LED DRL 2005-2011 Toyota Tacoma Fog Lights Installation Guide
- June 1, 2024
- LED DRL
Table of Contents
LED DRL 2005-2011 Toyota Tacoma Fog Lights
TOOLS YOU NEED BEfORE INSTALLATION
WARM TIPS BEFORE ASSEMBLY
- Professional assembly is highly recommended.
- Please make sure that your model and year are the same as the ones written on our product page before you install it. If not, pis feel free to contact us via Amazon.com
- Please check the connection of the original wiring harness. Install the new fog light carefully according to the steps in the manual guide. Wrong steps may lead to unlit, burning out, flickering conditions etc.
- Make sure your vehicle is parked and turned off. Please engage the parking brake.
- We are not responsible for any damages or injuries due to improper installation.
- Please refer to the guidance steps before you get started, to ensure correct installation.
WHAT IS IN THE BOX
WIRING PRINCIPLE SCHEMATIC
Some need-to-know Information
- If our box contains switch wiring harnesses, please make sure to use our matching fog lights and switch wiring harnesses, otherwise there may be discomfort.
- If your vehicle is originally equipped with fog light frames, please ignore F parts because you can use the original one. Thee turn signal only needs to be on when turning, so the turn signal wire needs to be connected to the ACC wire (ACC wire has the function of controlling on/off.)
STEP-BY-STEP INSTALLATION GUIDE
STEP 1 Identify the wire plugs
STEP 2 Identify 2 different wire harnesses
STEP 2-1 Identify 2 different wire harnesses
STEP 3 The correct way to connect fog light plugs
Please connect the wires to the corresponding colour (black wire to black wire), otherwise, your fog lights will not work.
STEP 4 The correct way to connect DRL light plugs
Please connect the wires to the corresponding colour (black wire to black wire), otherwise, your DRL and turn signal lights will not work.
STEP 5 Remove the old fog light
Prepare a Phillips screwdriver, and use it to unscrew.
STEP 6
Unscrew the screws and dismantle the old fog light.
STEP 7
Unplug the harness connector of the old lamp.
STEP 8
Plug in the harness connector, and connect the input ports and the output
ports.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>