LILYGO ESP32 T-Display-S3 Development Board User Guide
- June 3, 2024
- LILYGO
Table of Contents
LILYGO ESP32 T-Display-S3 Development Board
Introduction
T-Display-S3
T-Display-S3 is a development board. It can work independently.
It consists of ESP32-S3 MCU supporting Wi-Fi + BLE communication protocol and
motherboard PCB. The screen is 1.9 inch IPS LCD ST7789V.
At the core of this module is the ESP32S3R8 chip.
ESP32-S3 integrates Wi-Fi (2.4 GHz band) and Bluetooth 5.0(LE) solutions on a
single chip, along with dual high performance cores and many other versatile
peripherals. Powered
by 40 nm technology, ESP32-S3 provides a robust, highly integrated platform to
meet the continuous demands for efficient power usage, compact design,
security, high performance, and reliability.
Xinyuan provides the basic hardware and software resources that empowers
application developers to build their ideas around the ESP32-S3 series
hardware. The software development framework provided by Xinyuan is intended
for rapidly developing Internet-of-Things (IoT) applications, with Wi-Fi,
Bluetooth, flexible power management and other advanced system features.
The RF frequency range is 2.412 GHz to 2.4 GHz. (WIFI)72 BLE: 2402-2480MHz
The T-Display-S3 manufacturer is Shenzhen Xin Yuan Electronic Technology Co.,
Ltd.
Arduino
A set of cross-platform applications written in Java. The Arduino Software IDE is derived from the Processing programming language and the integrated development environment of the Wiring program. Users can develop applications in Windows/Linux/MacOS based on Arduino. It is recommended to use Windows 10. Windows OS has been used as an example in this document for illustration purposes.
Preparation
To develop applications for ESP32-S3 you need:
- PC loaded with either Windows, Linux or Mac operating system
- Toolchain to build the Application for ESP32-S3
- Arduino that essentially contains API for ESP32-S3 and scripts to operate the Toolchain
- The ESP32-S3 board itself and a USB cable to connect it to the PC
Get Started
Download the Arduino Software
The quickest how to install the Arduino Software (IDE) on Windows machines
Quick Start Guide
The website provides a quick start tutorial
-
Mac OS X:
https://www.arduino.cc/en/Guide/MacOSX
Installation steps for Windows platform Arduino
Install the Arduino Software
Configure
Download Git
Download the installation package Git.exe
Pre-build configuration
Click Arduino icon, then right click and select “Open folder where
“ Select hardware ->
Mouse Right click ->
Click Git Bash Here
Cloning a remote repository
$ mkdir espressif
$ cd espressif
$ git clone –recursive https://github.com/espressif/arduino-esp32.gitesp32
Connect
You are almost there. To be able to proceed further, connect ESP32-S3 board to PC, check under what serial port the board is visible and verify if serial communication works.
Test Demo
Select File>>Example>>WiFi>>WiFiScan
**Upload Sketch
**
Select Board
Tools<<Board<<ESP32S3 Dev Module
Upload
Sketch -> Upload
Serial Monitor
Tools ->Serial Monitor
SSC Command Reference
Here lists some common Wi-Fi commands for you to test the module.
Description
op commands are used to set and query the Wi-Fi mode of the system. Example
- op -Q
- op -S -o wmode
Parameter
Table 6-1. op Command Parameter
sta
Description
sta commands are used to scan the STA network interface, connect or disconnect
AP, and query the connecting status of STA network interface.
Example
- sta -S [-s ssid] [-b bssid] [-n channel] [-h] sta -Q
- sta -C [-s ssid] [-p password]
- sta -D
Parameter
Table 6-2. sta Command Parameter
ap
Description
ap commands are used to set the parameter of AP network interface.
Example
ap -S [-s ssid] [-p password] [-t encrypt] [-n channel] [-h] [-m max_sta] ap
–Q
ap –L
Parameter
Table 6-3. ap Command Parameter
mac
Description
mac commands are used to query the MAC address of the network interface.
Example
- mac -Q [-o mode]
Parameter
Table 6-4. mac Command Parameter
dhcp
Description
dhcp commands are used to enable or disable dhcp server/client.
Example
dchp -S [-o mode] dhcp -E [-o mode] dhcp -Q [-o mode]
Parameter
Table 6-5. dhcp Command Parameter
ip
Description
ip command are used to set and query the IP address of the network interface.
Example
- ip -Q [-o mode]
- ip -S [-i ip] [-o mode] [-m mask] [-g gateway]
Parameter
Table 6-6. ip Command Parameter
reboot
Description
reboot command is used to reboot the board.
Example
- reboot
ram
ram command is used to query the size of the remaining heap in the system.
Example
- ram
FCC Caution
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
References
- GitHub - espressif/arduino-esp32: Arduino core for the ESP32
- arduino.cc/en/Guide/Linux
- arduino.cc/en/Guide/MacOSX
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>