ACCUR8 YD8266WUK-BL Weather Forecast Station User Manual

: June 3, 2024
: ACCUR8

Table of Contents

Introduction
General Safety Instructions
Overview
Functions
Initial Setup
Measurement Specifications
Service
Disposal
Documents / Resources

User Manual
ACCUR8 Weather Forecast Station
YD8266WUK-BL (black version) & YD8266WUK-WH (white version)

Introduction

Thank you for purchasing this ACCUR8 product. This user manual is to be considered a component of the device. Read carefully before using the device. Keep in a safe place for future reference. When the device is sold or given to someone else, the user manual must be provided to the new owner/user of the product. As part of our ongoing policy to improve the design and specification of our products, we reserve the right to change any detail given without prior notice. Tempcon Instrumentation Ltd shall not be responsible for any liability of any nature which may result from the use of any information provided in technical literature. Errors and technical changes excepted.
© 2022 Tempcon Instrumentation Ltd. All rights reserved.

General Safety Instructions

Risk of electric shock
Only use the device as described in the manual; otherwise, you run the risk of an electric shock.

Children must only use the device under adult supervision.
Disconnect the device from the power supply before starting any maintenance or cleaning of the device.
Position your device so that it can be disconnected from the power supply at any time. The power socket should be installed near the device and should be easily accessible as the mains cable plug is used to disconnect the device from the power supply.
Before starting up the device, check the device, the cables, and the connections for signs of damage.
To disconnect the device from the power supply, always pull on the plug. Never pull on the cable.
Never use a damaged device or a device with damaged live parts.
Only use the display console in completely dry environment and do not touch it with wet or moist parts of your body.

Risk of suffocation/choking

Keep packaging materials (plastic bags, rubber bands etc.) away from children. They can cause suffocation.
This product contains small parts that could be swallowed by children. There is a risk of choking.

Risk of fire/explosion

Do not expose the device to high temperatures. Use only the supplied power supply or the recommended batteries. Do not short-circuit the device or batteries or throw them into a fire. Excessive heat or improper handling could trigger a short circuit, a fire, or an explosion.

Risk of damage to property

Never disassemble the device. In the event of a fault, please contact your retailer.
Do not expose this device to high temperatures and protect it from water and high humidity.
Do not immerse the unit in water.
Protect the device from severe shocks or excessive vibrations.
For this device, only use accessories and spare parts that comply with the technical information.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. Remove the batteries from the unit if it has not been used for a long time.
Rechargeable batteries are not recommended.

Risk of voltage damage
The manufacturer is not liable for voltage damage due to improperly inserted batteries or through the use of an improper power adaptor.

Overview

1. Time with MSF UK radio-controlled time signal
2. Snooze icon
3. Day and Month
4. Weekday display
5. Indoor temperature trend
6. Indoor temperature and humidity
7. Indoor icon
8. Remote sensor 1 temperature and humidity
9. Remote sensor 2 temperature and humidity
10. Remote sensor 3 temperature and humidity
11. Alarm
12. Radio-controlled time indicator
13. Weather forecast
14. Barometer tendency
15. Hanging hole
16. MEM button| 17. CH button
18. SNZ/LIGHT button
19. UP button
20. DOWN button
21. MODE button
22. DC power socket
23. Battery cover
24. Stand
25. Temperature and humidity (remote sensor)
26. LED indicator
27. Hanging hole
28. Channel button
29. Battery cover
---|---

Functions

Weather forecast indicated by six icons
Temperature trend indicators
Radio-controlled time from the from the MSF signal in the UK
Indoor temperature and humidity display
Three channels for display of readings from the included outdoor remote temperature and humidity sensors
Weekday display in English
Alarm function
Alarm snooze for five minutes
Day and date display

Initial Setup

Plugging in the adaptor automatically switches on the backlight of the display console, then pressing SNZ / LIGHT button, sets the backlight brightness HI > LO > OFF
Note: If the Display Console is powered solely by batteries; in order to conserve battery power, the display console screen will illuminate for a few seconds after the SNZ/LIGHT button is pressed, then will go dim until the SNZ/LIGHT button is pressed again.
Insert batteries in the display console

Remove the battery compartment cover
Insert 3 x AAA batteries
Reattach the battery compartment cover

Insert batteries in the remote sensors

Remove the battery compartment cover
Select a channel
Insert 2 x AAA batteries
Reattach the battery compartment cover
Place each sensor within 30 m (98 ft) of the display console.

Radio-controlled Time Reception

RCC reception is initiated when the display console is powered up
To manually start RCC reception; in Setting mode, press and hold the DOWN button to start searching for the radio-controlled time signal.

Important notes:

It can help to place the display console near an open window while it is searching for the radiocontrolled time signal
When searching for the radio-controlled time signal, the display screen will be dimmed
If the display console will still not receive the RCC signal, please proceed to set the time manually.

Manual Time Setting

In Normal mode, press MODE for three seconds to enter the Time Setting mode.
Setting order: hour > minute > year > month > day > 12 / 24hr > exit
Press MODE to confirm the setting result and move to the next setting item
Press UP to increase the value by one unit; press and hold UP for more than two seconds to advance at eight steps per second
Press DOWN, to decrease the value by one unit; press and hold DOWN for more than two seconds decrease eight steps per second
No changes to settings within 20 seconds will save the settings and exit.

Alarm Setting

In the standard mode, press the MODE button to view the alarm time, press the UP or DOWN switch on/off the Alarm
In Alarm mode, press MODE button for three seconds to enter Alarm setting mode
Setting order: hour > minute > exit
In the setting, press UP and DOWN to adjust the setting item, press SET to confirm
Alarm ringing time is two minutes
When the alarm is on, press SNZ / LIGHT to delay the alarm for five minutes. To stop the alarm, press any other button.

°C/°F selection
Press UP button to select
Viewing Maximum and Minimum Recorded Values
Press MEM to view the maximum and minimum temperature and humidity values recorded.
In maximum and minimum modes, press and hold for three seconds to clear the maximum and minimum values.
Day of Week Display Receiving the Remote Sensor (RF) Signals

When powered on, the display automatically seeks to receive the RF signal for three minutes, and the antenna icon will flash.
Once the signal is received, the display will receive the outdoor temperature and humidity at the same time.
In standard mode, press CH once to change RF channel.
Press and hold CH to re-register RF data for all channels
In the case of RF registration failure or missing code time for more than one hour, the temperature and humidity section will flash “–.-”.
To manually initiate a remote sensor search, press and hold CH.

Temperature Trend Indication

When the temperature rises by 1°C / 2°F, the arrow points up
When the temperature drops by 1°C / 2°F, the arrow points down
If no change, there will be no arrow
The temperature comparison is the current data with the data for the previous three hours. Data isrecorded every 30 minutes.

Weather Forecast
Your home’s weather forecast is indicated by six icons.

Measurement Specifications

Indoor Temperature

Temperature range 0°C to 50°C
Precision ± 1°C (0°C to 50°C)
Resolution 0.1°C
If the temperature is below 0°C, the display shows ‘Lo’, if higher than 50°C, it shows ‘Hi’.

Indoor and Outdoor Humidity

Humidity 20% to 99%
Precision +/- 5 % RH (30%RH to 85%RH)
Precision +/- 10% RH (20%RH to 30%RH; 85%RH to 99%RH)
Resolution 1% RH
If the humidity is below 20%, the display shows ‘Lo’, if higher than 99%, it shows ‘Hi’.

Outdoor Temperature

Temperature range -40°C to 70°C
Precision ± 1°C (0°C to 50°C), ± 2°C (-40°C to 0°C; 50°C to 70°C）
Resolution 0.1°C
If the temperature is below -40°C, the display shows ‘Lo’, if higher than 70°C, it shows ‘Hi’.

Service

Please contact us for any questions regarding the product or claims, preferably by email.
ACCUR8
Ford Lane Business Park
Ford
West Sussex BN18 0UZ
UK
Email: [email protected]
Phone: +44 (0)1243 558 280
www.accur8tech.com
ACCUR8 is a registered trademark of Tempcon Instrumentation Ltd

Disposal

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on proper disposal. Do not dispose of electronic devices in the household rubbish! Used electronic devices must be collected separately and recycled in an environmentally friendly manner. Do not dispose of batteries and rechargeable batteries with the household waste. After they are used, the batteries can be returned to our point of sale or to a nearby location (for example, retailers or municipal collecting points).
Batteries and rechargeable batteries are marked with a symbol of a crossed-out dustbin and the chemical symbol of the pollutant. “Cd” stands for Cadmium, “Hg” stands for mercury and “Pb” stands for lead.
Document Version 1.7
This page has been intentionally left blank.

Documents / Resources

| ACCUR8 YD8266WUK-BL Weather Forecast Station [pdf] User Manual
YD8266WUK-BL, YD8266WUK-WH, YD8266WUK-BL Weather Forecast Station, YD8266WUK- BL, Weather Forecast Station, Forecast Station, Station
---|---