Bestway 67226 Built In Foot Pump Air Bed Instructions

: June 3, 2024
: Bestway

Table of Contents

Bestway 67226 Built In Foot Pump Air Bed
PREPARATION
INFLATION
CLEANING & STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bestway 67226 Built In Foot Pump Air Bed

Bestway-67226-Built-In-Foot-Pump-Air-PRODUCT

PREPARATION

Unroll the bed onto a flat area free from objects and debris. The Flocked side should be facing up and the PVC side should be on the ground.

NOTE: Please read instructions carefully before using this airbed.

Item No.	67223; 67224	67225; 67226
Max load	****

150kg/330lbs

| 300kg/661lbs

Bestway has two ways for you to inflate the airbed.

INFLATION

Built-in Foot Pump
Locate the foot pump and remove the white rubber plug from the suction port. Depress the foot pump area to inflate the bed. Be sure to depress the pump straight down. Your foot should completely cover the suction port while depressing the foot pump, this will keep the air from escaping the inflation chamber back through the suction port. Lift your foot completely off of the hole in order to have the suction port refill the chamber. Continue until the bed reaches to proper firmness and most of wrinkles are gone. Insert the white rubber plug back into the suction port and screw on the plastic cover. The airbed is ready for use. (FIG 1)

Air pump
Open the valve; inflate the bed with an air pump and close the valve once inflated. (FIG 2)

NOTE: Air pump is not included.
After use, airbed may require additional air to increase firmness, add air according to your desired firmness.

DEFLATION
Open the valve to deflate. Bestway-67226-Built-In-Foot-Pump-Air-
FIG-1

DISPOSAL

If the product is out of service, please cut it and dispose according to your local council.
Dispose the package carefully and thoughtfully. Do not litter. To be a good citizen and dispose of litter in an environmentally manner.

REPAIRING
If the airbed surface is damaged, use the provided repair patch.

To repair

1. Completely deflate the airbed.
2. Clean and dry the damaged area.
3. Apply a repair patch and smooth out any air bubbles.

NOTE: Never use other liquid glue or adhesive fabric, only use the repair patch like the provided one.

CLEANING & STORAGE

If the airbed is dirty, use a clean damp cloth and gently wipe down the surface. Be sure to dry the airbed before storing.Check the product for damage at the beginning of each season and at regular intervals when in use.
NOTE: Do not use harsh detergents that may damage the airbed.
Once deflated, carefully fold the airbed and store in a cool, dry location away from chemicals and heavy, or sharp objects.

Trademarks used in some countries under license from: Bestway Inflatables & Material Corp., Shanghai, China
Manufactured, distributed and represented in the European Union by: Bestway (USA) Inc., 3411 E. Harbour Drive, Phoenix, Arizona 85034, United States of America
Tel: +86 21 69135588 (For U.S. and Canada)
Distributed in Latin America by: Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile
Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia
Tel: Australia: (+61) 29 0371 388; New Zealand: 0800 142 101
Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL
Exported by: Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited
Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong
www.bestwaycorp.com