Gateman GM578-7C SS Cylindrical Lock Instruction Manual
- June 3, 2024
- Gateman
Table of Contents
Gateman GM578-7C SS Cylindrical Lock
HOW TO INSTALL
- MARK DOOR & BOREHOLES
- Fold the template over edge of door, and mark site 60 mm or 70 mm of holes.
- Bore o54mm andø23mm holes through door
- Cut out a 58126x3mm Base.
- REMOVE INSIDE KNOB
- Use installtion tool to depress catch and pull inside knob.
- INSTALL BODY
- Install latch and tighten/ it with screws
- Rotates outside rose make sleeve projęcting be Symmetrical about do0, The latchlink with the body dependably.
- INSTALL INSIDE KNOB
- Tighten mounting plate with screwš.
- Tighen inside rose with tool.
- Push inside knob all the way in until catch on body clicks into catch hole.
- INSTALL STRIKE
ADJUSTABLE KEYWAY FOR KEY-IN-KNOB
Turn knob clockwise until align catch wițh small hole,inşert key and
turning counterclock about 45 degrees. Use tool to depreşs catch and pull off
outside knob. After turning 180 degrees, install again.
Door thickness 35-50mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>