IXON IXrouter Seamlessly integrated User Guide

IXON IX router Seamlessly integrated

Create your account

Get started with the IX router by creating an account on the IXON Cloud. Set up your own IIoT user and company account by visiting portal.ixon.cloud

Get config

Easily create the configuration file for your IX router from your own IIoT account. Go to the IXON Cloud Fleet Manager app. Expand the main menu, and select [Tools], then start the self-explaining wizard. Save the downloaded file to a USB flash drive (included) using the exact filename router. conf.

Connect

No matter your situation, you can always connect your machine to the cloud. The IX router provides wired (Ethernet), 4G or Wi-Fi connectivity options. Registration starts immediately upon inserting the USB flash drive. Once the ACT led status is steady blue, the IX router is connected to the IXON Cloud and will automatically show up in your company account.

| Only insert the SIM card when the IX router is turned off
---|---

Ready. Set. Go!

You’ve now successfully installed your IX router. The IX router is designed for and seamlessly integrated with the IXON Cloud. Any further configuration can be handled from your own IIoT account. The IXON Cloud offers a multitude of services. Deliver remote service, monitor your machine, set up alerts, and create high-end data reports. It’s all at your fingertips in your own customer portal.

Find out more about IXON’s solution and its endless possibilities on www.ixon.cloud.

Troubleshooting Front Panel LEDs

or SSID may be incorrect)
Blinking Red 1 pulse| No reception or unable to connect to network (APN or SSID may be incorrect)
Blinking Red 2 pulses| PIN invalid or PUK required
Blinking Red 4 pulses| SIM card is invalid or missing
ACT| Constant Blue| Successfully connected to the IXON Cloud
Blinking Blue 1 pulse| Connecting to the IXON Cloud
Blinking Blue 2 pulse| Initiating VPN connection
Constant Red| Booting up (may take 1 min) or not yet registered
Blinking Red 1 pulse| Waiting for internet access
Blinking Red 3 pulses| LAN/WAN conflict (conflicting subnets)
Blinking Red 4 pulses| Removed from the IXON Cloud (re-insert USB flash drive to register again)
Blinking Red 5 pulses| Previously registered to the IXON Cloud (remove from the IXON Cloud and register again)

Additional Help and Support

For additional product support, specifications, a detailed user manual and installation tips go to support.ixon.cloud. For direct technical support and questions, get in touch with our Technical Support team via [email protected] or +31 (0)85 – 744 1105.

Connectivity specifications

LTE: B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18 B19/ B20/ B25/ B26/ B28/ B38/ B39/ B40/ B41
WCDMA: B1/ B2/ B4/ B5/ B6/ B8/ B19 GSM: B2/ B3/ B5/ B8
IX2410| 802.11b/g/n
Client + AP mode|
IX2415| 802.11b/g/n
Client + AP mode| Region: Worldwide
LTE: B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18 B19/ B20/ B25/ B26/ B28/ B38/ B39/ B40/ B41
WCDMA: B1/ B2/ B4/ B5/ B6/ B8/ B19 GSM: B2/ B3/ B5/ B8

All models can connect via a wired connection (Ethernet cable)

General Specifications

Certifications
Warranty| Two years
IXON Cloud| Lifetime access included

Warning

The IXrouter allows the user to remotely connect to industrial control equipment via Ethernet, Wi-Fi, and cellular network connections. The remote user may fully operate and monitor the local control system and affect the function and control of the application similar to a local operator. Proper Control, Security and Safety Procedures should be considered and implemented when utilizing the remote access feature

Wi-Fi and 4G models

The antenna used with this transmitter must be installed with a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antennas or transmitters. Only an antenna tested with the wireless transmitter or a similar antenna with equal or lesser gain may be used. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

www.ixon.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>