Morecam J1 Wireless Video Doorbell Camera User Guide
- June 2, 2024
- Morecam
Table of Contents
Morecam J1 Wireless Video Doorbell Camera
MEET THE DOORBELL
Doorbell comes with a 4,500mAh rechargeable Li-ion battery.
MEET THE CHIME
Please mind the battery polarities while installing the batteries.
CHARGE YOUR DOORBELL
Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED.
COMPATIBLE CHARGER (not provided)
USB compatible mobile phone charger (DC 5V=1A~2A).
APP DOWNLOAD
Search ‘Cloud Edge’ in the App stores or scan below QR codes to download the App.
SET UP DOORBELL
Switch on power for your doorbell, and you will see the LED indicator flashes red (once per second). Start setting up your doorbell following the in-app instructions.
Tips
- Please operate the setup near your Wi-Fi router.
- Make sure your phone is connecting to a 2.4GHz Wi-Fi.
- Make sure the doorbell is turned on, and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.
- Ensure the Wi-Fi signal is good, and the Wi-Fi password is correct.
PAIR WITH YOUR INDOOR CHIME
-
Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.
-
Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing.
Chime pairing succeeds. -
CHIME SETTINGS
Ringtone selection
Click to change ringtone (4 ringtones available).
Volume control button
Click to control volume:
level 1: 110 dB; level 2: 100 Db
level 3: 90 dB; level 4: 80 dB
Settings
Click to enter/quit pairing mode; Press & hold for 5 seconds to restore factory defaults.
INSTALL YOUR DOORBELL
Select location for your doorbell.
(OPTIONAL) Install at an angle.
You can purchase the following angled brackets so as to point your doorbell to a specific view angle.
Standard installation
TAMPER ALARM
Anti-theft Tamper Alarm. You can also enable the anti-theft alarm in doorbell settings.
Tamper Alarm On
With tamper alarm on, your doorbell detects disassembly by the trigger on its back, and then a 30-second siren alarm will be triggered. Meantime, video recording get started, and alarm notification will be pushed to the owner’s APP account.
Tamper Alarm Off
You can disable the tamper alarm in doorbell settings, and detach the doorbell without any alarm for battery recharge or regular maintenance.
TROUBLESHOOTING
Is the video doorbell powered by battery?
Yes, there is a Li-ion battery built-in. Thanks to the low power consumption technology, a full charge lasts for more than 2-3 months in our lab test environment. (Lab test condition: 10 events per day, 15 seconds video recording per event)
Does it support legacy hardwire power source?
No, it doesn’t. If you need longer battery endurance, suggest that adding a solar battery charger for your doorbell, if only there is sunshine in your doorbell location. You can contact our after-sale service to know where to buy.
Does it work with existing mechanical chime?
No. The doorbell comes with a battery powered wireless chime to notify people when your visitor presses the doorbell button. If you have an existing indoor chime, please use the provided jumper to bypass the existing chime, so as to provide sufficient power to the new video doorbell. And our wireless chime is 100% wireless, you can place it almost everywhere you like. The transmission distance in open space is more than 100 meters (328 feet).
How many wireless chimes can be added to the doorbell?
You can add as many wireless chimes as your wish on one video doorbell.
Does it support customized Motion Detection Zones?
Yes, it does. You can customize the detection zone in the doorbell settings.
Does the doorbell support cloud storage?
Your doorbell support local video storage by TF card. And you can also activate the cloud storage service in the App. There is a 7-day-free cloud recording trial service.
FAQs
Do Morecam J1 doorbell cameras record all the time?****
Most doorbell cameras do not continuously record. They only record when the camera is activated. To ensure you don’t miss the footage, they then send a notification to your phone. A few cameras actually record continuously.
How long do Morecam J1 wireless doorbell cameras last?****
The official rating for Ring Doorbell batteries from a full charge is somewhere between six and twelve months (ratings vary based on models) before needing to be recharged. Better scores are typically found in newer models, like 10 to 12 month models.
Do Morecam J1 wireless doorbells need internet?****
Internet access is not always necessary to use a doorbell camera. There are a few options to using a smart doorbell if you don’t have access to a remote live broadcast or other services that depend on a WiFi network.
How does a Morecam J1 wireless video doorbell work?****
Similar to security cameras, video doorbells record audio using a speaker and microphone and video using infrared LED sensors or a spotlight during the day or at night. Either a built-in micro-SD card or a cloud server are used to store the video locally.
How far can Morecam J1 doorbell cameras hear?****
When we first tested the Ring Video Doorbell 3 Plus in one of our labs, we discovered that the maximum distance at which we could comprehend audio recorded at a conversational volume was 18 feet.
Can a Morecam J1 wireless doorbell be hacked?****
Ring doorbell security vulnerabilities are still prevalent, particularly given that they are not encrypted, even if some have been addressed and subsequently fixed. Can Ring devices therefore be hacked? They can, yes.
How far can a Morecam J1 wireless doorbell work?****
When someone rings the doorbell, wireless doorbells with receivers transmit a signal to the receiver. The maximum distance between the doorbell and receiver is specified by the manufacturer in metres. This usually ranges from 50 to 100 metres. The maximum distance is actually lesser.
How does Morecam J1 wireless doorbell work without battery?****
The doorbell is just a little alternator. Piezoelectricity employs the mechanical force produced by pressing down on the button as a micro-power source to generate a low-power signal. The doorbell can potentially ring loudly enough to withstand regular use.
Do Morecam J1 wireless doorbell works through walls?****
The basic rule of thumb is that a signal will be 20% weaker after passing through each wall.
Can I use Morecam J1 doorbell camera without service?****
There are many excellent video doorbells available without memberships. These doorbells store video locally, typically on a microSD card or their internal memory, as opposed to keeping it on the cloud. You no longer have to pay a monthly subscription, and you have more control over your recordings as a result.
What activates a Morecam J1 doorbell camera?****
When the doorbell is pressed, the camera starts recording. The doorbell will ring if you are home. If not, the camera sends a signal to a desktop or mobile app that identifies the person at the door.
Do Morecam J1 doorbell cameras have night vision?****
The Doorbell Camera can see at night using infrared technology.
What should I look for in a Morecam J1 wireless doorbell?****
You should choose a wireless bell that can function on a variety of frequencies because radio waves are used by wireless bells to transmit the signal. This will guarantee that neither your neighbor’s garage door opener nor their wireless doorbell will cause your doorbell to ring.
Can Morecam J1 wireless doorbells go off by themselves?****
A doorbell can ring on its own, whether it is wired or wireless. Due to electrical shorts, wired doorbells frequently ring on their own. Due to signal frequency interference or sensor contact, wireless doorbells may ring on their own.
Do Morecam J1 doorbell cameras record all the time?****
Most doorbell cameras do not continuously record. They only record when the camera is activated. To ensure you don’t miss the footage, they then send a notification to your phone. A few cameras actually record continuously.