SSYING V5 HD WiFi Video Doorbell Camera User Manual
- June 3, 2024
- SSYING
Table of Contents
SSYING V5 HD WiFi Video Doorbell Camera
Specification
-
PIR Motion Sensor
-
Infrared LED x 6
-
Light Sensor
-
166° HD Camera
-
Microphone
-
Push Button
-
LED Indicator
-
Speaker
-
AC 8V-24V Power Interface
-
Reset Button
-
Micro USB Port (Battery Charging)
-
Battery door
Mounting Bracket -
Power Contact Base
-
Mounting Screw Holes *4
-
Wire Terminals
IN THE BOX
Hardwiring
Connect the wires coming out of your wall to the screws on the back of your doorbell. Please make sure the red wire can only connect to the left screw and the other wire can only connect to the right screw.
OR BATTERY POWER
Charging Time: 14 hours using 1 A USB charger (not included) (via the doorbell micro USB port)
Please fully charge the 18650 batteries before use .The batteries can last around 3 to 4 months between recharges with normal use (5-min events a day). This also depends on events captured.
Live View: Up to 30 hours
Lots of events:
If your device is capturing an excessive number of events every day, you might
need to recharge your battery sooner. Plus, the battery is also drained each
time you use the Live View to look or speak through your doorbell. To prevent
excessive events, you can adjust your motion settings to a lower sensitivity.
WARNING
Be sure to put 18650 batteries in the correct direction. Inserting batteries
incorrectly will cause permanent damage.
SET UP YOUR VIDEO DOORBELL IN THE TO-SEE APP
- Step 1 Download the To See app. The To See app will walk you through setting up and remotely controlling your Doorbell. Search for “To See” on the Android And Ios.
- Step 2 Open the Tosee app on your cellphone. Tap “+”, then tap ”.ADD Device”.
- Step 3 Open the battery cover and pull out the insulation tabs.
- Step 4 Tap “The Red Light is Flashing”.
- Step 5 Tap “Enter the Configuration Interface”.
- Step 6 Navigate to WiFi settings on your cellphone, then connect to “TOSEE _ XXXX”
- Step 7 Go back to the To see app, then tap “Next”.
- Step 8 Find the name of your WiFi network and tap on it. Enter your WiFi password, then tap “Next”.
- Step 9 Enter your device administrator password, then tap “Next”.
- Step 10 Enter your device name and tap “Complete”.
- Step 11 Tap the doorbell Live View. If you can see the Live View, you’re all set!
NOTICE:
Be sure to turn on push notifications on your phone.
- Navigate to Settings-> Notifications-> ON
- A list of apps that support push notifications will appear.
- Tap the To See and choose your options.
APP LIVE VIEW INTERFACE
- Back
- Share
- Settings
- Battery
- Volume
- Playback
- Video effects
- Full screen
- Screenshot
- Talk to visitors
- Record
INSTALL YOUR VIDEO DOORBELL ON THE WALL
Mark 4 drill holes and use a bit to drill holes in your wall and insert the anchors. Secure your doorbell on the wall with 4 mounting screws and 1 security screw.
TROUBLESHOOTING
Q: How to share you video doorbell with your family?
Open the To See App:
- From the home page, tap the doorbell Live View.
- Tap the “Share icon” in the top right corner.
- Enter the device administrator password, the tap “Confirm”.
- Tap”+”.
- Enter the new user’s Nickname, then tap “Confirm”. You will see a QR code.
- Open the To See App on the new user’s cellphone.
- From the home page, tap “+” in the top right corner.
- Tap “Scan QR code”, then scan the QR code generated before.
- You will see ” Success”, then tap “Confirm”.
- Enter a Device Name. Tap “Confirm” and you’re all set!
Q: How to adjust PIR motion detection sensitivity?
- From the device list page, tap the “Live view.”
- Tap “Settings” in the top right corner.
- Tap “Motion Detection Sensitivity.” PIR Motion Detection Sensitivity
- PIR Motion Sensor Disabled
- 1 0-second delay trigger on Pl R motion detection
- 5-second delay trigger on PIR motion detection
- No Delay on Pl R motion detection
Wireless Chime (Optional)
Connect the video doorbell to the doorbell chime, and get instant alert in your home when someone rings the doorbell. Hear the doorbell chime when you are home, without checking your video doorbell app! The chime plugs into any wall outlet, you can place it anywhere in the home.
NOTICE
The video doorbell is only compatible with our w ireless chime, and not
compatible with traditional doorbell chimes. The wireless chime is optional.
If it is not installed, doorbell notifications will still go directly to the
ToSee app.
THE BASICS
Getting Started
Set up your chime with the video doorbell
FAQs
How many people can see the video at once?****
Only one user can utilize the direct intercom, however up to four users can watch the video broadcast. Android and iOS work together.
Is WiFi at 5GHz supported?****
Not at all; only 2.4GHz WiFi is accepted.
My SSYING V5 doorbell signal is weak; what gives?****
If your wireless router and doorbell are too far apart or there are obstacles between them, the signal will be weaker. You might try moving your router or purchasing a wireless router signal repeater or extension.
How is a SSYING V5 doorbell RESET?****
For six seconds, press and hold the RESET button.
Do SSYING V5 doorbell cameras record all the time?****
Most doorbell cameras do not continuously record. They only record when the camera is activated. To ensure you don’t miss the footage, they then send a notification to your phone. A few cameras actually record continuously.
How long do SSYING V5 doorbell cameras store video?****
Accordingly, a video can stay in your account for up to 180 days—or even just one day—after the date of initial recording. The standard period of video storage is 60 days (in the US). In the Ring App or on Ring.com, you can manually change your storage period from 1 day to 180 days.
Does SSYING V5 Doorbell tell you when someone is at the door?****
When someone knocks on your door, the Ring Video Doorbell connects to your home Wi-Fi network and instantly notifies your smartphone or tablet.
How does SSYING V5 Doorbell work when you are away from home?****
Ring runs on a straightforward idea. When someone rings your doorbell, the signal moves from your smartphone back down to Ring’s cloud servers through your WiFi network.
How far can SSYING V5 doorbell cameras hear?****
When we first tested the Ring Video Doorbell 3 Plus in one of our labs, we discovered that the maximum distance at which we could comprehend audio recorded at a conversational volume was 18 feet.
Do SSYING V5 doorbell cameras work without WiFi?****
Do doorbell cameras require WiFi? is a frequently asked question. The quick and simple response is no. Although doorbell cameras do not require WiFi to operate correctly, it is nevertheless advised that you instal them with a reliable internet connection.
What triggers a SSYING V5 doorbell camera?****
When the doorbell is pressed, the camera starts recording. The doorbell will ring if you are home. If not, the camera sends a signal to a desktop or mobile app that identifies the person at the door.
How far does SSYING V5 Doorbell see?****
Your Ring Video Doorbell’s motion sensors are made to pick up movement up to 155 degrees horizontally and five to 25 feet away from the fixture. Additionally, they are more sensitive to horizontal than to vertical movement within the detection area.
How long does SSYING V5 video doorbell battery last?****
The official rating for Ring Doorbell batteries from a full charge is somewhere between six and twelve months (ratings vary based on models) before needing to be recharged. Better scores are typically found in newer models, like 10 to 12 month models.
Can someone else disable your SSYING V5 doorbell?****
Deactivating a device makes it inactive forever. A Ring device can only be deactivated by the owner. After your device is deactivated, none of the settings will be accessible to you for control or modification.
Do SSYING V5 doorbell cameras work at night?****
Similar to security cameras, video doorbells record audio using a speaker and microphone and video using infrared LED sensors or a spotlight during the day or at night.