FS AC-1004 Enterprise Wireless LAN Controller User Guide

: June 3, 2024
: FS

FS AC-1004 Enterprise Wireless LAN Controller

Introduction

Thank you for choosing the enterprise wireless LAN controller. This guide is designed to familiarize you with the layout of the wireless LAN controller and describes how to deploy it in your network.

Accessories

Power Adapter xl
Power Cord x1
Screw Anchor x2
Rubber Pad x4
Screw x2

Hardware Overview

Front Panel Ports

Ports	Description
POWER	53.SV DC power port
WAN	Wide Area Network interface
LAN1-4 (RJ45)	First Local Area Network interface
CONSOLE	An RJ45 console port for serial management
USB	A USB management port for software and configuration backup and

offline software upgrade

Front Panel Button

Bouton	Description
RESET	Press it for more than 3s: Restore to Factory Default Settings. Press

it for less than 3s: Restart the controller.

Front Panel LEDs

LEDs	State	Description

SYS

Back Panel

Installation Requirements

**Before you begin the installation, make sure that you have the

followings:**

Phillips screwdriver.
Standard-sized, 19″ wide rack with a minimum of 1 U height available.
Category Se or higher RJ-45 Ethernet cables and fiber optical cables for connecting network devices.

Site Environment

Make sure the installation site is dry and flat.
Keep the controller far away from the heat source.
Ensure that the controller is properly grounded.
Wear an anti-static wrist strap during installation and maintenance.
Keep the controller and installation tools away from walkways.
Use UPS (Uninterruptible Power Supply) to prevent power failure and other interference.

Mounting the Wireless LAN Controller

Desk Mounting

Attach four rubber pads to the bottom.
Place the controller on a desk.

Grounding the Controller

Connect one end of the grounding cable to a proper earth ground, such as the rack in which the controller is mounted.
Secure the grounding lug to the grounding point on the controller back panel with the washers and the screw.

Connecting the Power

Plug the AC power cord into the power port on the back panel.
Connect the other end of the power cord to an AC power source.

Connecting the Console Port

Insert the RJ45 connector into the RJ45 console port on the front panel.
Connect the D89 female connector of the console cable to the RS-232 serial port on the computer.

Connecting the RJ45 Ports

Connect an Ethernet cable to the RJ45 port of a computer or other network devices.
Connect the other end of the Ethernet cable to the RJ45 port of the controller.

Configuring the Wireless LAN Controller

Configuring the Controller Using the Console Port

Step 1: Connect a computer to the controller’s console port using the supplied console cable.
Step 2: Start the terminal simulation software such as HyperTerminal on the computer.
Step 3: Set the parameters of the HyperTerminal: Baud rate to 9600, Data bits to 8, Parity to None,
Stop bits to 1.

Step 4: After setting the parameters, click Connect to enter.

Troubleshooting

The Screen Displays Request Timed Out

Check if the network cable is intact.
Check if the hardware connection is correct.
The system state LED on the device panel and the NIC LED on the computer must be lit.
The computer’s IP address setting is correct.

Online Resources

Downloadhttps://www.fs.com/products_support.html
Help Centerhttps://www.fs.com/service/fs_support.html
Contact Ushttps://www.fs.com/contact_us.html

Product Warranty

FS ensures our customers that if there are any damage or faulty items due to our workmanship, we will offer a free return within 30 Days from the day you receive your goods. We will also offer a free software update service. This excludes any custom-made items or tailored solutions.

Warranty: The product enjoys a 3-year limited warranty against defects in materials or workmanship. For more details about the warranty, please check at https://www.fs.com/policies/warranty.html

Return: If you want to return the item(s), information on how to return can be found at https://www.fs.com/policies/day_return_policy.html