ultra site 338S-V 46 Inch Single Pedestal Table Owner’s Manual

ultra site 338S-V 46 Inch Single Pedestal Table

SAFETY WARNINGS & EQUIPMENT INSPECTION

• Owners and installers please note these safety warnings and make use of this checklist on a regular basis.

• Follow installation instructions when erecting equipment.

•  Ground surfaces around equipment should be restored as needed. Concrete footings should never be exposed. Surface depth should comply with ASTM and CPSC specifications.

•  Check for and repair damage caused by wear or vandalism, a major factor in injury causing situations.

•  All protruding bolts should be covered or cut off and finished smooth. Sharp edges on pipes should be capped or removed. Check for bent, broken, or severly worn pipe, and replace.

•  All equipment should be free of rust and repainted whenever necessary to deter rusting.

•  We provide our customers with layout sheets and installation instructions. Please keep on file the specifications sheet that contains the listing of every part used.

• Never add components not intended for use with this product.

•  Regular maintenance is necessary in this and all park and recreational equipment to insure the safety of the user.

•   Note:
  Proper maintenance of equipment requires regular tightening of all bolts, nuts, and setscrews.

•   Regular checking of all parts, castings, etc. should be made. If a part is broken or worn, it should be replaced immediately.

•  Check to be sure all fittings are tight and that bars and pipes do not move.

• Replace all worn S-hooks. S-hooks must be completely closed. Failure to close S-hooks can result in serious injury to the user. NEVER reuse S-hooks.

•  Test for free movement of swing hanger and other moving attached parts.

• Check for worn chains and replace them.

•  A soft resilient surface should be placed under all swings extending at least twice the height of the top rail both front and back.

HARDWARE

• 7/16″ x 5-1/2″ Machine Bolt

• 7/16″ Washer

• 7/16″ Hex Nut

• 5/16″ x 1″ Machine Bolt

• 5/16″ Washer

• 5/16″ Kep Nut

• 3/8″ x 1″ Carriage Bolt

• 3/8″ Washer

• 3/8″ Hex Nut

TOOLS REQUIRED

ULTRA SITE PRODUCT SPECIFICATIONS

338S-V 46” SQUARE INGROUND TABLE WITH 4 SEATS
Top & Seats: 11 gauge die formed angle frame 1”x1-7/8” with 3” radius corners. 3/4” #9 steel expanded metal. 7 gauge x 1-1/2” flat bar center support and mounting bracket understructure. Top is additionally diagonally supported to the corners with 7 gauge x 1-1/2” flat bar. Electrically MIG welded.
Coating: Oven fused functionalized polyethylene copolymer-based thermoplastic. Fluidized bed coating application with superior mechanical performance, impact resistance and UV-stability.
Frame: Main support column is 4”x4”x11 gauge pre-galvanized structural steel tubing. Arms are fabricated from 2-7/8” O.D. x 12 gauge pre-galvanized structural steel tubing welded to 3/8″ laser cut plates for attachment to the main column and 2”x2”x3/16” structural steel angle for lateral seat support. Seat attachment points are 10 gauge precision punched tabs. Table top attachment structure is fabricated from 2”x2”x3/16” structural steel angle and top attachment points are 7 gauge x 1-1/2” steel flat bar.
Frame Coating: Electrostatic powder coated application oven cured.
Hardware: All stainless steel hardware fasteners.
Dimensions: Top is 46” square x 30-1/4” high. Seats are 12” wide x 36” long x 18” high. Outside to outside dimensions of 4 seat table is 76-1/2” square.

COMPONENTS

STEP 1

• Attach the 338 Vinyl Arms to the 338 Post using specified hardware.

STEP 2

• Attach the H Bracket to the 338 Post using specified hardware.

STEP 3

• Attach the 46″ Square Top to the H Bracket using specified hardware.

STEP 4

• Attach the 3′ Seats to the 338 Vinyl Arms using specified hardware.

FOOTINGS

• Estimated Required Concrete: 12 – 50 lb Bags of Concrete Mix

OVERALL DIMENSIONS

Documents / Resources

| ultra site 338S-V 46 Inch Single Pedestal Table [pdf] Owner's Manual
338S-V, 46 Inch Single Pedestal Table, Single Pedestal Table, Pedestal Table, 338S-V, Table
---|---

References

• Ultrasite | Global Website Builder | Create a World-Class Website Today

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>