DUTCH ORIGINALS ELECTRONICS DO-CH-ACL055RT 5.5L Mobile Air Cooler User Manual

: June 3, 2024
: DUTCH ORIGINALS ELECTRONICS

Table of Contents

PARTS & FEATURES
SAFETY INSTRUCTIONS
INSTALLING AND USING THE DEVICE
CLEANING AND MAINTENANCE
SPECIFICATIONS
STORAGE & TRANSPORTATION
INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT
EC Declaration Of Conformity
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DUTCH ORIGINALS ELECTRONICS DO-CH-ACL055RT 5.5L Mobile Air Cooler User Manual

PARTS & FEATURES

Device

Product images may be subject to change without prior notice.

Control panel
Short louvers
Long louvers
Castors
Ice box / packs
Honeycomb filter
Air filter
Water tank
Water level indicator
Drain plug

SAFETY INSTRUCTIONS

Always take the following basic precautions before using the Portable air cooler 5.5L (hereinafter referred to as ‘device’)

Read the user manual carefully before operation.

General information

Carefully read the instructions for use and store them in a safe location. If you give this device to other people, please also pass on this manual.
Only use this device in accordance with instructions in this user manual.
Do not place the device under any mechanical stress.
Please handle the device carefully. Jolts, impacts or falls, even from a low height, can damage the device.
Prior to use, check the device for visible external damage. Never operate the device if it is damaged.
The guarantee will expire immediately if damage has been caused by non compliance with this user manual. The manufacturer accepts no liability for damage caused by noncompliance with the user manual, negligent use or use which does not comply with the conditions of this user manual.
Keep the device out of the reach of children and pets.
Keep the device out of the reach of children as this device is not a toy and should be kept under strict supervision to prevent children from using the device as a toy.
Keep the device out of the reach of children below the age of 8 years.
Keep children under strict supervision to prevent them from using the device as a toy.
This device can be used by children older than 8 years and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, but only if they are supervised and have been instructed to use the device in a safe manner and understand the hazards involved.
Do not allow unsupervised children to clean or maintain this device.
Always empty the water tank
- before you move the device;
- before you store the device;
- before you clean or maintain the device;
- after you have used the device.
Always remove the device from the power socket:
- before you move the device;
- before you store the device;
- before you clean or maintain the device;
- after you have used the device.
Repairs must only be carried out by a qualified technician. Never attempt to repair the device yourself. Improper repairs can pose significant risks to the user and will invalidate any warranty claims.
Only allow repairs to be carried out by a qualified service centre. Qualified service centre: after-sales department of the manufacturer or store, which is recognised and authorised to carry out such repairs so potential hazards can be prevented. If problems are encountered with the device, please return it to this department.
The A-weighted sound pressure level is below 62 dB.
This device is intended for domestic or similar use, not for professional use.
Do not tilt over the device.
Keep the air inlets and outlets clear from any obstructions.
Do not put any foreign obstacles in the device.
Do not put any objects or fingers in the air inlets or outlet of the device.
Do not sit or climb on the device.
Do not put or install any objects on the device.
Do not use or store the device in an environment subject to strong static electricity or magnetic fields.
WARNING! Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!
The guarantee will expire immediately if damage has been caused by non compliance with this user manual. The manufacturer accepts no liability for damage caused by noncompliance with the user manual, negligent use or use which does not comply with the conditions of this user manual.

Electricity, batteries and heat

Prior to use, check that the mains voltage is the same as the mains voltage stated on the name plate of the device.
WARNING! Do not plug anything else into the same electricity circuit or power wall socket. If unsure your home meets this specification, consult a certified electrician prior to the use of this device. Risk of fire, overheating, malfunction, property damage, injury or even death may result from not adhering to this instruction!
Do not use the device outdoors. Exposure to outdoor elements such as rain, snow, sun, wind, or extreme temperatures may cause the device to become a safety hazard.
WARNING! DO NOT COVER: Do not allow foreign objects to enter or block any ventilation, air inlet or air outlet, openings and never cover the device with cloths or curtains or any other material, as this may cause electric shock, overheating, fire or damage to the device.
Make sure your hands are dry before touching the device or power plug.
Do not use the device if it has a damaged power plug, or if it has become faulty, has fallen or become damaged in any way. Deliver the device to the manufacturer or the closest qualified service centre for inspection or repair.
Only connect the device to an easily accessible power socket, so you can quickly pull the plug out of the power socket in case of emergency.
The device must only be powered by connecting the plug to the power socket.
Do not use any extension cables or socket strips to power the device.
When plugging in the power plug, make sure people cannot accidentally pull it out or trip over it.
Make sure the power cord cannot be trodden on or pinched.
When removing the plug from the power socket, pull the plug itself, not the cable.
Do not remove the plug from the power socket, when device is powered on
Do not allow the power cord to hang over sharp edges and keep it away from hot objects and naked flames.
Do not move or store the device until it has cooled down.
Switch OFF the device and disconnect it from the power socket in case you discover any faults during use, find any signs of damage, or if it is not in use or is being cleaned.
Do not crush, puncture or dismantle the device; this might damage the device.
Disconnect the device from the power socket during lightning storms or if it will not be used for long periods of time.
Do not operate the device using an external time switch or a separate remote control system.
Before cleaning the device, always disconnect it from the power socket.
Do not open the casing as this may result in electric shock.
Never immerse the device in water or any other liquid, to avoid the risk of electric shocks. Do not touch the device if it has fallen into water. Disconnect the device from the power socket with the device switched OFF and do not use it again.
Ensure that the device does not come into contact with heat sources, such as a hot hob or naked flame.
WARNING! To reduce the risk of fire or electric shock, protect the device from dripping or splashing water, and keep it away from objects filled with liquids such as vases.
Such objects should not be placed on or near the device.
The battery of the remote control can be replaced.
Do not place the remote control close to products that become hot.
If the battery leaks, do not allow any battery fluid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Keep batteries out of reach of children.
Do not short circuit the contacts inside the battery compartment or any batteries.
Do not crush, puncture, dismantle the device, otherwise the batteries might get damaged.
Do not dispose the remote control in a fire because the battery could explode.
Do not expose the device, remote control and batteries to excessive heat sources like fire.
Do not dispose the device remote control in your household waste, as it contains batteries. Batteries can be disposed of by taking them to your local recycling station. Contact your local government offices for details.

Important information, always follow these instructions for safety

This device can be used by children aged 8 and over and people with restricted physical, sensory or mental capacity or a lack of experience and expertise, provided they are under supervision or have been given instructions on the safe use of the device and are aware of the potential hazards. Children must not play with the device. Cleaning and maintenance must not be done by children unless they are over the age of 8 and under supervision.
Only use the device indoors, in dry areas and not in the vicinity of water or any other liquids.
WARNING! This device is NOT intended to be used in bathrooms, laundry areas and similar humid indoor locations.
Never immerse the device in water or any other liquid. This can cause a fatal electric shock!
Switch OFF the device and disconnect it from the power socket when the device is not in use or is being cleaned.
Check the device regularly for damage.
Never use the device if the power plug shows signs of damage, if the device has fallen to the ground or has any other signs of damage. In such cases, take the device to an expert for inspection and have it repaired if necessary.
Never allow children to use the device without supervision. Children are unable to judge the hazards associated with incorrectly using electric devices.
Children in the vicinity of the device must always be supervised by an adult.
Never leave the device unattended whilst it is in use.
Keep the device air inlets clean so they cannot become blocked with dust or other particles, thus preventing overheating and malfunction.

INSTALLING AND USING THE DEVICE

First use
Open the packaging carefully before taking out the device. Make sure the device is complete and undamaged. If any components are missing or damaged, contact the vendor and do not use the product. Retain the packaging or recycle it in accordance with local regulations.

Remove all packaging from the device.
Clean the device with a damp cloth. Please refer to the ‘cleaning and maintenance’ section.
Continue with the procedure in the ‘using the device’ section.

Using the device
Place the device on a firm and solid surface, in an area with at least 50 cm of free space around the device, generating a proper air circulation.
Do not operate the device close to walls, curtains or other objects that might block the air inlets and air outlet, resulting in a bad air circulation.

Control panel

Power ON/OFF button
Timer button
Swing mode button
FAN Speed button (low-medium-high)
Cool button
Fan button (normal-natural-sleep)

Remote control

The remote control has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote control battery.

Inserting / replacing the remote control battery:

Push the security lock.
Pull out the battery tray and remove the old battery.
Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated.
Place battery tray back in the slot.

REMOTE CONTROL

A. Power ON/OFF
B. FAN speed
C. Cool mode
D. Swing mode
E. Timer
F. Fan selection

Modes
Power ON/OFF

Connect the device to an easily accessible power socket. When connected, the Power LED indicator 1 on the control panel lights up and a beep will sound.
Press the power ON/OFF button on the device 1 or remote control A to switch on the device.
When the device is powered on, it start at medium FAN speed, after 3 seconds it will change to low speed.

When switching on the device it will automatically start in Normal mode.
To switch off the device, press the power ON/OFF button on the device 1 or remote control (A) again, until the Power LED indicator 1 on the control panel switches off.

FAN mode
You can ventilate your room. In this mode the air is circulated, creating a ‘breeze feeling’, but the room will not be cooled.
Press the FAN button on the device 6 or remote control F until the FAN – Normal LED indicator on the control panel lights up.

You can select the required FAN speed as described in “FAN speed”

FAN speed
When the device is powered on, it will start automatically at medium speed, after 3 seconds it will automatically switch to low speed.
Repeatedly press the fan SPEED button on the device 4 or remote control B until the required FAN speed has been selected. There are 3 selectable FAN speeds; low, medium & high speed.

While pressing the required FAN speed, the SPEED LED display 4 will indicate the selected speed.

Note! This function is only available in NORMAL air flow mode.

Swing mode

To control the horizontal direction (up/down) of the airflow, adjust the louver in the air outlet 2 by hand.
To control the vertical (left/right) direction of the airflow, press the SWING button on the device 3 or remote control D.

FAN airflow
The device has 3 selectable mode functions: normal – natural – sleep. Press the mode button on the device 6 or remote control F to select the desired mode.

Normal = regular fixed FAN speed (speed is selectable: low – medium – high)
Natural wind = varying FAN speeds, giving a natural wind breeze with some high-speed breezes. (FAN speed is not selectable)
Sleeping wind = varying FAN speeds, giving a natural wind breeze between low and medium speed. (FAN speed is not selectable)

Cooling mode
Press the Cool button on the device 5 or remote control C until the Cool LED indicator on the control panel lights up.

Filling the water tank:

Switch off the device and disconnect it from the mains electricity supply.
Add clean fresh water, max 5.5L water
Respect the MIN & MAX water levels. There is an indicator at the front of the device 9 & in the water tank itself.
Place the frozen ice packs 5 for extended cooling performance.
Slide the water tank back in the device and secure it by turning the lock clockwise so it cannot be opened.
Do not move the device while operating, to avoid water spilling.

Note!

DO NOT OPERATE THE COOLING MODE WITHOUT WATER IN THE WATER TANK
ONLY USE CLEAN FRESH WATER, AND DO NOT ADDANY ADDITIVES!

Empty the water tank:

Switch off the device and disconnect it from the mains electricity supply
Open the water tank by turning the lock counter clockwise and pull out the reservoir.
Remove the plug 10 on the right bottom to drain the water from the tank
When the tank is empty, properly place back the plug 10.
Slide de water tank back in the device and secure it by turning the lock clockwise.

When using the device in COOL mode, the water tank needs to be filled with cold water. To achieve a longer cooling function, fill the ice packs with water and freeze them before use.
Timer setting
The timer settings can be set from 0.5 to 7.5 hours.
Press the TIMER button on the device 2 or remote control E to select the desired timer setting.
Each press will add 0.5 hour to the timer setting and the corresponding LEDs will light up. The timer sequence: 0.5 – 1 – 1.5 – 2 – 2.5 – 3 – 3.5 – 4 – 4.5 – 5 – 5.5 – 6 – 6.5 – 7 – 7.5 – OFF

Cancelling the set timer
Press the TIMER button on the device 2 or remote control E until all the timer LEDs are switched off

CLEANING AND MAINTENANCE

Warning

Before cleaning the device, always switch it OFF, disconnect it from the mains electricity supply.

Cleaning the air filters
It is recommended to clean the air filter monthly when using the device. Dust collets on the filters and restricts the airflow and reduces the efficiency and could even cause damage to the device. The device has 1 air filter at the rear. The air filter requires regular cleaning and is removable for easy cleaning.
Warning! Do not operate the device without air filters in place! It might contaminatethe evaporator.

It is recommended to clean the filter by wiping it with a damp cloth.

In case the filter needs more extensive cleaning, remove it from the device.

Switch off the device
Remove the plug from the power socket.
Remove the 2 screws at the top of the filter.
Remove the filter from the device.
Use a clean rag to absorb the surface dust on the filter mash. If the filter is extremely dirty, use tap water to rinse the filter.
Fully dry the filter mesh before placing it back in the device.

Cleaning the device

Never use aggressive or abrasive cleaning materials, cleaning alcohol or sharp objects like hard brushes or knives.
Clean the exterior of the casing with a damp cloth.
Then dry the exterior with a dry cloth.

Note:
The device CANNOT be immersed in water.

SPECIFICATIONS

Voltage input: 220 – 240 Vac – 50/60 Hz
Power consumption: 65W
Class: II
Capacity: 5.5L
Air velocity: 8-9 m/s
Oscillation degree: 60°
Sound level: ≤ 62 dB(A)
Dimensions: 75 x 33 x 30 cm (H x D x W)
Weight: 5.7 Kg

STORAGE & TRANSPORTATION

When storing the device, it should first be cleaned in accordance with this user manual.

Drain the remaining water.
The evaporation in the device needs to be well dried out.
The device should be stored in its original packaging in an upright position.
Always store the device in a dry and well-ventilated room and beyond the reach of children.
Protect the device against vibrations and shocks during transport.

All contents and specifications mentioned in this manual are subject to change without prior notice.

INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT

( WEEE , the waste electrical and electronic equipment directive)

Your product has been manufactured using high quality materials and components which can be recycled and used again. At the end of its service life, this product cannot be disposed of in normal domestic waste, but must be taken to a special collection point for recycling electrical and electronic equipment. This is indicated in the user manual and in the packaging by the waste container marked with a cross symbol. Used raw materials are suitable for recycling.

By recycling used appliances or raw materials, you are playing an important role in protecting our environment. You can ask your local council about the location of your nearest collection point.

EC Declaration Of Conformity

We,
Mascot Online BV
Veluwezoom 32
1327 AH Almere
The Netherlands

Declare under our sole responsibility that the product:

Product Brand: Dutch Originals
Product Model No: DO-CH-ACL055RT
Product Description: Mobile air cooler 5.5L + remote control
Product Rating: 220 – 240 Vac, 50/60 Hz, Class II, 65W

Following the provisions of the Directives:

Electromagnetic Compatibility (EMC): 2014/30/EU
Energy Related products (ERP): 2009/125/EC, amending (EU) 2016/2282
Low Voltage Directive (LVD): 2014/35/EU
Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive: 2011/65/EU, with its amendment 2015/863/EU

And standards to which Conformity is declared:

EMC:

EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013

ERP:

Commission Regulation (EU) No. 206/2012 of 6 March 2012 and Amending Commission Regulation (EU) 2016/2282 implementing Directive 2009/125/ EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners and comfort fans

LVD: