MODULARO PA-5546 Pavillon Betty 18.0 m2 Instruction Manual
- June 4, 2024
- MODULARO
Table of Contents
MODULARO PA-5546 Pavillon Betty 18.0 m2
General information
Dear client,
We are glad that you have decided in favour of our pavilion!
Please read the assembly manual carefully before proceeding with installation
of the pavilion! You will thus avoid problems and will not waste time.
Recommendations:
- Keep the pavilion package until its complete assembly in a dry place, but not in direct contact with the ground, protected from weather conditions (moisture, the sun, etc.). Do not keep the pavilion package in a heated room!
- When selecting the pavilion location, make sure that the pavilion will not be subjected to extreme weather conditions (areas of strong snowfall or winds).
Warranty
Your pavilion is made from high quality fir and delivered in the natural
(unprocessed) form. If, despite our thorough inspection, you should have
complaints, please submit the filled out control sheet and purchase invoice to
the product seller.
ATTENTION: Please be sure to keep the documentation accompanying the
house package! The control sheet includes the control number of the pavilion.
We can only review complaints if you submit the control number of the pavilion
to the seller!
The warranty does not cover:
- Peculiarities of wood as a natural material
- Wooden details already painted (processed with a wood preservative)
- Wooden details containing whole branches that do not endanger the stability of the pavilion
- Colour tone variations caused by wood structure differences that do not influence wood lifetime
- Wooden details containing (caused by drying) small cracks/gaps that do not pass through and do not influence the structure of the pavilion
- Twisted wooden details if they can nevertheless be installed
- Roof boards that may have on their concealed surfaces some non-planed areas, colour differences and waning
- Complaints resulting from an incompetent manner of the installation of the pavilion or the pavilion subsiding due to an incompetently made foundation
- Complaints caused by introducing self-initiative changes to the pavilion, such as the deformation of wooden details due to an incompetent manner of wood processing
The complaints covered by the warranty are satisfied to the extent of replacing the deficient/faulty material. All other demands will be excluded!
Painting and maintenance
Wood is a natural material, growing and adapting depending on weather
conditions. Large and small cracks, colour tone differences and changes, as
well as a changing structure of wood are not errors, but a result of wood
growing and a peculiarity of wood as a natural material.
Unprocessed wood (except for foundation joists) becomes greyish after having
been left untouched for a while, and can be turn blue and become mouldy. To
protect the wooden details of your pavilion, you must immediately process them
with a wood preservative.
We recommend that you cover your pavilion in advance with a colourless wood
impregnation agent. Only this will prevent moisture penetration.
After the pavilion assembly is completed, we recommend for the conclusive
finishing a weather protection paint that will protect wood from moisture and
UV radiation.
When painting, use high quality tools and paints, follow the paint application
manual and manufacturer’s safety and usage instructions. Never paint a surface
in strong sunlight or rainy weather. Consult a specialist regarding paints
suitable for unprocessed softwood and follow the paint manufacturer’s
instructions.
Having been properly painted, your pavilion’s lifetime will increase
substantially. We recommend that you inspect the pavilion thoroughly once
every six months.
Preparation for assembly
Tools and preparation of components
To assemble the pavilion, you will need the following tools:
ADVICE: To avoid splinters, we recommend that you wear the corresponding protective gloves during the assembly process.
SPECIFICATION
Pos No.| Height [mm]| Width [mm]| Length [mm]| Amount
[pc]| Description| Information
---|---|---|---|---|---|---
001| 120| 120| 2100| 8| Post|
002| 090| 090| 592| 8| Diagonal|
003| 090| 090| 592| 8| Diagonal|
004| 120| 120| 2169| 8| Top frame|
005| 160| 080| 3107| 8| Rafter|
006| 140| 070| 1918| 8| Rafter|
007| 140| 070| 1918| 8| Rafter|
008| 193| 193| 225| 1| Connection part|
009| 019| 114| 120| 8| Roof board|
010| 019| 114| 206| 8| Roof board|
011| 019| 114| 292| 8| Roof board|
012| 019| 114| 377| 8| Roof board|
013| 019| 114| 463| 8| Roof board|
014| 019| 114| 548| 8| Roof board|
015| 019| 114| 634| 8| Roof board|
016| 019| 114| 719| 8| Roof board|
017| 019| 114| 805| 8| Roof board|
018| 019| 114| 891| 8| Roof board|
019| 019| 114| 976| 8| Roof board|
020| 019| 114| 1062| 8| Roof board|
021| 019| 114| 1147| 8| Roof board|
022| 019| 114| 1233| 8| Roof board|
023| 019| 114| 1319| 8| Roof board|
024| 019| 114| 1404| 8| Roof board|
025| 019| 114| 1490| 8| Roof board|
026| 019| 114| 1575| 8| Roof board|
027| 019| 114| 1661| 8| Roof board|
028| 019| 114| 1747| 8| Roof board|
029| 019| 114| 1832| 8| Roof board|
030| 019| 114| 1918| 8| Roof board|
Pos No.| Height [mm]| Width [mm]| Length [mm]| Amount
[pc]| Description| Information
---|---|---|---|---|---|---
031| 019| 114| 2003| 8| Roof board|
032| 019| 114| 2089| 8| Roof board|
033| 019| 114| 2175| 8| Roof board|
034| 019| 114| 2260| 8| Roof board|
035| 120| 019| 2280| 8| Eave edging|
036-038| 090| 800| 1794| 7| Railing|
| | | | | |
055| Æ35| | 240| 8| Dowel|
| | | | | |
F1| Æ8×160| | | 32| Hexagon head screw| For-Für-Pour-Per-Para Pos. 005
F2| Æ8×120| | | 32| Hexagon head screw-| For-Für-Pour-Per-Para Pos. 002-003
F3| Æ8×80| | | 8| Hexagon head screw| For-Für-Pour-Per-Para Pos. F6
F4| Æ8×50| | | 48| Hexagon head screw| For-Für-Pour-Per-Para Pos. F6
F5| Æ8×20| | | 64| Washer| For-Für-Pour-Per-Para Pos. F1-F4
F6| 120x120x60| | | 8| U-shoe| For-Für-Pour-Per-Para Pos. 001
F7| 20x20x40| | | 28| L-iron| For-Für-Pour-Per-Para Pos. 036-038
F8| 6×120| | | 18| Screw| For-Für-Pour-Per-Para Pos. 039-041; 004
F9| 4.5×70| | | 32| Screw| For-Für-Pour-Per-Para Pos. 006-007
F10| 4.5×50| | | 32| Screw| For-Für-Pour-Per-Para Pos. 035
F11| 3.5×35| | | 120| Screw| For-Für-Pour-Per-Para Pos. F7; F14
F12| 2.5×50| | | 700| Nail| For-Für-Pour-Per-Para Pos. 009-034
F14| 8-side| | | 1| Roof cap|
F15| Æ20| | | 32| Hole plug|