ICEQ1 Ice Maker Instruction Manual

ICEQ1 Ice Maker Instruction Manual

TECHNICAL REQUIREMENTS

1. Color box&paper card: material and size should be according to document requirements, the size of the finished product deviation within 2-3mm requirements;
2. Carton: material and size should be according to document requirements,the size of the finished product deviation within plus 5-10mm requirements;
3. PE foam: the bonding place of PE foam should be smooth, the glue should be even, the size of the finished product deviation within 2-3mm requirements;
4. Manual, warranty card, label, album and other printing materials must meet the inspection requirements of the quality department;

*Details of all packaging materials can be compared with: Inspection guide for incoming materials of packaging cartons – document No. : YWT-ZY-PZ-26

1. The printed contents, patterns and fonts shall meet the requirements of drawings or sealed samples, and the patterns shall be clear, full, no decolorization and obvious overflow edge; and the position shall be accurate , horizontal deflection is not allowed to exceed 5mm, pattern shall be consistent color, good ink adhesion, and not decolorizing with fingers ;
2. Packing materials must have protective measures and are not allowed to damage their outer surface due to packaging and transportation.

IMPORTANT NOTICE

Warning:

1. The refrigerant of this product is Pay attention to the fire source and keep the indoor ventilated during the maintenance. Please do not use combustible items near the machine to avoid fire.
2. There should be no obstacles around the machine to keep ventilation unobstructed.
3. Except for the method recommended by the manufacturer, no machinery or other methods may be used to accelerate the defrosting process.
4. Do not damage the refrigeration circuit of the
5. It is recommended to use only bottled, filtered, or tap water that is suitable for Do not use any other type of liquid, such as fruit juice. Do not use water that has remained in the appliance for a period of time, it is recommended to always use fresh water at each time.
6. Keep the machine away from fire, and it is recommended to ask professionals to dispose of it when it is discarded.
7. Forbid store explosives in appliances, such as combustion-supporting sprays.
8. Add Drinkable water only.
9. The refrigeration system contains a high-pressure Do not damage the Refrigeration system. The maintenance of the Refrigeration system shall be done by professionals.
10. If the power cord is damaged, to avoid danger, it must be replaced by the maintenance department of the manufacturer or a similar department’s professional staff.

This product is used for household, commercial or similar purposes: Kitchen, restaurants , stores, offices , hotel . farm, and so on.

SAFETY TIP

The most important thing is yours and others safety, We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol:

  DANGER
WARNING

All safety messages will follow the safety alert symbol and the word “DANGER” and “WARNING”. You can be seriously injured if you don’t follow safety instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Never touch the evaporator surface by hand when the ice maker is working. It may cause frostbite to your skin.

When using household appliances, you must follow basic safety rules to reduce the risk of fire, shock and damage to people or objects.Please read the following safety tips carefully before using the appliance.

1. Do not use the machine when the power cord is damaged.
2. Use the correct power socket and make sure the plug is fully inserted into the socket.
3. When using, please do not put the power cord on the carpet or the heat insulation Do not cover the cord.Keep cord away from walking channel, and do not submerge in water.
4. We do not recommend the use of an extension cord, as it may overheat and become a risk of fire.
5. Unplug the ice maker before cleaning or making any repairs or servicing.
6. Children must use it under the supervision of adults.
7. Do not clean the ice maker with flammable liquids, which may cause a fire or explosion.
8. Please do not turn over the ice If there is a overturn, place the machine forward for 2 hours before turn on it.
9. If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to room temperature before powering up.

PRODUCT OVERVIEW

Control Panel

• ————- Power

• ————- Ice Selection Key

• Turn on key: touch on/off power indicator light

• Ice selection key: touch select small ice/Iarge ice in turn

• Water full indicator: water full corresponding indicator light on

• Water shortage indicator: water shortage corresponding indicator light on.

USING INSTRUCTIONS

1. Remove all internal and external packaging and check for ice baskets and If any attachments are missing, please contact the customer service department.

2. Remove the ice basket and scrub in warm water, then wash the tank with warm water and a soft cloth.

3. Place the ice maker out of direct sunlight and away from heat and Place the ice maker horizontally and ensure that there is at least 15cm of space between the sides and the back.

4. The ice maker is placed in a suitable socket to power on.

5. Open the top cover and put in the ice basket (as shown below).
   

6. Press the I’_0 button to select the ice size . If the room temperature is below 15 C , to prevent ice linking, it is recommended that you choose small ice.

7. Open the top cover, take out the ice basket, add water to the water tank, keep the water level below the highest mark, put the ice basket back and close the top cover.

8. Press they power key on the control panel to start making ice. The initial water should be more than 1lL

9. The duration of each ice-making cycle depends on the size of the selected ice cubes and room temperature. The size of the ice cubes is related to water temperature and ambient temperature.

10. After the ice making machine is started, the water level in the water tank should be checked If the pump can not get out of the water, the ice maker will stop automatically, and the “water shortage” indicator light is on to indicate the water shortage. At this time,the water tank should be filled up, and then press the button to restart the ice making.

11. If the ice basket is full, the making of ice stops automatically..

12. It is recommended to change water every 24 hours to keep the water If the ice maker is not used for a long time, drain the remaining water from the tank.
    Advice : Use water that is drinkable.

CLEANING AND MAINTENANCE

Before/after using your ice maker, It is recommended that you clean the whole machine thoroughly.

1. Open the top cover and take out the ice basket, pull the silicone handle of the control panel to open and flush directly with water (as shown below);
2. Open the drain plug and drain the water in the tank;
3. Rub the inner tank with diluted detergent, warm water and a soft cloth;
4. The outside of the ice maker should be regularly scrubbed with diluted detergent and warm water;
5. Dry the inner tank with another soft cloth ;
6. Close the drain When the machine is not in use for a long time, open drain plug to drain water completely from water tank.
   

TROUBLESHOOTING

Add water to remake ice Clean
Ice making cycle is normal but no ice is made.| Ambient temperature or water temperature is too high, refrigeration system leakage or refrigeration system blockage| Contact purchasing store or manufacturer’s after-sales service center

Notice: If there is a failure outside the list, please consult the purchase store or contact the manufacturer’s after-sales service center for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>