Hong Kong Juyan Technology ANC918 Active Noise Cancelling Bluetooth Over Ear Headphone User Manual

June 9, 2024
Hong Kong Juyan Technology

Hong-Kong-Juyan-Technology-LOGO

Hong Kong Juyan Technology ANC918 Active Noise Cancelling Bluetooth Over

Ear Headphone

Hong-Kong-Juyan-Technology-ANC918-Active-Noise-Cancelling-Bluetooth-Over-
Ear-Headphone-PRODACT-IMG

Packing List

Hong-Kong-Juyan-Technology-ANC918-Active-Noise-Cancelling-Bluetooth-Over-
Ear-Headphone-FIG-1

Product function instruction

  1. :Volume up/Next song
  2. Power on/off,Music play/pause
  3. Volume down/Previous song
  4. Bluetooth indicator,charging indicator, ANC indicator
  5. 3.5mm jack
  6. Type-C charging port
  7. Microphon
  8. ANC switch

Power on/off

  • Power on: Press and hold for about 1 second until the red and blue indicator blinks alternately,it will be pairing status;
  • Power off: Press and hold for about 3 seconds,the red indicator will be on for around 1 second and goes off.

Paring

  • Turn on the Bluetooth switch of the mobile phone or other devices(such as PC, Tablet etc), and enter into the Bluetooth list , search for the pairing name “JH-ANC9188”;
  • When seeing the pairing name ANC918 ” on the list,click it to connect the headset with your device once paired successfully.the blue indicator blinks every 6 seconds.Hong-Kong-Juyan-Technology-ANC918-Active-Noise-Cancelling-Bluetooth-Over-Ear-Headphone-FIG-7

Music play

  • Volume up: Click the”+” button to increase volume
  • Volume down: Click the button to decrease volume
  • Next song: Press and hold the”+” button around 2 second
  • Previous song: Press and hold the”-” button around 2 second
  • Music play/pause: Click the button

Calling (Mobile)

  • Answer call: Click the button when call is coming
  • End call: Click the button when call is over
  • Cancel call: Click the button when calling
  • Reject call: Press and hold the button around 2 seconds when call is coming
  • Redial: Double click the button to redial last call number

Reset

  • Press and hold the “+” and”-” button at the same time around 2 seconds until the red and blue indicator flash alternately.

Siri or google assistant

  • In standby mode or music mode, triple-click the button

ANC on/off

  • Turn on: When the ANC function is off, turn the ANC switch on then the ANC indicator will be on.
  • Turn off: When the ANC function is enabled, turn the ANC Switch off then the ANC indicator will be off.

Bluetooth indicator instruction

  • Connect successfully: The blue indicator blinks every 6 seconds
  • Pairing status: The red and blue indicator blink alternately
  • Reset: The red and blue indicator blink alternately
  • Listen to music: The blue indicator blinks every 6 seconds
  • Charge fully: The indicator will be off
  • ANC on: The indicator will be solid green
  • Power of: The red indicator will be on around 1 second then goes off
  • Charging; The indicator will be solid red

AUX mode

  • Connect one end of the 3.5mm audio cable into the audio jack of the headset;
  • Connect the other end into your mobile or other device,then can play music
  • Note: The headphone will be powered off once plug the 3.5mm audio cable into audio jack(When headphone is power on),the 3.5mm audio cable must be taken out from the headphone if need to turn on the headphone.

Charging instruction

  • Before using,please check and assure the battery is enough.
  • While the headphone is in low battery, please use Type-C charging cable to charge and the charging indicator will be red when charging. Once it’ s fully charged, the indicator will be off.
  • The headphone will be turned off automatically when charging, it will take about 2 hours to charge fully.

Technical parameters

  • Model name; ANC918
  • Working distance: 10m
  • Frequency response: 2402-248OMHz
  • Charging time: About 3H
  • Charging port: Type-C
  • Speaker driver unit: 40mm,320

FAQ

  1. The headphone can’ t be turned on
    Please ensure the battery is enough.

  2. Pairing failure
    Please ensure the headphone is in powered-on and pairing status, and the mobile or other device locates within 1 m range; And then redo again.

  3. Connect automatically
    The headphone will automatically connect the mobile or other devices which used last time

  4. Sound cut off/stuck
    Check whether the mobile or other devices locates valid range (10m) and whether there are obstacles between the headphone and the mobile.

  5. Charging way
    Please ensure the charging adaptor is DC 5V/1A,or Car charger or powerbank to charge the headphones.

Like Sun GmbH

Company name: KOVA ASSOCIATES LTD

  • Address: 72a Kingston Road, Portsmouth, Hampshire, PO2 7PA, United Kingdom
  • Contact Person: Louisa Timms tel +44 7312658771
  • Email: KOVA.Compliance@outlook.com

Manufacturer: SHENZHEN JIUHU TECHNOLOGY co,LIMITED Manufacturer Address: Floor 4th, Building E, Bafang Zhigu Industrial Park, Huanguan South Road, Guanlan Street, Longhua District, Shenzhen,China

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals