JUYAN 6S Wireless Headphones Instruction Manual

JUYAN 6S Wireless Headphones

Package Contents

Before Use

1. Turn off the headset use the charging cable to connect the charger/computer/charging bank/etc to charge;
   Note: Before using the headset for the first time charge for at least 2 hours;

2. The red LED will turn on to indicate that the unit is charging: Once fully charged, the red LED will tum blue.
   Tips: Do not turn on the headset when charging headset, or else it will lower the quality and the life of battery.

Connect

1. Place headset within 35tt from Bluetooth-enabled device.
2. Long press, the headset will be turned on. You will hear a prompt
3. After opening the phone Bluetooth, click the < 6S> to pairing.
4. The headset will automatically turn off after three minutes without pairing.
   NOTE: If the red and blue lights flash alternately the Bluetooth is not connected; The BLUE light is always on, indicating that the Bluetooth is connected; Red light always on, indicating that the headset is low battery/turn off/charging.

Audio Line

Operation

1. * Power on/Off

   • Turn on/off the headphone
2. • Next/Volume+
   • Press once: the next song/channel
   • Long press: increase the volume
3. • MIC
4. • Indicator light
5. • Audio /O Interface
   • Connect the external device with 3.5mm audio cable, to achieve audio Output, e.g. speaker.
6. • TF card slot
   • Insert TF card, playing MP3 song files
7. • Previous/Volume
   • Press once: the previous song/channel
   • Long press: decrease the volume
8. • Type-C
9. • Play/pause/call control
   • Control music and calls
10. • Equalizer/Bluetooth/FM/TE
    • Press once to change the sound effect(6 choices);
    • Long press 3s to switch the mode among Bluetooth, FM, TE

Safety Information

• lf no pairing connection after the headset enters the pairing mode, please tum off the headset to save power.
• Do not perform other operations while pairing the headset to prevent the program error.
• Please select a proper volume while using to prevent damage to your ears.
• Please note that a good environment for using the headset can avoid damage to the headset
• Please charge the headset after a long time of none-use.
• When it’s charging with a USB cable, please turn off the power in order to avoid noise.

Reset
If headphones have any connection or function problems, please reset the headphones.

1. Delete the Bluetooth pairing information on the phone.
2. Long press the M button for 3 seconds until the flash quickly with red and blue.
3. Connect to the phone Bluetooth again. (If the above operation does not work.please try again.)

Specifications

Q&A

• Q: Does the Mic work while wired?
  A: Yes; You need to plug in the 3.5mm audio cable. In order to ensure better sound reception.you can call at the microphone

• Q: Can Bluetooth headphones be paired with multiple devices?
  A: lt is recommended that you do not connect two devices at the same time, which may cause Bluetooth interruption or channel error; If another device not needed, it is recommended to cancel Bluetooth pairing directly

• Q: How to use FM mode?
  A: Long press the M key to enter the radio mode. Continue to press the middle key to search for the radio signal. The radio mode can only sound after searching for the radio signal.

• Q: What if the Headphones is defective OR it just doesn’t meet your expectation?
  A: We admit that the headphones might be defective on rare occasions. If that happens, Please contact us,and we will give you a satisfactory reply within 24 hours.

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical& Electronic Equipment)
This Marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business Users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies With part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of Ocm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>