AEG IKE95771FB Induction Hob User Manual

USER MANUAL IKE95771FB

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of  incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and  knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children of less  than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
• Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging away from children and dispose of it appropriately.
• WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down.
• If the appliance has a child safety device, it should be activated.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.

1.2 General Safety

• This appliance is for cooking purposes only.
• This appliance is designed for single household domestic use in an indoor environment.
• This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not  exceed (average) domestic usage levels.
• WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
• WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
• Never use water to extinguish the cooking fire. Switch off the appliance and cover flames with e.g. a fire blanket or lid.
• WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
• CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
• WARNING: Danger of fire: Do not store items on the cooking surfaces.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
• Do not use the appliance before installing it in the built-in structure.
• Do not use a steam cleaner to clean the appliance.
• After use, switch off the hob element by its control and do not rely on the pan detector.
• If the glass ceramic surface / glass surface is cracked, switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre.
• If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard.
• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as
  suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS
2.1 Installationc
WARNING!
Only a qualified person must install this appliance.
WARNING!
Risk of injury or damage to the appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with the appliance.

• Keep the minimum distance from other appliances and units.

• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to prevent moisture from causing swelling.

• Protect the bottom of the appliance from steam and moisture.

• Do not install the appliance next to a door or under a window. This prevents hot cookware from falling from the appliance when the door or the window is opened.

• Each appliance has cooling fans on the bottom.

• If the appliance is installed above a drawer:
  – Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system.
  – Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer.

• Remove any separator panels installed in the cabinet below the appliance.

2.2 Electrical Connection
WARNING!
Risk of fire and electric shock.

• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make sure that the appliance is disconnected from the power supply.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure that a shock protection is installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to a socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

2.3 Use
WARNING!
Risk of injury, burns and electric shock.

• Do not change the specification of this appliance.
• Remove all the packaging, labelling and protective film (if applicable) before first use.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Set the cooking zone to “off” after each use.
• Do not put cutlery or saucepan lids on the cooking zones. They can become hot.
• Do not operate the appliance with wet hands or when it has contact with water.
• Do not use the appliance as a work surface or as a storage surface.
• If the surface of the appliance is cracked, disconnect immediately the appliance  from the power supply. This to prevent anelectrical shock.
• Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation.
• When you place food into hot oil, it may splash.

WARNING!
Risk of fire and explosion

• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
• The vapours that very hot oil releases can cause spontaneous combustion.
• Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

WARNING!
Risk of damage to the appliance.

• Do not keep hot cookware on the control panel.
• Do not put a hot pan cover on the glass surface of the hob.
• Do not let cookware boil dry.
• Be careful not to let objects or cookware fall on the appliance. The surface can be  damaged.
• Do not activate the cooking zones with empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface.

2.4 Care and cleaning

• Clean the appliance regularly to prevent the deterioration of the surface material.
• Switch off the appliance and let it cool down before cleaning.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

2.5 Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
•  Concerning the lamp(s) inside this product and spare part lamps sold separately:
  These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

2.6 Disposal
WARNING!
Risk of injury or suffocation.

• Contact your municipal authority for information on how to dispose of the appliance.
• Disconnect the appliance from the mains supply.
• Cut off the mains electrical cable close to the appliance and dispose of it.

INSTALLATION

WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob. Serial number ………………………

3.2 Built-in hobs
Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.
3.3 Connection cable

• The hob is supplied with a connection cable.
• To replace the damaged mains cable, use the cable type: H05V2V2-F which withstands a temperature of 90 °C or higher. The single wire must have a diameter of minimum  1,5 mm². Speak to your local Service Centre. The connection cable may only be replaced by a qualified electrician.

WARNING!
All electrical connections must be made by a qualified electrician.
CAUTION!
Do not drill or solder the wire ends. It is forbidden.
CAUTION!
Do not connect the cable without cable end sleeve.

Two-phase connection

1. Remove the cable end sleeve from black and brown wires.
2. Remove an insulation of the brown and black cable ends.
3. Apply a new wire end sleeve of 1.5 mm² on common cable end (special tool required).
   Cable cross section 1,5 mm²

One-phase connection – 220 – 240 V~| Two-phase connection – 400 V 2 ~ N
---|---
| Green – yellow| Green – yellow|
N| Blue and blue| Blue and blue|

N

L| Black and brown| Black|

L1

| | Brown|

L2

3.4 Assembly
If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances.

If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.

Find the video tutorial “How to install your AEG Induction Hob – Worktop installation” by typing out the full name indicated in the graphic below.

You Tube
www.youtube.com/electrolux
www.youtube.com/aeg
How to install your AEG
Induction Hob – Worktop installation

PRODUCT DESCRIPTION

4.1 Cooking surface layout

1. Induction cooking zone
2. Control panel
3. Flexible induction cooking area consisting of four sections

4.2 Control panel layout

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.

| Sensor field| Function| Description
---|---|---|---
1| | On / Off| To activate and deactivate the appliance.
2| | Timer| To set the function.
3| /| –| To increase or decrease the time.
4| —| Timer display| To show the time in minutes.
5| | PowerSlide| To activate and deactivate the function.
6| | FlexiBridge (Flexible Bridge)| To switch between three modes of the function.
7| | Pause| To activate and deactivate the function.
8| | Lock / Child Safety Device| To lock / unlock the control panel.
9| | Bridge| To activate and deactivate the function.
10| | Hob²Hood| To activate and deactivate the manual mode of the function.
11| P| PowerBoost| To activate the function.
12| –| Control bar| To set a heat setting.

4.3 Display indicators

warm / resid‐
ual heat.

BEFORE FIRST USE

WARNING!
Refer to Safety chapters.
5.1 Power limitation
Power limitation defines how much power is used by the hob in total, within the limits of the house installation fuses.
The hob is set to its highest possible power level by default.
To decrease or increase the power level:

1. Enter Menu > User settings.
   Refer to “Menu structure”.

2. Press on the front timer until appears.

3. Press / on the front timer to set the power level.
   Power levels
   Refer to “Technical data” chapter.

CAUTION!
Make sure that the selected power fits the house installation fuses.

• P72 — 7200 W
• P15 — 1500 W
• P20 — 2000 W
• P25 — 2500 W
• P30 — 3000 W
• P35 — 3500 W
• P40 — 4000 W
• P45 — 4500 W
• P50 — 5000 W
• P60 — 6000 W

DAILY USE

WARNING!
Refer to Safety chapters.

6.1 Activating and deactivating
Press and hold to activate or deactivate the hob.

6.2 Pot detection
This feature indicates the presence of cookware on the hob and deactivates the cooking zones if no cookware is detected during a cooking session.
If you put cookware on a cooking zone before you select a heat setting, the indicator above 0 on the control bar appears.
If you remove cookware from an activated cooking zone and set it aside temporarily, the indicators above the corresponding control bar will start blinking. If you do not place  the cookware back on the activated cooking zone within 60 seconds, the cooking zone will automatically deactivate.
To resume cooking, make sure to put the cookware back on the cooking zones within the indicated timeout.

6.3 Using the cooking zones
Place the cookware in the centre of the selected zone. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically.
You can cook with large cookware placed on two cooking zones at the same time. The cookware must cover the centres of both zones but not go beyond the area marking. If the cookware is located between the two centres, Bridge function will not be activated.

6.4 Heat setting

1. Press the desired heat setting on the control bar.
   The indicators above the control bar appear up to the selected heat setting level.

2. To deactivate a cooking zone, press 0.

6.5 PowerBoost
This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time.  After this time the induction cooking zone automatically sets back to the highest heat setting.

Refer to “Technical data” chapter.
To activate the function for a cooking zone: touch.
To deactivate the function: change the heat setting.
6.6 OptiHeat Control (3 step Residual heat indicator)

WARNING!
As long as the indicator is on, there is a risk of burns from residual heat.

The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
The indicators  appear when a cooking zone is hot. They show the level of the residual heat for the cooking zones you are currently using.
The indicator may also appear:

• for the neighbouring cooking zones even if you are not using them,
• when hot cookware is placed on cold cooking zone,
• when the hob is deactivated but the cooking zone is still hot.
  The indicator disappears when the cooking zone has cooled down.

6.7 Timer
Count Down Timer
Use this function to specify how long a cooking zone should operate during a single cooking session.
Set the heat setting for the selected cooking zone and then set the function.
You cannot activate the function while the Hob²Hood function is running.

1. Press. appears on the timer display.
2. Press or to set the time (00-99 minutes).
3. Press to start the timer or wait 3 seconds. The timer begins to count down.

To change the time: select the cooking zone with and press or .
To deactivate the function: select the cooking zone with and press . The remaining time counts back to 00.
The timer finishes counting down, a signal sounds and 00 blinks. The cooking zone deactivates. Press any symbol to stop the signal and blinking.

Minute Minder
You can use this function when the hob is activated but the cooking zones do not operate. The heat setting shows 00.
You cannot activate the function while the Hob²Hood function is running.

1. Press .
2. Press or to set the time.
   The timer finishes counting down, a signal sounds and 00 blinks. Press any symbol to stop the signal and blinking.
   To deactivate the function: press and .
   The remaining time counts back to 00.

6.8 Power management
If multiple zones are active and the consumed power exceeds the limitation of the power supply, this function divides the available power between all cooking zones (connected to the same phase). The hob controls heat settings to protect the fuses of the house installation.

• Cooking zones are grouped according to the location and number of the phases in the hob. Each phase has a maximum electricity loading. If the hob reaches the limit of  maximum available power within one phase, the power of the cooking zones will be automatically reduced.
• The heat setting of the cooking zone selected first is always prioritised. The remaining power will be divided between the other cooking zones according to the order of selection.
• For cooking zones that have a reduced power, the control bar blinks and shows the maximum possible heat settings.
• Wait until the display stops flashing or reduce the heat setting of the cooking zone selected last. The cooking zones will continue operating with the reduced heat setting. Change the heat settings of the cooking zones manually, if necessary. Refer to the illustration for possible combinations in which power can be distributed among the cooking zones.

6.9 Menu structure
The table shows the basic menu structure.
User settings

To enter user settings: press and hold for 3 seconds. Then, press and hold ****. The settings appear on the timer of the left cooking zones.
Navigating the menu: the menu consists of the setting symbol and a value. The symbol appears on the rear timer and the value appears on the front timer. To navigate between the settings press on the front timer. To change the setting value press or on the front timer.
To exit the menu: press .

OffSound Control
You can activate / deactivate the sounds in the Menu > User settings.
Refer to “Menu structure”.
When the sounds are off you can still hear the sound when:

• you touch,
• the timer comes down,
• you press an inactive symbol.

ADDITIONAL FUNCTIONS

7.1 Automatic Switch Off
The function deactivates the hob automatically if:

• all of the cooking zones are deactivated,
• you do not set any heat setting or fan speed setting after the activation of the hob, you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). A signal sounds and the hob deactivates. Remove the object or clean the control panel.
• the appliance gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again.
• you do not deactivate a cooking zone or change the heat setting. After some time, the hob deactivates.
  The relation between the heat setting and the time after which the appliance deactivates:

7.2 Pause
This function sets all cooking zones that operate to the lowest heat setting.
When the function operates , and can be used. All other symbols on the control panels are locked.
The function does not stop the timer functions.

1. To activate the function: press .
   The heat setting is lowered to 1.

2. To deactivate the function: press.
   The previous heat setting comes on .

7.3 Lock
You can lock the control panel while the hob operates. It prevents an accidental change of the heat setting.
Set the heat setting first.

To activate the function: press .
To deactivate the function: press again .
The function deactivates as you deactivate the hob.

7.4 Child Safety Device
This function prevents an accidental operation of the hob.
To activate the function: press . Do not set any heat setting. Press and hold for 3 seconds, until the indicator above the symbol appears. Deactivate the hob with .
The function stays active when you deactivate the hob. The indicator above is on.

To deactivate the function: press . Do not set any heat setting. Press and hold for 3 seconds, until the indicator above the symbol disappears. Deactivate the hob with .
Cooking with the function activated: press , then press for 3 seconds, until the indicator above the symbol disappears. You can operate the hob. When you deactivate the hob with the function operates again.

7.5 Bridge
The function operates when the pot covers the centres of the two zones. For more information on the correct placement of cookware refer to “Using the cooking zones”.

This function connects two right side cooking zones and they operate as one.
First set the heat setting for one of the right side cooking zones.
To activate the function: touch . To set or change the heat setting touch one of the control sensors.
To deactivate the function: touch ****. The cooking zones operate independently.

7.6 Flexible induction cooking area
WARNING!
Refer to Safety chapters.
FlexiBridge function
The flexible induction cooking area consists of four sections. The sections can be combined into two cooking zones with different size, or into one large cooking area.
You choose the combination of the sections by choosing the mode applicable to the size of the cookware you want to use. There are three modes: Standard, Big Bridge, and  Max Bridge.

To set the heat setting use the two control bars on the left side.

Switching between the modes
To switch between the modes press . The heat setting levels will be kept.
In some models there are two flexible cooking areas, left and right. To operate the flexible cooking area on the right side, use the symbols and the control bars on the right side of the hob.

Diameter and position of the cookware
Choose the mode applicable to the size and the shape of the cookware. The cookware should cover the selected area as much as possible.
Place the cookware with the bottom diameter smaller than 160 mm centrally on a single section. You can use a roaster pan for the Big Bridge and the Max Bridge modes.

Place the cookware with the bottom diameter larger than 160 mm centrally between two sections.

FlexiBridge Standard mode
This mode is activated by default when you activate the function. It connects the sections into two separate cooking areas. You can set the heat setting for each area separately.
Use the two control bars on the left side.

Correct cookware position:

Incorrect cookware position:

FlexiBridge Big Bridge mode
To activate the mode press until you see the correct mode indicator . This mode connects the three rear sections into one cooking area. The front section is not connected  and operates as a separate cooking zone. You can set the heat setting for each area separately. Use the two control bars on the left side.

Correct cookware position:
Make sure to place the cookware on the three connected sections. If you use cookware smaller than two sections the control bar blinks and after 2 minutes the zone deactivates.

Incorrect cookware position:

FlexiBridge Max Bridge mode
To activate the mode press until you see the correct mode indicator . This mode connects all sections into one cooking area. To set the heat setting use any of the two control bars on the left side.

Correct cookware position:
Make sure to place the cookware on the four connected sections. If you use cookware smaller than three sections the control bar blinks and after 2 minutes the zone switches off.

Incorrect cookware position:

PowerSlide
This function allows you to adjust the temperature by moving the cookware to a different position on the induction cooking area.

• The function divides the induction cooking area into three areas with different heat settings. The hob detects the position of the cookware and adjusts the heat setting corresponding with the position.
• You can place the cookware in the front, middle or rear position. If you place the cookware in the front you get the highest heat setting. To decrease it, move the cookware to middle or rear position.
• When you activate the function for the first time you will get the following default heat settings: 9 for the front position, 6 for the middle position and 3 for the rear position.
• You can change the heat settings for each position separately. The hob will remember your heat settings next time you activate the function.
• The heat setting display of the left front control bar shows the heat setting for this function. To change the heat setting use the left front control bar only. The left rear control bar is deactivated while the function operates.
  In some models there are two flexible cooking areas, left and right. To operate PowerSlide on the right side, use the right front control bar.
  Use only one pot with a minimum bottom diameter of 160 mm when you operate the function.

1. Place the correct cookware on the left front side of the cooking area.

2. Press and hold to activate the hob. A signal sounds and indicators above and appear.

3. Press to activate the function.
   A signal sounds and an indicator above the symbol appears.

4. Move the cookware back and forth on the cooking area as needed.
   The heat setting level on the control bar adjusts automatically.

5. To change the default heat setting levels, move the cookware to the area you want to adjust first.

6. Press any of the available heat setting levels on the left front control bar.
   The updated heat setting levels will be remembered for the next time you use the function.

7. Repeat the procedure for the remaining cooking areas, if needed.

8. To deactivate the function, press . You can also press 0 on the left front control bar.
   A signal sounds and the indicator above the symbol disappears. The heat setting level changes to 0.
   You can set a timer while PowerSlide operates. In this case the timer does not deactivate the cooking zones when the set time runs out. The timer affects all three cooking areas activated by the function at the same time.

7.7 Hob²Hood
It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually.
For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to hood user manual.
Operating the function automatically
To operate the function automatically set the automatic mode to H1 – H6. The hob is originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes temperature of the cookware automatically and adjusts the speed of the fan.

Automatic modes

| Automat‐ ic light| Boiling1)| Frying2)
---|---|---|---
Mode H0| Off| Off| Off
Mode H1| On| Off| Off
Mode H2  3)| On| Fan speed 1| Fan speed 1
Mode H3| On| Off| Fan speed 1
Mode H4| On| Fan speed 1| Fan speed 1
Mode H5| On| Fan speed 1| Fan speed 2
Mode H6| On| Fan speed 2| Fan speed 3

1. The hob detects the boiling process and acti‐ vates fan speed in accordance with automatic mode.
2. The hob detects the frying process and acti‐ vates fan speed in accordance with automatic mode.
3. This mode activates the fan and the light and does not rely on the temperature.

Changing the automatic mode

1. Deactivate the hob.
2. Press for 3 seconds. The display comes on and goes off.
3. Press for 3 seconds.
4. Press a few times until h comes on.
5. Press of the timer to select an automatic mode.

To operate the hood directly on the hood panel deactivate the automatic mode of the function.
When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds.

Operating the fan speed manually
You can also operate the function manually. To do that press when the hob is active. This deactivates automatic operation of the function and allows you to change the fan speed manually. When you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed 1 press.
To activate automatic operation of the function, deactivate the hob and activate it again.

Activating the light
You can set the hob to activate the light automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
The light on the hood deactivates 2 minutes after deactivating the hob.

HINTS AND TIPS

WARNING!
Refer to Safety chapters.

8.1 Cookware
For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly.

Use the induction cooking zones with suitable cookware.

• The bottom of the cookware must be as thick and flat as possible.
• Ensure pan bases are clean and dry before placing on the hob surface.
• In order to avoid scratches, do not slide or rub the pot across the ceramic glass.

Cookware material

• correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.

Cookware is suitable for an induction hob if:

• water boils very quickly on a zone set to the highest heat setting.
• a magnet pulls on to the bottom of the cookware.

Cookware dimensions

• Induction cooking zones adapt to the dimension of the bottom of the cookware automatically.
• The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power  generated by the cooking zone.
• For both safety reasons and optimal cooking results, do not use cookware larger than indicated in “Cooking zones specification”. Avoid keeping cookware close to the  control panel during the cooking session. This might impact the functioning of the control panel or accidentally activate hob functions.
  Refer to “Technical data”.

8.2 The noises during operation If you can hear:

• crack noise: cookware is made of different materials (a sandwich construction).
• whistle sound: you use a cooking zone with a high power level and the cookware is made of different materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
  The noises are normal and do not indicate any malfunction.

8.3 Öko Timer (Eco Timer)
To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation.

8.4 Examples of cooking applications
The correlation between the heat setting of a zone and its consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power.

The data in the table is for guidance only.

from time to time.
1 – 2| Solidify: fluffy omelettes, baked eggs.| 10 – 40| Cook with a lid on.
2 – 3| Simmer rice and milkbased dishes, heat up ready-cooked meals.| 25 – 50| Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure.
3 – 4| Steam vegetables, fish, meat.| 20 – 45| Add a couple of tablespoons of liquid.
4 – 5| Steam potatoes.| 20 – 60| Use max. ¼ l of water for 750 g of po‐ tatoes.
4 – 5| Cook larger quantities of food, stews and soups.| 60 – 150| Up to 3 l of liquid plus ingredients.
6 – 7| Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.| as neces‐ sary| Turn halfway through.
7 – 8| Heavy fry, hash browns, loin steaks, steaks.| 5 – 15| Turn halfway through.

8.5 Hints and Tips for Hob²Hood
When you operate the hob with the function:

• Protect the hood panel from direct sunlight.
• Do not spot halogen light on the hood panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between the hob and the hood (e.g. with the hand, a cookware handle or a tall pot). See the picture.

The hood pictured below is for illustration purpose only.

Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on.

Cooker hoods with the Hob²Hood function
To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol .

CARE AND CLEANING

WARNING!
Refer to Safety chapters.

9.1 General information

• Clean the hob after each use.
• Always use cookware with a clean base.
• Scratches or dark stains on the surface have no effect on how the hob operates.
• Use a special cleaner suitable for the surface of the hob.
• Use a special scraper for the glass.
  The printing on the flexible induction cooking area may become dirty or change its colour from sliding the cookware.
  You can clean the area in a standard way.

9.2 Cleaning the hob

• Remove immediately: melted plastic, plastic foil, salt, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special  hob scraper on the glass surface at an acute angle and move the blade on the surface.
• Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a nonabrasive  detergent. After cleaning, wipe the hob dry with a soft cloth.
• Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth..

TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

10.1 What to do if…

connected to the electrical supply.
| The fuse is blown.| Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
| You do not set the heat setting for 60 seconds.| Activate the hob again and set the heat setting in less than 60 seconds.
| You touched 2 or more sensor fields at the same time.| Touch only one sensor field.
| Pause operates.| Refer to “Daily use”.
| There is water or fat stains on the control panel.| Clean the control panel.
You can hear a constant beep noise.| The electrical connection is incor- rect.| Disconnect the hob from the electrical supply. Ask a qualified electrician to check the installation.
You cannot select the maximum heat setting for one of the cook- ing zones.| The other zones consume the maxi- mum available power.
Your hob works properly.| Reduce the heat setting of the other cooking zones connected to the same phase. Refer to “Power management”.
An acoustic signal sounds and the hob deactivates.
An acoustic signal sounds when the hob is deactivated.| You put something on one or more sensor fields.| Remove the object from the sensor fields.
The hob deactivates.| You put something on the sensor field @.| Remove the object from the sensor field.
Residual heat indicator does not come on.| The zone is not hot because it oper- ated only for a short time or the sen- sor is damaged.| If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre.
Hob2Hood does not work.| You covered the control panel.| Remove the object from the control panel.
| You use a very tall pot which blocks the signal.| Use a smaller pot, change the cooking zone or operate the hood manually.
The control panel becomes hot to the touch.| The cookware is too large or you put it too close to the control panel.| Put large cookware on the rear zones, if possible.
There is no sound when you touch the panel sensor fields.| The sounds are deactivated.| Activate the sounds. Refer to “Daily use”.
The flexible induction cooking area does not heat up the cook- ware.| The cookware is in a wrong position on the flexible induction cooking area.| Place the cookware in the correct position on the flexible induction cooking area. The position of the cookware depends on the activated function or function mode. Refer to “Flexible induction cooking area”.
Problem| Possible cause| Remedy
---|---|---
| The diameter of the bottom of the cookware is incorrect for the activa- ted function or function mode.| Use cookware with a diameter applicable to the activated function or function mode. Refer to “Flexible induction cooking area”.
The indicator above the symbol comes on.| Child Safety Device or Lock oper- ates.| Refer to “Daily use”.
The control bar blinks.| There is no cookware on the zone or the zone is not fully covered.| Put cookware on the zone so that it fully covers the cooking zone.
| The cookware is unsuitable.| Use cookware suitable for induction hobs. Refer to “Hints and tips”.
| The diameter of the bottom of the cookware is too small for the zone.| Use cookware with correct dimensions. Refer to “Technical data”.
| FlexiBridge (Flexible Bridge) oper- ates. One or more sections of the function mode which operates are not covered by the cookware.| Place the cookware on the correct number of sections of the function mode which operates or change the function mode. Refer to “Flexible induction cooking area”.
The control bar blinks twice and turns off.| PowerSlide operates. Two pots are placed on the flexible induction cooking area or the cookware covers more than one cooking area activated by the function.| Use only one pot. Refer to “Flexible in-duction cooking area”.
al and a number come on.| There is an error in the hob.| Deactivate the hob and activate it again after 30 seconds If El comes  on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre.

10.2 If you cannot find a solution…
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and  Authorised Service Centres are in the guarantee booklet.

TECHNICAL DATA

11.1 Rating plate

11.2 Cooking zones specification

Cooking zone| Nominal power (maximum heat setting) [W]| PowerBoost [W]| PowerBoost maximum duration [min]| Cookware diame‐ ter [mm]
---|---|---|---|---
Middle rear| 1800 / 3500| 2800 / 3700| 10 / 10| 145 – 245 / 245 – 280
Right front| 2300| 3200| 10| 125 – 210
Right rear| 2300| 3200| 10| 125 – 210
Flexible induction cooking area| 2300| 3200| 10| minimum 105

The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
For optimal cooking results use cookware no larger than the diameter in the table.

ENERGY EFFICIENCY

**12.1 Product Information***

W 22.0 cm
Length (L) and width (W) of non circular cooking zone| Right rear| L 22.3 cm W 22.0 cm
Length (L) and width (W) of the cooking area| Left| L 45.9 cm W 21.4 cm
Energy consumption per cooking zone (EC electric cooking)| Middle rear

Right front Right rear

| 196.6 Wh / kg
189.1 Wh / kg
189.1 Wh / kg
Energy consumption of the cooking area (EC electric cooking)| Left| 191.1 Wh / kg
Energy consumption of the hob (EC electric hob)| | 191.3 Wh / kg

• For European Union according to EU 66/2014. For Belarus according to STB 2477-2017, Annex A. For Ukraine according to 742/2019.
  EN 60350-2 – Household electric cooking appliances – Part 2: Hobs – Methods for measuring performance.
  The energy measurements referring to the cooking area are identified by the markings of the respective cooking zones.

12.2 Energy saving
You can save energy during everyday cooking if you follow the hints below.

• When you heat up water, use only the amount you need.
• If it is possible, always put the lids on the cookware.
• Put the cookware directly in the centre of the cooking zone.
• Use the residual heat to keep the food warm or to melt it.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website to:

| Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support
---|---
| Register your product for better service: www.registeraeg.com
| Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.

Warning / Caution-Safety information
General information and tips
Environmental information

www.aeg.com/shop
867372772-D-352022

Documents / Resources

| AEG IKE95771FB Induction Hob [pdf] User Manual
IKE95771FB Induction Hob, IKE95771FB, Induction Hob, Hob
---|---

References

• AEG Accessories & Spare Parts Homepage
• Welcome to AEG
• Home | AEG Product Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>