MotoLogic W701542 Electronic Engine Controls Owner’s Manual
- June 3, 2024
- Motologic
Table of Contents
W701542 Electronic Engine Controls
Owner’s Manual
W701542 Electronic Engine Controls
Report a problem with this article
| SECTION 303-14: Electronic Engine Controls | 2008 Edge/MKX Workshop Manual |
|---|---|
| REMOVAL AND INSTALLATION | Procedure revision date: 09/14/2007 |
Crankshaft Position (CKP) Sensor
| Item | Part Number | Description |
|---|---|---|
| 1 | W701542 | Heat shield nut |
| 2 | W701669 | Heat shield bolt |
| 3 | 6K342 | Heat shield |
| 4 | 6C070 | Rubber grommet cover |
| 5 | 14A464 | Crankshaft Position (CKP) sensor electrical connector |
| 6 | 6D327 | CKP sensor bolt |
| 7 | 6C315 | CKP sensor |
Removal and Installation
-
With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
-
Remove the LH catalytic converter. For additional information, refer to Section 309-00.
-
Remove the bolt, nut and the heat shield.
• To install, tighten to 10 Nm (89 lb-in). -
Remove the rubber grommet cover.
-
Disconnect the Crankshaft Position (CKP) sensor electrical connector.
-
Remove the bolt and the CKP sensor.
• To install, tighten to 10 Nm (89 lb-in). -
To install, reverse the removal procedure.
2008 Lincoln MKX • MotoLogic
https://www.motologic.com/car/
11/22/22, 1:27 PM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>