057.089.5 Brewferm Brewer 25 l User Guide

: June 4, 2024
: BREWFERM

Table of Contents

057.089.5 Brewferm Brewer 25
Before use
Safety instructions
Operating the Brewferm electric kettle
Cleaning and maintenance
Contact US
- VISIT US ONLINE:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

057.089.5 Brewferm Brewer 25

057.089.5 Brewferm Brewer 25 l

Before use

Please read the instructions carefully. They hold important information for use, safety and maintenance of the appliance. Keep the instructions in a safe place so you can refer to them later. Use this appliance only for its intended purpose as defined in these operating instructions. Follow the safety instructions when using the appliance.

Safety instructions

Unwind the mains cable completely. Connect the appliance only to a safe alternating current socket with a voltage in accordance with the indications on the label. The mains cable and plug must be dry. Only plug in the cable when the kettle is in use. Do not switch the appliance on when there is no water inside.
After use, store the machine in a dry place.
Never pull the mains cable over sharp edges, do not bend it and do not allow the cable to hang over the edge of a table or touch hot surfaces; protect it from heat. Pull the plug, not the cable to unplug the kettle. Do not use the cable to lift or move the appliance.
Only use extension cables that are in perfect condition and designed for at least 10 A.
Always make sure your hands are dry when you unplug the appliance .
Unplug and stop using the appliance immediately if:
- the appliance or mains cable are damaged;
- the appliance is leaking;
- there is cause for concern that it may be damaged;
- the appliance is malfunctioning during operation.
  Have the appliance repaired in these cases.
Place the appliance on a solid and stable base, away from hot surfaces such as a stove top,
hot plate or an open flame.
This kettle is equipped with a minimum and maximum fill level indicator. Do not exceed the maximum level. Otherwise there is danger of burns during cooking.
Caution: The appliance gets hot. Danger of scald burns due to hot steam escaping. Do not move the kettle while using it. Beware of hot steam and condensation when opening the lid.
Children are unaware of the dangers that can be caused by electrical appliances. Always keep an eye on the appliance while using it and keep/ store it out of the reach of children.
Never immerse the appliance in water.
The kettle is equipped with boil-dry protection; it will disable itself automatically once the water has run out during use.
After using the appliance pull the plug from the socket and let the appliance cool down. Let the condensation water fall back into the kettle when removing the lid.
Don’t move the kettle when it is filled completely, as it is very heavy. Use the ball valve to drain the water before transporting it.
We do not assume any liability for damages caused by misuse, handling errors or unprofessional repair. Any warranty is excluded in such cases. The appliance is not suitable for industrial use.

Operating the Brewferm electric kettle

Turn the thermostat of the Brewferm brew kettle clockwise to select the desired temperature between 30 °C [ON] and 100 °C or switch it to the max. position to select continuous heating.
The indicator light will light up when the heating element is switched on.
Before use, make sure the thermostat is in the ‘OFF’ position. Then fill the kettle and plug in the mains cable. Next, turn the thermostat up to the desired temperature. The heating element will be switched on until the desired temperature is reached, then the kettle will maintain this temperature.

Continuous heating – achieving a rolling boil To achieve a rolling boil continuous heating can be applied by selecting the max. position with the thermostat.
First use
Clean the kettle and lid thoroughly before using it for the first time. You can use Chemipro® Wash for this.

Cleaning and maintenance

It is very important to clean the kettle after use. The dry ingredients may stick to the metal.
Rinse the machine and soak it with 5 – 10 litres of water of 60 °C for 15 minutes or more. We advise the use of Chemipro® Wash. Follow the instructions on the label of the cleaning product.
Do not use any sharp metal utensil to remove any residue. Use a soft cloth or soft scouring pad to clean the inside of the kettle. (Tip: Vinegar can be helpful.)
Any wort residue marks on the boiler base should be wiped off before next use.
Do not splash any electronic parts of the machine.

Brewing tips
During mashing you will be heating a heterogeneous mixture of water and malt. Therefore, it is necessary to stir frequently for even heating. The temperature sensor is placed at the bottom of the kettle, we recommend checking the temperature with a thermometer at several places throughout the mash. It is recommended that only 1 of the 2 wattage knobs be turned on during mashing to prevent burning. It is best to use both elements for cooking.
Do not use the ball valve to drain the mash, as it will become clogged. Only use the ball valve for uncharged liquids (e.g. water, wort…).
To avoid danger, have the appliance repaired or a damaged mains cable replaced by the manufacturer, their customer service or any other respectively qualified person only.
Repairs covered by the warranty shall only be carried out by the manufacturer. 2 year warranty on manufacturing defects. The appliance is in accordance with the EU-Directives no. 2006/23/CE and no. 2004/108. Subject to technical alterations. Dispose of packaging material in a proper manner.