BRAUN 0128803002 CareStyle 3 Pro Steam Generator Iron User Manual

0128803002 CareStyle 3 Pro Steam Generator Iron
User Manual

© Copyright 2021. All rights reserved
De’Longhi Braun Household GmbH
Carl-Ulrich-Straße 4
63263 Neu-Isenburg/Germany

Please read the safety instructions (separate booklet) carefully and completely before using the appliance.

|
---|---

Before use

Please read the instructions carefully and completely before using the appliance.

Caution: Due to the high power of this appliance please make sure that your mains supply is sufficient. Please contact your local electric power company to make sure that the so-called main impedance is not higher than 0,266 Ohm.

Description

1. On/Off button
2. Clean system LED
3. Clean button
4. Mode button
5. Eco mode indicator
6. iCare mode indicator
7. Turbo button
8. Turbo mode indicator +
9. Iron rest
10. Lock system
11. Removable water tank
12. Power cord/Storage
13. Steam button
14. Temperature control LED
15. Heel rest
16. Cleaning vessel
17. Double cord/Storage

Intended use

The appliance must be used only for ironing garments that are suitable for ironing according to the care label. Never iron or dampen garments while wearing them.

Filling the water tank (for details refer to fi g. A)

Make sure the appliance is plugged off. You can refill the water tank at any time during use.
This appliance has been designed to be used with tap water. However, if you live in an area with hard water, we recommend that you use either distilled water or demineralized water to prolong the lifetime of the appliance. Do not use condensation water from a tumble dryer.

Start into Operation (for details refer to fi g. B)

Before starting ironing follows the garment care label instructions carefully. Fabrics with this symbol are not ironable.
For best ironing results, after ironing with steam, perform the last strokes without steam.

Before First use (for details refer to fig. B)

When steam is ready for the first time we recommend to iron for a few minutes over a rag to avoid manufacturing residues can dirty your garments.

Settings (for details refer to fig. C)

iCare
The iCare mode is automatically chosen when the appliance is switched on.
It is suggested for garments like wool, polyester and cotton/linen.
eco
It is suggested for most delicate garments like synthetics, silk and blended fabrics. This mode allows less power consumption.
turbo + (max. steam)
It is suggested for garments that need more powerful steam, like thick cotton/linen and jeans.
Note: The pump is activated each time you press the steam button. It produces some subtle rattling noise which might change from setting to setting.
This is normal.

Iron Auto-Off (for details refer to fig. D)

If this function is activated the mode LED corresponding to the chosen steam setting starts flashing.

Descaling (for details refer to fig. E)

The system will remind you to descale it regularly independent of the type of water used. Descaling can be performed at any time needed even when not indicated by the system.

If the clean LED (2) and the acoustic signal turn on during an ironing session, it is possible to continue ironing. There is no need to perform the cleaning immediately. The cleaning procedure can be performed when the ironing session has been finished or the next time the appliance is switched on.

If the appliance is switched off without having performed the cleaning process, the clean LED and acoustic signal will turn on again when it is next switched on. In case the steam emission is deactivated the cleaning procedure must be performed in order to proceed with steam ironing.
Caution: Do not leave the appliance unattended during the descaling process.

Always perform the descaling process with the cleaning vessel. Do not interrupt the process by lifting the iron up from the cleaning vessel, as hot water and steam will come out of the soleplate.
Caution: The cleaning vessel can be hot and contains hot water, take care while moving and emptying it.

Warranty and Service

For detailed information see the separate warranty and service leaflet or visit www.braunhousehold.com .

For UK Only
Guarantee Information

All Braun Household products carry a minimum guarantee period of two years. The rights and benefi ts under this guarantee are additional to your statutory rights which are not aff ected.

Please keep your receipt as this will form the basis of your guarantee.

In the unlikely event of a breakdown, you have access to professional help from our team simply by calling: 02392 392333
For service in the Republic of Ireland please call: 012475471

Braun Household undertakes within the specified period to repair or replace any part of the appliance, free of charge (with the exception of any glass or porcelain-ware  incorporated in the product) found to be defective provided that;

• We are promptly informed of the defect.
• The product is used and maintained in accordance with the User Instructions.
• The appliance has not been altered in any way or subjected to misuse or repair by a person other than an authorized service agent for Braun Household.
• No rights are given under this guarantee to a person acquiring the appliance second-hand or for commercial or communal use.
• Any repaired or replaced appliance will be guaranteed on these terms for the unexpired portion of the guarantee.
• The need for repair has not been caused by insuffi cient aftercare or cleaning: or damage caused by the chemical or electrochemical effects of water.
• Under no circumstances shall the application of this guarantee give rise to the complete replacement of the appliance or entitle the consumer to damages.

Braun Household, New Lane, Havant, Hampshire PO9 2NH

www.braunhousehold.co.uk
Thank You for choosing Braun. We are confi dent that you will get excellent service from this product.

TO IMPROVE YOUR EXPERIENCE
Register now at www.braunhousehold.co.uk
By registering we may send you from time to time details on exclusive off ers, promotions, recipes, and inside tips.

Troubleshooting guide

steam comes out. It may take up to 30 seconds until steam comes out
There is not enough water in the water tank| Fill the water tank
If the clean system LED turns on, the steam function has been disabled until you have performed the cleaning process| Perform the cleaning process ( see dedicated chapter)
The iron is heating up| When the temperature control LED is flashing, the iron is heating up;
during this phase the steam function is disabled. Wait until the temperature control LED turns permanently on.
The appliance has been switched off| The auto-off mode is activated automatically when there has been no steam emission for more than 20 minutes| Press the On/Off button to re-activate
During steam emission, the system produces a pumping noise associated
with vibrations| If the water tank is full – this is a normal working condition| No action required
The water tank is empty| Switch off the system, unplug and fill the water tank. Press the steam button until! the steam comes out.
Water droplets come out of the soleplate| The steam condenses into water in the hose when you use steam for the first  time or have not used it for a long time| This is normal. Hold the iron away from the garment and press the steam button. Wait until steam instead of water comes out of the soleplate
During ironing
white particles
and impurities are coming out from the soleplate| Your tap water is very hard| If your tap water is hard we recommend you use either distilled water or demineralized water
Impurities of chemicals present in the water have deposited in the steam vents and/or soleplate| Perform the cleaning process regularly even if not required by the system
Water flushes out of the soleplate| The cleaning process has been activated accidentally.| Switch off the appliance and unplug it. Put the iron on the cleaning vessel,
on and perform the cleaning process completely ( see dedicated chapter)
The first time the appliance is turned on, you notice smoke/smell| Some parts have been treated with sealer/lubricant which evaporates the first time the iron heats up| This is normal and will stop after the iron has been used a few times. If the smoke/smell is still present after turning off and cooling down, contact
an authorized Braun Customer Service
All Leds are flashing| System error| Unplug the system, and plug it in again. If the problem is still present unplug immediately and contact an authorized Braun Customer Service

References

• Braun UK | Braun Kitchen & Home Appliances
• Braun US | Home
• Product Registration | Braun AU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>