FISHER AND PAYKEL HP24ILTX1 24 Inch Integrated Insert Range Hood User Guide
- September 17, 2024
- FISHER and PAYKEL
Table of Contents
FISHER AND PAYKEL HP24ILTX1 24 Inch Integrated Insert Range Hood
Introduction
With edge-to-edge extraction, this efficient, stylish range hood is perfectly hidden away in your cabinetry.
- With four fan speeds, select the perfect extraction rate for your cooking
- Perimeter extraction creates a stylish look with efficient removal of steam and odors
- Powerful 600CFM maximum air flow
DIMENSIONS
- Height 13 3/4 “
- Width 20 7/8 “
- Depth 11 ”
FEATURES & BENEFITS
Quiet And Effective
This vent hood features four fan speeds providing powerful extraction to quickly remove odours and steam. As odors can linger in the kitchen well after cooking is finished, the timer keeps the vent hood working for up to 15 minutes before automatically turning of.
Simple Controls
This Fisher & Paykel vent hood features a sleek and easy to use soft-touch control panel. Lights provide superb illumination over the entire cooking surface.
Easy Cleaning
The stainless steel finish is easily wiped clean. Multi-layered, dishwasher safe filters trap grease effectively and can easily be removed for cleaning.
Complementary Design
This vent hood can be built into your cabinetry for a seamless look. Its stainless steel finish is designed to match the rest of Fisher & Paykel’s kitchen appliance family.
SPECIFICATIONS
Accessories (sold separately)
Light bulb| 791961
Fan ratings
Maximum air movement| 600 CFM
Installation and cleaning
Air outlet size| 6 “
Dishwasher safe flters| 2
Ducted| Top extraction
Performance
Extraction type| Perimeter
Fan speeds| 4
Filter type| Mesh
Number of flters| 2
Power requirements
Lighting power| 50 W
Motor power| 530 W
Supply frequency| 60 Hz
Supply voltage| 120 V
Total Power| 630 W
Product dimensions
Depth| 11 “
Height| 13 3/4 “
Width| 20 7/8 “
Product information
Control type| soft-touch button
Ventilation features
Light type| LED
Timer function| •
SKU| 50085
The product dimensions and specifications in this page apply to the specifc product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. © Fisher & Paykel Appliances Ltd 2020.
Other product downloads available at fsherpaykel.com
2D-DWG Insert Range
Hood
2D-DXF Insert Range
Hood
Archicad Insert Range
Hood
Data Sheet Insert Range
Hood
Service &
Warranty
Revit Insert Range
Hood
Rhino Insert Range
Hood
Sketchup Insert Range
Hood
Where applicable:
All appliances use energy, and energy usage typically generates carbon
emissions. Fisher & Paykel Appliances’ In-use Energy Carbon Emissions Estimate
indicates carbon emissions from a product’s in-use energy. This is calculated
either annually or per cycle, using the product’s market-specifc energy label
energy consumption data multiplied by the carbon emissions factor for energy
in your country or region.
Our In-use Energy Carbon Emissions Estimate is designed to assist customers in
making informed purchasing decisions when comparing different Fisher & Paykel
products. For example, a heat pump dryer typically has a lower In-use Energy
Carbon Emissions Estimate than a vented dryer.
Customer Support
A PEACE OF MIND SALE
24 Hours 7 Days a Week Customer Support
T 1.888.936.7872 W www.fsherpaykel.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>