Spectrum S1100 G2 AC Smart Charger Instruction Manual
- June 3, 2024
- SPECTRUM
Table of Contents
S1100 G2 AC Smart Charger (1 x 100W)
Instruction Manual
S1100 G2 AC Smart Charger
Scan the QR code and select the Manuals & Support tab from the product page for the most up-to-date information
http://horizonhobby.cc/3DL9xU2?r=qr
NOTICE
All instructions, warranties and other collateral documents are subject to
change at the sole discretion of Horizon Hobby, LLC. For up-to-date product
literature, visit horizonhobby.com or
towerhobbies.com and click on the support or resources tab for this product.
Meaning of Special Language
The following terms are used throughout the product literature to indicate
various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the
probability of property damage, collateral damage, and serious injury OR
create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the
probability of physical property damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility
of physical property damage AND little or no possibility of injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the
features of the product before operating. Failure to operate the product
correctly can result in damage to the product, personal property and cause
serious injury.
This is a sophisticated hobby product. It must be operated with caution and
common sense and requires some basic mechanical ability. Failure to operate
this product in a safe and responsible manner could result in injury or damage
to the product or other property. This product is not intended for use by
children without direct adult supervision. Do not attempt disassembly, use
with incompatible components or alter product in any way without the approval
of Horizon Hobby, LLC. This manual contains instructions for safety, operation
and maintenance. It is essential to read and follow all the instructions and
warnings in the manual, prior to assembly, setup or use, in order to operate
correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
NOTICE: This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
WARNING: To reduce the risk of fire or electric shock, carefully follow
these instructions.
General Charging Warnings
** WA R** NING: Failure to exercise caution while using this product and comply with the following warnings could result in product malfunction, electrical issues, excessive heat, FIRE, and ultimately injury and property damage.
- NEVER LEAVE CHARGING BATTERIES UNATTENDED DURING USE.
- NEVER CHARGE BATTERIES OVERNIGHT.
- Never attempt to charge dead, damaged or wet battery packs.
- Never attempt to charge a battery pack containing different types of batteries.
- Never allow children under 14 years of age to charge battery packs.
- Never charge batteries in extremely hot or cold places or place in direct sunlight.
- Never charge a battery if the cable has been pinched or shorted.
- Never connect the charger if the power cable has been pinched or shorted.
- Never connect the charger to an automobile 12V battery while the vehicle is running.
- Never attempt to dismantle the charger or use a damaged charger.
- Never attach your charger to both an AC and a DC power source at the same time.
- Never connect the input jack (DC input) to AC power.
- Always use only rechargeable batteries designed for use with this type of charger in the correct programming mode.
- Always inspect the battery before charging.
- Always keep the battery away from any material that could be affected by heat.
- Always monitor the charging area and have a fire extinguisher available at all times.Always end the charging process if the battery becomes hot to the touch or starts to change form (swell) during the charge process.
- Always connect the charge cable to the charger first, then connect the battery to avoid short circuit between the charge leads. Reverse the sequence when disconnecting.
- Always connect the positive red leads (+) and negative black leads (–) correctly.
- Always disconnect the battery after charging, and let the charger cool between charges.
- Always charge in a well-ventilated area.
- Always terminate all processes and contact Horizon Hobby if the product malfunctions.
- Charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
WARNING: Never leave charger unattended, exceed maximum charge rate,
charge with non-approved batteries or charge batteries in the wrong mode.
Failure to
comply may result in excessive heat, fire and serious injury.
CAUTION: Always ensure the battery you are charging meets the
specifications of this charger and that the charger settings are correct. Not
doing so can result in excessive
heat and other related product malfunctions, which can lead to user injury or
property damage. Please contact Horizon Hobby or an authorized retailer with
compatibility questions.
Specifications
Output Port Connector | IC3®and IC5®(EC3™/EC5™compatible) |
---|---|
Input Voltage (required power supply) | AC 100–240V |
Charge Current | 0.1 – 10.0A |
Discharge Current | 0.1 – 1.5A |
Max. Charge Power | 100W |
Max. Discharge Power | 10W |
Balance Current | 1.5A/cell |
Balance Cells | 2–6S |
Supported Battery Types
(cell count)| LiFe/LiIon/LiPo/LiHv (1–6S)
NiMH/Cd (1–16S)
Pb (1–12S)
Display| 2.4” 320 × 240 IPS LCD
Operating Temperature| 0–40°C (32–104°F)
A| Power ON/OFF Switch
---|---
B| Power Input (AC 100–240V)
C| USB In (Update Port)
D| USB Out (Power Port)
E| Display Screen
F| Menu Up/Down Buttons
G| Menu Back Button
H| IC3/IC5 Charge Port Slider
I| Menu Select Button
J| Balance Port
K| IC5 Battery Charge Port
L| IC3 Battery Charge Port
Navigating the Charger
Navigation of the charger menus is accomplished using the push buttons on the top of the charger.
- Press the Menu/Select button to select a menu item.
- Press the Down arrow button to scroll down a menu list.
- Press the Up arrow button to scroll up a menu list.
- Press the Back button to return to the previous menu.
Charge port connector selection
The charging port is capable of charging with an IC3 or IC5 connector.
- Slide the port cover down to use the IC3 connector.
- Slide the port cover up to use the IC5 connector.
IMPORTANT: Do not remove the charging port cover.
Operating the Charger
Before operating the charger, know your battery’s specifications and any battery-specific safety warnings.
-
Connect the included AC cord to the charger and appropriate power supply to power on your S1100 Smart Charger. Turn ON the charger using the ON & OFF switch located on the back of the charger. The charger will initialize and display the home screen after switching the charger to “ON”.
-
Connect the battery to the port on the front of the charger.
-
Connect the battery balance lead, if available, to the balance port on the right side of the IC3 and IC5 port. Make sure the balance lead is positioned correctly all the way to the left side of the balance port.
Smart Batteries: If charging a Spektrum Smart Battery, the Battery Cell Count, Battery Type, Battery Charge Current Rate and Battery Capacity are set automatically and the charger will begin charging automatically when the battery and the balance lead (if available) are connected to the charger. G1 Spektrum Smart batteries are compatible with G2 Spektrum Smart chargers. -
Press and release the menu button to display the Charger Settings list:
Charger Settings
**** Task| Select Charge, Discharge, or Storage
---|---
Battery (Type)| Select the appropriate battery chemistry
Cells (Cell Count)| Set the number of cells in the battery (this value auto- detects if using a SpektrumTM Smart battery or if the battery balance lead is connected to the balance port)
Current| Set the charge current
Start| Start the charge cycle
Smart Battery
Settings| Configure the settings on your Smart battery
System Settings| Charger settings
Charger History| Displays number of charger cycles on the day, total number of cycles, charger temperature,
and input power -
Select the desired task.
-
Confirm the settings are correct for the battery being charged.
WARNING: Always check charging parameters before initiating the charge process. Charging any battery with improper settings , including charging a battery in the wrong mode, can result in property damage and fire. -
Scroll to the Start menu item.
-
Press and release the menu button to begin charging.
During the charging process:
-
While the battery is charging the main screen will provide:
• Charged percent
• Battery data
• Charge rate
• Capacity charged
• Charge time remaining (Smart batteries only)
• Total charge time -
Scroll to the next screen to see additional cell voltage information.
-
Scroll to the last screen to see the battery’s internal resistance.
-
When the fast charge cycle is complete, the charger will beep once and the Battery Bar will change to green. The charger is balancing the battery cells.
To stop the charging cycle:
- Press and release the back button during the charge or press and hold the menu button.
- Select the Stop menu item. The charger will stop charging and return to the ready screen.
WARNING: Always stop the charging cycle or remove power supplied to the
charger if you notice any irregularities (like a swollen battery) during
charging.
When charging is complete:
The charger will beep once to indicate the fast charging is done. Once the
charger is finished balancing the battery’s cells it will double beep twice.
- The main screen will display a green battery bar at the top to indicate the battery is full and the charging process has finished.
- The total capacity charged and total charge time will be displayed
- Disconnect the battery from the charger. The battery is ready and the charger will return to the home screen.
Icon | Description | Icon | Description |
---|---|---|---|
**** | Charging | **** | Input Voltage |
Current | Output Voltage | ||
Task | Storage Voltage | ||
Start | Backlight | ||
Back | Volume | ||
Forward | Touch Sensitivity | ||
Input Power | Completion Tone | ||
Settings (Battery/System) | **** |
Fault/Error/Fault Log
Temperature| Cycles
Date| No Battery Detected
Internal Resistance| Charger/ Charger History
Battery History| Info
Mode| Chemistry
Smart Settings
The Smart selection is available if a Smart battery is connected. Smart
settings include:
Auto Storage| Select to run Auto Storage function with a delay between 12 and
240 hours
---|---
Charge Current| Change the default charge current for your Smart battery
Charge Voltage| Select the charge voltage for your Smart battery
Storage Voltage| Select the storage voltage for each cell
Battery History| Provides number of battery cycles, battery temp and
production date.
Fault Log| Provides a list of faults, including over-voltage, under-voltage or
over-temperature, and the date of exception.
Back| Return to the home screen
System Settings
Backlight | Low, Medium, High |
---|---|
Volume | Off, Low, Middle, High |
Completion Tone | Single or Repeat |
Touch Sensitivity | Low, High |
Language | Select language |
System Self-Checking | Initiates a charger self check. Do not connect a battery |
to the output port while self check is running.
System Information| View the charger’s firmware version
Back| Return to the home screen
Charger Errors
If the charger displays an error, follow the on-screen prompts to remedy the error. If necessary, disconnect the battery from the output and balance ports, disconnect the power supply, and restart the charger.
- Visit the S1100 G2 Smart Charger’s product page on www.horizonhobby.com for more information about the charger, firmware updates and optional accessories.
Limited Warranty
What this Warranty Covers – Horizon Hobby, LLC, (Horizon) warrants to the
original purchaser that the product purchased (the “Product”) will be free
from defects in materials and workmanship for a period of 1 year from the date
of purchase. What is Not Covered – This warranty is not transferable and does
not cover
(i) cosmetic damage,
(ii) damage due to acts of God, accident, misuse, abuse, negligence,
commercial use, or due to improper use, installation, operation or
maintenance,
(iii) modification of or to any part of the Product,
(iv) attempted service by anyone other than a Horizon Hobby authorized service
center,
(v) Product not purchased from an authorized Horizon dealer, or
(vi) Product not compliant with applicable technical regulations or
(vii) use that violates any applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR
REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER
ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY
MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy – Horizon’s sole obligation and purchaser’s sole and
exclusive remedy shall be that Horizon will, at its option, either (i)
service, or (ii) replace, any Product determined by Horizon to be defective.
Horizon reserves the right to inspect any and all Product(s) involved in a
warranty claim. Service or replacement decisions are at the sole discretion of
Horizon. Proof of purchase is required for all warranty claims. SERVICE OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND
EXCLUSIVE REMEDY.
Limitation of Liability – HORIZON SHALL NOT BE LIABLE FOR SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION
OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN
CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF
LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. Further, in no event shall the liability of Horizon exceed the
individual price of the Product on which liability is asserted. As Horizon has
no control over use, setup, final assembly, modification or misuse, no
liability shall be assumed nor accepted for any resulting damage or injury. By
the act of use, setup or assembly, the user accepts all resulting liability.
If you as the purchaser or user are not prepared to accept the liability
associated with the use of the Product, purchaser is advised to return the
Product immediately in new and unused condition to the place of purchase.
Law – These terms are governed by Illinois law (without regard to
conflict of law principals). This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state. Horizon
reserves the right to change or modify this warranty at any time without
notice.
WARRANTY SERVICES
Questions, Assistance, and Services – Your local hobby store and/or place
of purchase cannot provide warranty support or service. Once assembly, setup
or use of the Product has been started, you must contact your local
distributor or Horizon directly. This will enable Horizon to better answer
your questions and service you in the event that you may need any assistance.
For questions or assistance, please visit our website at
www.horizonhobby.com, submit a Product Support
Inquiry, or call the toll free telephone number referenced in the Warranty and
Service Contact Information section to speak with a Product Support
representative.
Inspection or Services – If this Product needs to be inspected or serviced and
is compliant in the country you live and use the Product in, please use the
Horizon Online Service Request submission process found on our website or call
Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the
Product securely using a shipping carton. Please note that original boxes may
be included, but are not designed to withstand the rigors of shipping without
additional protection. Ship via a carrier
that provides tracking and insurance for lost or damaged parcels, as Horizon
is not responsible for merchandise until it arrives and is accepted at our
facility. An Online Service Request is available at
http://www.horizonhobby.com/content/service-center_render-service-center. If
you do not have internet access, please contact Horizon Product Support to
obtain a RMA number along with instructions for submitting your product for
service. When calling Horizon, you will be asked to provide your complete
name, street address, email address and phone number where you can be reached
during business hours. When sending product into Horizon, please include your
RMA number, a list of the included items, and a brief summary of the problem.
A copy of your original sales receipt must be included for warranty
consideration. Be sure your name, address, and RMA number are clearly written
on the outside of the shipping carton.
NOTICE: Do not ship Li-Po batteries to Horizon. If you have any issue
with a Li-Po battery, please contact the appropriate Horizon Product Support
office.
Warranty Requirements – For Warranty consideration, you must include your
original sales receipt verifying the proof-of-purchase date. Provided warranty
conditions have been met, your Product will be serviced or replaced free of
charge. Service or replacement decisions are at the sole discretion of
Horizon.
Non-Warranty Service – Should your service not be covered by warranty,
service will be completed and payment will be required without notification or
estimate of the expense unless the expense exceeds 50% of the retail purchase
cost. By submitting the item for service you are agreeing to payment of the
service without notification. Service estimates are available upon request.
You must include this request with your item submitted for service. Non-
warranty service estimates will be billed a minimum of ½ hour of labor. In
addition you will be billed for return freight. Horizon accepts money orders
and cashier’s checks, as well as Visa, MasterCard, American Express, and
Discover cards. By submitting any item to Horizon for service, you are
agreeing to Horizon’s Terms and Conditions found on our website
http://www.horizonhobby.com/content/service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country
of use and ownership. If received, a non-compliant Product will not be
serviced. Further, the sender will be responsible for arranging return
shipment of the un-serviced Product, through a carrier of the sender’s choice
and at the sender’s expense. Horizon will hold non-compliant Product for a
period of 60 days from notification, after which it will be discarded.
Warranty and Service Contact Information
Country of Purchase| Horizon Hobby| Contact Information|
Address
---|---|---|---
United States of America| Horizon Service Center (Repairs and Repair
Requests)|
servicecenter.horizonhobby.com/RequestForm/|
2904 Research Road Champaign, Illinois, 61822 USA
Horizon Product Support (Product Technical Assistance)|
productsupport@horizonhobby.com
877-504-0233
Sales| websales@horizonhobby.com
800-338-4639
European Union| Horizon Technischer Service|
service@horizonhobby.eu| Hanskampring 9
D 22885 Barsbüttel, Germany
Sales: Horizon Hobby GmbH| +49 (0) 4121 2655 100
FCC Information
Supplier’s Declaration of Conformity S1100 G2 AC Smart Charger
(SPMXC2080)
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822
Email: compliance@horizonhobby.com
Web: HorizonHobby.com
IC Information
IC: CAN ICES-3 (B)/NMB-3(B)
This Class B digital apparatus complies with Canadian ICES-003.
Compliance Information for the European Union
EU Compliance Statement:
S1100 G2 AC Smart Charger (SPMXC2080);
Hereby, Horizon Hobby, LLC declares that the device is in compliance with the
following: EU Low Voltage
Directive 2014/35/EU; EU EMC Directive 2014/30/EU; RoHS 2
Directive 2011/65/EU; RoHS 3 Directive – Amending 2011/65/EU
Annex II 2015/863.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.horizonhobby.com/content/support-
render-compliance.
NOTE: This product contains batteries that are covered under the
2006/66/EC European Directive, which cannot be disposed of with normal
household waste. Please follow local regulations.
EU Manufacturer of Record:
Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822 USA
EU Importer of Record:
Horizon Hobby, GmbH
Hanskampring 9
22885 Barsbüttel Germany
WEEE NOTICE:
This appliance is labeled in accordance with European Directive 2012/19/EU
concerning waste of electrical and electronic equipment (WEEE). This label
indicates that this product should not be disposed of with household waste. It
should be deposited at an appropriate facility to enable recovery and
recycling.
© 2022 Horizon Hobby, LLC.
IC3, IC5, EC3, EC5, the Smart Technology logo and the Horizon Hobby logo
are trademarks or registered
trademarks of Horizon Hobby, LLC.
The Spektrum trademark is used with permission of Bachmann Industries,
Inc.
All other trademarks, service marks and logos are property of their
respective owners.
CN201721563463.4. Other patents pending.
Created 4/22
SPMXC2080
193997
Documents / Resources
|
Spectrum S1100 G2 AC Smart
Charger
[pdf] Instruction Manual
S1100 G2 AC Smart Charger, S1100, G2 AC Smart Charger, Smart Charger, Charger
---|---
References
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- Horizon Hobby Service Center
- RC Cars, RC Trucks, RC Airplanes, Model Trains, and Slot Cars at Tower Hobbies
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>