seconds to be unlock state, then you can press
other buttons for operation Touch the “ROOM” button, the light of the current
room will flash, and then press the “ROOM” button again, you can choose
between the fridge room and freezer room. If there is no operation for more
than 5S, the current function will be started.
Under unlock state, touch the “TEMPERATURE” button, the temperature of
compartments will be changed accordingly. Press “MODE” button shortly to
select the different modes.
-
Temperature display
Every time when the refrigerator system is powered up, the setting temperature of the refrigerator will be displayed in Fahrenheit by default. When the display is under “lock” state, you can switch between the Fahrenheit display and the Celsius display by holding down the “ROOM” key for 5s.
Correspondence between the temperatures goes as follows Fridge temp. display| Freezer temp. display
---|---
Fahrenheit (℉)| Celsius (℃)| Fahrenheit (℉)| Celsius (℃)
34| 1| 3| -16
35| 1| 2| -17
36| 2| 1| -17
37| 2| 0| -18
38| 3| -1| -18
39| 3| -2| -19
40| 4| -3| -20
41| 5| -4| -20
42| 5| -5| -21
43| 6| -6| -21
| | -7| -22
| | -8| -22 -
Fridge temperature setting
Under unlock state, press the “ROOM” key to select the fridge zone until the corresponding icon gets flickering, and then press the “TEMPERATURE” key to set the temperature as desired, after the icon stop flickering, the setting will take effect.
The fridge temperature setting cycles as following:
3℃→4℃→5℃→6℃→OF→1℃→2℃→3℃; 38℉→39℉→40℉→41℉→42℉→43℉→OF→34℉→35℉→36℉→37℉→38℉ OF indicates the fridge is switched off, and when the OF function takes effect, the fridge will stop cooling. -
Freezer temperature setting
Under unlock state, press the “ROOM” key to select the freezer zone until the corresponding icon gets flickering, and then press the “TEMPERATURE” key to set the temperature as desire, after the icon stop flickering, the setting will take effect.. The freezer temperature setting cycles as following:
-22℃→-21℃→-20℃→-19℃→-18℃→-17℃→-16℃→-22℃;-8℉→ -7℉→ -6℉→ -5℉→ -4℉→ -3℉→ -2℉→ -1℉→ 0℉→ 1℉→ 2℉→ 3℉→ -8℉
MODE DESCRIPTION
MODE SETTING
Under unlock state, the current mode will flash. You can choose between smart,
quick cooling, super freeze, and holiday four modes by pressing the “MODE”
button. If there is no operation for more than 5S, the current mode on the
display will start, then the settings take effect.
SMART COOLING MODE
The refrigerator will adjust the temperature automatically according to the
ambient temperature and the temperature inside the refrigerator, you do not
have to choose the temperature by yourself, save your time and effort.
-
Enabling the Smart Cooling mode
Press the “MODE” key to select Smart Cooling mode until the corresponding icon gets flickering. When the icon stops flickering, the Smart cooling mode will be valid. -
Exiting the Smart Cooling mode
Under the Smart cooling mode, press the “MODE” key to make the corresponding icon get flickering, then press the “MODE” key and select other mode. The Smart cooling function will exit.
When the Holiday or Super Freeze function is enabled, the Smart Cooling mode will be disabled automatically.
QUICK COOLING MODE
In this mode, the temperature of fridge compartment will reach setting
temperature quickly, which will help to keep the food fresh. If you want to
put much food in the refrigerator at once, please choose this mode.
-
Enabling the Quick Cooling mode
Press the “MODE” key to select Quick Cooling mode until the corresponding icon gets flickering. When the icon stops flickering, the Quick Cooling mode will be valid -
Exiting the Quick Cooling mode
Under the Quick Cooling mode, press the “MODE” key to make the corresponding icon get flickering, then press the “MODE” key and select other mode. The Quick Cooling mode will exit.
SUPER FREEZE MODE
The food will be frozen in a short time. Note: This mode has a duration of 6
hours and a duration of 48 hours for both time modes to be chosen. When
entering the super freeze function normally, it defaults to a 6 hour quick
time mode. If you need to enter the 48 hour super freeze function you also
need to do the following: when the super freeze function has been effective,
press the “ROOM” button for 5 seconds, enter the set frozen time selection,
frozen temperature display area display the current freezing time (unit:
hours), the remaining icons are not displayed; then press the “ROOM” key for
5s to set the super freeze time, by pressing the “MODE” key, you can set the
order of 48-6-48…-6 cycles. 5s no key operation, the current setting will
take effect, and return to the normal state. Super Freeze mode takes effect
immediately after you have finished setting, and automatically exits and
returns to normal control when the super freeze time is up.
-
Enabling the Super Freeze mode
Press the “MODE” key to select Super Freeze mode until the corresponding icon gets flickering. When the icon stops flickering, the Super Freeze mode will be valid. -
Exiting the Super Freeze mode
Under the Super Freeze mode, press the “MODE” key to make the corresponding icon get flickering, then press the “MODE” key and select other mode. The Super Freeze mode will exit.
HOLIDAY MODE
When you and your family intend to go on holiday, you can choose this mode.
The fridge and freezer compartment will match the appropriate temperature in
this mode automatically.
-
Enabling the Holiday mode
Press the “MODE” key to select Holiday mode until the corresponding icon gets flickering. When the icon stops flickering, the Holiday mode will be valid -
Exiting the Holiday mode
Under the Holiday mode, press the “MODE” key to make the corresponding icon get flickering, then press the “MODE” key and select other mode. The Holiday mode will exit.
Be sure to take out all foods from the fresh food compartment before
setting this function.
Under the Holiday mode, the fridge temperature is subject to no change.
FAULT DISPLAY
Fault display shows as following under Fault mode:
ERROR CODE | ERROR TYPE |
---|---|
UC | Communication failure or model mismatch |
RS | Sensor failure (refrigerating chamber) |
CS | Sensore failure (Drinks box) |
FS | Sensor failure (freezing chamber) |
Fd | Defrosting sensor failure |
FF | Fan failure |
ES | Failure of ambient temperature sensor |
Instructions for food storage
Precautions for use
- The appliance might not operate consistently (there is possibility of defrosting or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold limit of the temperature range for which the refrigerating appliance is designed
- The internal temperature could be affected by such factors as the location of refrigerating appliance, ambient temperature, and frequency of door open, etc., and if appropriate, a warning that setting of any temperature control device might have to be varied to allow for these factors should be made.
- Effervescent drinks should not be stored in the freezer compartment or the low-temperature compartment.
Food storage location
Due to the cold air circulation in the refrigerator, the temperature of each
area in the refrigerator is different, so different kinds of food should be
placed in different areas.
The fresh food compartment is suitable for the storage of such food as need
not to be frozen, the cooked food, beer, eggs, some condiments that need cold
preservation, milk, fruit juice, etc. The crisper box is suitable for the
preservation of vegetables, fruits, etc.
The freezer compartment is suitable for the storage of ice cream, frozen food
and the foods to be preserved for a long time.
Use of the fresh food compartment
Crisper box: Pull out the crisper box for access to food. After using or
cleaning the cover plate of the crisper box, be sure to put it back onto the
crisper, so that the internal temperature of the crisper box will not be
affected.
Cautions for food storage
You’d better clean the foods and wipe them dry before storing them inside the
refrigerator. Before foods are put in the refrigerator, it is advisable to
seal them up, so as to prevent water evaporation to keep fresh fruits and
vegetables on one hand, and prevent taint of odor on the other hand.
Do not over pack the refrigerator compartment. Keep enough space between
foods; if too close, the cold air flow will be blocked, thus affecting the
refrigeration effect. Do not store excessive or overweight foods, to avoid
the shelf from being crushed. When storing the foods, keep a distance away
from the inner wall; and do not place the water- rich foods too close to the
fridge rear wall, lest they get frozen on the inner wall.
Categorized storage of foods:Foods should be stored by category, with the
foods you eat every day placed in front of the shelf, so that the door open
duration can be shortened and food spoilage due to expiration can be avoided.
Energy-saving tips: Allow hot food to cool down to room temperature before
putting it in the refrigerator. Put the frozen food in the fresh food
compartment to thaw, using the low temperature of the frozen food to cool the
fresh food, thus saving energy.
Storage of fruits and vegetables
In the case of refrigerating appliances with chill compartment, a statement to
the effect that some types of fresh vegetables and fruits are sensitive to
cold and therefore are not suitable for storage in this kind of compartment
should be made.
Use of the frozen food storage compartment
The freezer temperature is controlled below -16℃, and it is advisable to store
the food for long-term preservation in the freezer compartment, but the
storage duration indicated on the food packaging should be adhered to.
The freezer drawers are used to store food that needs to be frozen. Fish and
meat of large block size should be cut into small pieces and packed into
fresh-keeping bags before they are evenly distributed inside the freezer
drawers.
Energy saving tips
- Let hot foods cool to room temperature before placing in the refrigerator.
- Be sure to wrap foods properly, and wipe container dry before placing them in the refrigerator. This cuts down on frost build-up inside the refrigerator.
- Organize and label food to reduce door openings and extended searches.
Tips for shopping the frozen foods
- When you are buying frozen food, look at the Storage Guidelines on the packaging. You will be able to store each item of frozen food for the period shown against the star rating. This is usually the period stated as “Best to use them before×”, found on the front of the packaging.
- Check the temperature of the frozen food cabinet in the shop where you buy the frozen foods.
- Make sure the frozen food package is in perfect condition.
- Always buy frozen products last on your shopping trip or visit to the supermarket.
- Try to keep frozen food together whilst shopping and on the journey home, as this will help to keep the food cooler.
- Don’t buy frozen food unless you can freeze it straight away. Special insulated bags can be bought from most supermarkets and hardware shops. These keep the frozen foods cold longer.
- For some foods, thawing before cooking is unnecessary. Vegetables and pasta can be added directly to boiling water or steam cooked. Frozen sauces and soups can be put into a saucepan and heated gently until thawed.
- Use quality food and handle it as little as possible. When foods are frozen in small quantities, it will take less than for them to freeze up and thaw.
- Estimate the amount of foods to be frozen up. When freezing large amounts of fresh food, adjust the temperature control panel to the low mode, with the freezer temperature lowered. So, foods can be frozen up in fast manner, with the food freshness well kept.
Tips for special needs
Moving the refrigerator/freezer
-
Location
Do not place your refrigerator/freezer near a heat source, e.g. cooker, boiler or radiator. Avoid it from direct sunlight in out-buildings or sun lounges. -
Leveling
Make sure to level your refrigerator/freezer using the front leveling feet. If not level, the refrigerator/freezer door gasket sealing performance will be affected, or even it may lead to the operating failure of your refrigerator/freezer.
After locating the refrigerator/freezer in position, wait for 4 hours before using it, so as to allow the refrigerant to settle. -
Installation
Do not cover or block the vents or grilles of your appliance.
When you are not in the RV for a long time -
If the appliance will not be used for several months, turn it off first, and then disconnected the power source.
-
Take out all foods.
-
Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door ajar: block it open or have the door removed if necessary.
-
Keep the cleaned appliance in a dry, ventilated place and away from the heat source, place the appliance smoothly, and do not place heavy objects on top of it.
-
The unit should not be accessible to child’s play.
Maintenance and cleaning
When cleaning,Do not stretch your hands into the bottom of the refrigerator,
since you might be scratched by sharp metal corners.
Internal cleaning and external cleaning The food residuals in the refrigerator
are liable to produce bad odor, so the refrigerator must be cleaned regularly.
The fresh food compartment is usually cleaned once a month.
Remove all shelves, crisper box, bottle racks, cover board, and drawers etc.,
and clean them with a soft towel or sponge dipped in warm water or neutral
detergent.
Clear off the dusts accumulated on the rear panel and side plates of the
refrigerator often.
After using detergent, be sure to rinse it with clean water, and then wipe it
dry.
Do not use bristle brush, steel wire brush, detergent, soap powder, alkaline
detergent, benzene, gasoline, acid, hot water and other corrosive or soluble
items to cleanse the cabinet surface, door gasket, plastic decorative parts,
etc., so as to avoid damage.
Carefully wipe dry the door gasket, clean the groove. After the cleaning, fix
the four corners of the door gasket first, and then embed it segment by
segment into the door groove.
Interruption of power supply or failure of the refrigerating system
- Take care of the frozen foods in the event of an extended non-running of the refrigerating appliance (such as interruption of power supply or failure of the refrigerating system).
- Try to open the refrigerator door as least as possible, this way food can safely and freshly be kept for hours even in hot summer.
Defrosting
This appliance is designed with automatic defrosting function, thus no need to
defrost it manually.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low
energy consumption and long service life. In case of any abnormality, please
contact the after-sales personnel service.
How to disassemble the parts.
Fridge door bottle rack:
Hold the bottle rack with both hands, and then push it up.
Simple fault analysis and elimination
You can solve many common refrigerator problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service.
Case | Inspection | Solutions |
---|---|---|
•Completely nonrefrigeration | •Power source connected is OK? |
•Are breakers and fuses broken?
•No electricity or line trip?| •Refer to the wiring diagram, check the power
wiring connection.
•Opening the door and checking whether the lamp is lit.
•Check fuse
•Abnormal noise| •Is refrigerator stable?
•Does refrigerator contact the wall?| •Adjusting refrigerator’s leveling feet.
•Off the wall.
•Poor refrigerating efficiency| •Do you put hot food or too much food?
•Do you open the door frequently?
•Do you clip food bag to the door gasket?
•Direct sunlight or near a furnace or stove?
•Is it well-ventilated?
•Temperature setting in too high?| •Putting food into refrigerator when hot
food becomes cool.
•Checking and closing the door.
•Removing the refrigerator from the heat source.
•Emptying the distance to maintain good ventilation..
•Setting to the appropriate temperature.
•Peculiar smell in refrigerator| •Any spoiled food?
•Do you need to clean refrigerator?
•Have you packed food of strong flavors?| •Throwing away spoiled food.
•Cleaning refrigerator.
•Packing food of strong flavors.
The light is not working;| •Check LED light damaged?
•Open the door too long?| •The LED light may be damaged
•The control system has disable the lights due to the door being kept open too
long, close and reopens the door to reactivate the lights.
Note: If the above descriptions are inapplicable to troubleshooting, do
not disassemble and repair it yourself.
Repairs carried out by inexperienced persons may cause injury or serious
malfunctioning. Contact the local store where your purchase was made. This
product should be serviced by an authorized engineer and only genuine spare
parts should be used.
When the refrigerator is not in use for long periods, disconnect from the
electricity supply, empty all foods and clean it, leaving the door ajar to
prevent unpleasant smells.
3002 Coast Ct
Elkhart, IN 46514
574-971-4490
Documents / Resources
| EVER
CHILL SRM-418CB-C 16.2 cuft 110 volt 4 Door French Black Stainless Steel
Doors
[pdf] Instruction Manual
SRM-418CB-C, 16.2 cuft 110 volt 4 Door French Black Stainless Steel Doors,
French Black Stainless Steel Doors, Stainless Steel Doors, SRM-418CB-C
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>