EXPED EXPAF215M Ultra Pillow Instructions
- June 3, 2024
- EXPED
Table of Contents
EXPAF215M Ultra Pillow
Instructions
Inflation:
- Open the inflation valve and inflate by blowing until the desired thickness is reached.
- Valve caps are most easily closed by pressing down with one thumb at cap hinge while walking your other thumb around the edge of the cap.
Use and Care:
-
Integrated fabric grommets: the 2 fabric grommets allow the pillow to be attached to a mat. We recommend Exped’s slitlines or 10 mm accessory straps.
-
Since the abrasive force of dirt is a fabric’s primary enemy, use mild soap and water to occasionally wash the pillow. Do not machine wash or tumble dry.
-
Beware of exposure to heat: Do not expose an inflated pillow to direct sunlight or heat sources.
This may cause the air to expand and put excessive pressure on the seams which could then fail. -
Keep pillow away from sharp objects like thorns, corals, jagged stones or similar.
-
Do not use mechanical air pumps which could lead to over pressure and rupture the seams.
-
Check valve periodically to ensure a positive seal. Debris can be removed with a damp cloth.
Packing:
- Open the valve and slide attached deflation pin into valve to keep one-way-flap open. Now fold the pillow and roll from the opposing side to the valve. Press out all the air, then pull out deflation pin and close the valve. Then slip into the stuffsack.
Storage:
- If the pillow gets wet, lay out with valve open in warm place.
- Be sure to store the pillow unpacked with valve open!
- When storing take care to keep it away from pets. Sharp claws and teeth kill pillows.
Tips and Tricks:
- Moving the pillow from a warm to a cold place can drastically reduce the volume of the pillow. This may look like a leak, but it is perfectly normal physics!
- For more information visit www.exped.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>