Nasta Indoor Ventilation Passive Air Register with Pollen Filter Instruction Manual
- June 3, 2024
- NASTA
Table of Contents
Nasta Indoor Ventilation Passive Air Register with Pollen Filter
Indoor ventilation
Please read carefully before the installation
Nasta KS-86PR001FK
Body dimensions: 200mm square Compatible with 150mm duct
Features
- Wind direction control
- Freely change the orientation of the surface cover for comfort, and to protect against dust on curtains or furniture
- Air volume adjustment
- By rotating the disk on the back side of the front cover, the air volume can be adjusted between Sealed, 1, or 2
- Seal can be used to protect against strong/harsh winds, or when ventilation is not required – not for typical use
Parts List
Changing the orientation
Depending on the environment (walls, ceilings, curtains, furniture etc.) the
direction of the openings can be changed by removing and replacing the cover
of the register.
Adjusting the volume
The disc on the back of the cover allows you to control the amount of air allowed into the room:
- S Sealed
- 1 Level 1 – half
- 2 Level 2 – full
Care Instructions
How to clean the cover and body cover:
- Wipe off any dirt and dust with a soft cloth, and a neutral detergent (if required)
- Do NOT use turpentine, benzine, acids, or alkaline cleaners such as bleach
How to care for and replace the filter:
- Remove dust, and wash with water once every 3 months
- Replace every 6 months or as required
Cleaning and maintenance
- Remove the cover
- Remove the filter cartridge by pinching the arms of cartridge, rotating counter-clockwise, and pull gently
- To replace, reverse the process ensuring the water guard is at the bottom
Removing and installing the cover
- Push in the two opposite open sides of the cover
- Pull lightly away from the body To reattach the cover, perform these actions in reverse
Removing and installing the filter
The filter can be removed by lifting the clips on the top and bottom of the filter frame
Insert the filter into the back of the filter cartridge, with the firmer side facing the room Insert the filter frame into the cartridge
Manufactured by
Nasta Co, Ltd
Please note that the product design and specifications are subject to change without notice