innovative STX-02-SLD Staxx Dual Articulating Monitor Mount Instruction Manual
- June 4, 2024
- INNOVATIVE
Table of Contents
innovative STX-02-SLD Staxx Dual Articulating Monitor Mount
Innovative Ergonomic Solutions 800 524 2744
customerservice@team-ies.com team-
ies.com
HAT Collective
408 437 8770
cs@hatcollective.com
hatcollective.com
PARTS LIST
INSTALLATION
DESK CLAMP CONFIGURATION
STEP1
STEP2 INFORMATION
If the monitor arm or pole does not easily fit into the mount, remove the
bushing from the mount and place it on the monitor arm or pole and press
firmly back into the mount.
STEP3
STEP4
STEP5
IMPORTANT: When
inserting pole into mount, the dimples should be aligned perpendicular to the
rear edge of mounting surface.
STEP6
STEP7
IMPORTANT: Install part (G) in the orientation as shown. When
washer, part (G), is installed correctly, the lower extension arms will not
rotate past the back of the mount.
STEP8
STEP9
STEP10
STEP11
STEP12
STEP13
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>