HIhome WAL-RGBCCT14 Smart WiFi Lamp User Guide
- June 9, 2024
- HIHOME
Table of Contents
HIhome WAL-RGBCCT14 Smart WiFi Lamp
Safety information
This product is designed for indoor use. Keep away from moist and damp environment.
Read the manual carefully. Hihome (At Home Technologies BV) is not liable and responsible when used incorrectly. Do not connect to devices without a fuse.
INSTRUCTION
- Download the Hihome App for iOS of Android
- Register and log in
- Add device and choose Lighting Devices
- Mount Smart WiFi lamp in de socket (E27/E14)
- When powered on, the bulb starts to blink rapidly
- When the bulb is not blinking, start the Connection mode
- Activate the pairing mode by switching off and on the bulb for 3 times
- After 3 times switching off and on, the bulb starts to blink rapidly
- The bulb is ready to connect…
- Connect to your home WiFi (2.4Ghz only)
- Operate and setup the bulb using the Hihome App
Attention
The Hihome Smart WiFi bulbs are dimmable via the Hihome App or Google Assistant or Alexa. Do not use a conventional dimmer because it lowers the power and possibly deactivates the WiFi module.The bulb will then not respond until the power is set to the maximum again.
More details, connect with Google Home or Alexa..
- For instructions how to connect the Hihome Smart Bulb with Google Home , please see:
- For instructions how to connect the Hihome Smart Bulb with Amazon Alexa , please see:
For detailed descriptions and manuals: Go to: https://support.hihome.eu
Hereby, At Home Technologies BV, declares that the Hihome Smart WiFi Lamps WAL-RGBCCT27 and WAL-RGBCCT14 are in compliance with the essential requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available on the productpage on www.hihome.eu. Further manuals, FAQ and instructions can be found on https://support.hihome.eu