Sharper Image SI-755 Mini Steam Iron Owner’s Guide
- June 3, 2024
- Sharper Image
Table of Contents
Sharper Image SI-755 Mini Steam Iron
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See sihomecomfort.com to view, download and print the most current version of these instructions.
INTENDED USE: This product is intended to be used indoors for fabric/garment steaming. The iron is not intended for regular use. This product is not intended for commercial or industrial use. The manufacturer assumes no responsibility for damage or injury due to unauthorized use or product modification. Failure to follow these directions will void the product warranty.
WARNING: Risk to Children and Impaired Persons
- Supervision is required during the installation, operation, cleaning and maintenance of this product by children age 12 or younger and anyone with reduced physical, sensory or mental capabilities. Children should be supervised to ensure that they do not play with the appliance, its parts and packaging material.
Directions to reduce risk of fire, electrical shock, and injury to persons:
-
Read all instructions before use.
-
Use caution when handling this steam unit. Burns could occur from touching hot metal parts, hot water, or steam. Use special care to avoid contact with hot water when turning the product upside down to empty the reservoir.
-
To reduce the risk of contact with hot water, test whether steam is ready before each use while carefully holding the product away from your body. If no steam appears, wait a few more minutes and test again. Do not look into the appliance, use your hands or other objects to check for steam.
-
Do not attempt to use steam function without filling Water Tank.
-
Do not leave appliance unattended while connected.
-
To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
-
Always disconnect appliance from electrical outlet when filling with water or emptying, and when not in use.
-
Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop cord loosely around appliance when storing.
-
Prop unit upright on Stand when cooling to avoid heat damages to surfaces. The iron must be used and rested on a stable surface.
-
Never yank cord to disconnect from outlet. Instead, grasp just the plug and pull to disconnect.
-
Do not use power cord as handle, allow it to hang over edge of counters, or be crimped or closed in doors.
-
Do not operate appliance with a damaged cord, or if the appliance
has been dropped or damaged. The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. To reduce the risk of electric shock, do not disassemble or attempt to repair the appliance. All repairs must be performed by a qualified service professional. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury when the appliance is used. -
A loose fit between wall outlet (receptacle) and plug may cause overheating and distortion of the plug. Discontinue use of the product in this outlet. Contact a qualified electrician to replace loose or worn outlets.
-
Before plugging power cord into electrical outlet, be sure that all electrical information on rating label agrees with your power supply.
-
To reduce the likelihood of circuit overload, DO NOT operate another high wattage appliance on the same circuit.
-
Do not use an extension cord to operate this unit.
-
This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC CONSUMER ADVISEMENT: This equipment may generate, use and/
or radiate radio frequency energy that may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to contact (833.800.8669) or
(help@sihomecomfort.com) for further
instructions about replacement and repair.
Please refer to our website for the most current version of our owner’s guide.
SAVE THESE INSTRUCTIONS
PRODUCT INFORMATION
The following features are included with your Dual Voltage Travel Iron. Carefully inspect the packing material for all parts listed below. To obtain possible missing parts, contact (833.800.8669) or (help@sihomecomfort.com).
UNIT FEATURES & ACCESSORIES
-
Ironing Plate
-
Main Body
-
Heating Indicator Light
-
Water Tank Cap
-
Water Tank Window
-
Steam Button
-
Temperature Control Dial
-
Handle
-
Water Tank (Internal)
-
Voltage Selector
-
Stands
-
Measuring Cup
-
The Ironing Plate is the heated, non-stick surface that is used to press fabrics, remove wrinkles and create creases.
-
The Main Body contains the unit’s internal heating components.
-
The Heating Indicator Light illuminates when the Temperature Control Dial is set to one of the three heat settings.
-
The Water Tank Cap covers the Water Tank fill hole. The Water Tank Cap is tethered to the unit, and cannot be completely removed.
-
The Water Tank Window lets you monitor the level of water in the Water Tank. The unit must be sitting upright to correctly read the water level.
-
The Steam Button is pressed to activate the unit’s steam function. Locking the Steam Button down disables steam; pressing the Steam Button releases it into the unlocked position, enabling steam.
-
The Temperature Dial Indicator serves as the guide to which heat setting is currently active.
-
The Handle is ergonomically designed for user comfort. The Hand Grip contains the unit’s Water Tank, and the base is specially designed for the power cord to be wrapped around for storage.
-
The Water Tank, located inside the Handle, is designed to hold a maximum of 1.18 oz (34.90 ml.) water.
-
The Voltage Selector is the recessed switch which is used to set the unit to either 120V or 220V electrical voltage standards. By default the Voltage Selector is set to 120V.
-
The Stands are the two supports located at the rear of the Main Body. The Stands are designed to support the unit in an upright position when the Ironing Plate is hot, to help prevent damage to surfaces.
-
The Measuring Cup allows you to fill the Water Tank with minimal spillage.
SETTING VOLTAGE
The Dual Voltage Travel Iron features dual-voltage functionality, which allows
it to function correctly in regions with either 120V or 220V electrical
voltage standards. Voltage is set using the Voltage Selector.
For use in Canada or North America, the voltage selector switch should be
placed in the 120 volt position. For use in most foreign countries, the
selector switch must be placed in the 220 volt position. CONFIRM the voltage
available at each location before using the iron.
NOTE: For connection to a 220 volt supply an adaptor plug may be needed.
IMPORTANT: By default, the Voltage Selector is set to the 120V setting.
Be sure to select the correct voltage for your location before plugging power
cord into an electrical outlet.
TO CHANGE THE VOLTAGE SETTING:
NOTE: These steps assume that Voltage Selector is still set to 120V default.
-
Locate Voltage Selector, recessed inside slot at rear of Main Body. Note the open notch in middle of Voltage Selector (Figure 1-A).
-
Find a tool with a fine tip – a pen is ideal.
-
Carefully insert tip of pen into white notch. Slide Voltage Selector to the right, towards 220V label (Figure 1-B).
IMPORTANT: Be sure that Voltage Selector is moved as far to the right as possible for voltage setting to take effect correctly (Figure 1-C). -
Unit is now ready for use in a 220V region. To set unit back to 120V, reverse STEPS 2 & 3, this time sliding Voltage Selector as far to the left (towards 120V label) as possible.
FILLING WATER TANK
FOR STEAM IRONING
- Unplug unit.
- Place unit (Ironing Plate down) on a flat, heat-resistant surface.
- Open Water Tank Cap. Fill the Water Tank with up to 1.18 oz (34.90 ml) of water. Water Tank is likely to leak if Water Tank is overfilled.
- Close Water Tank Cap.
NOTE: In order to extend the life of your unit and keep it functioning at
its maximum potential, it is highly recommended that distilled or de-
mineralized water be used in Water Tank.
While steam-ironing, the Water Tank Window lets you monitor the water level in
the Water Tank. When the water level becomes low:
- Unplug unit. Allow to cool for at least 5 minutes.
- Follow STEPS 2-4 above.
- Plug power cord back in and resume ironing as usual.
HOW TO USE
IMPORTANT: This unit has no on / off switch. The unit must be plugged in to turn on and unplugged to turn off.
DRY IRONING
IMPORTANT: Make sure Steam Button is locked in lowered position before dry ironing. This will prevent any water from accidentally dripping.
-
Plug power cord into a standard electrical outlet.
-
Turn Temperature Control Dial clockwise so that small arrow ( ) on Hand Grip points to one of three heat settings on Dial. Heating Indicator Light will illuminate.
NOTE: It is recommended to start with lower temperatures first, as high settings designed for heavy materials can damage delicate fabrics. -
When Heating Indicator Light turns off, Ironing Plate is heated and ready for use.
NOTE: During use, Heating Indicator Light will cycle on and off as unit works to maintain a constant temperature. You may continue to iron while Light cycles.
STEAM IRONING
-
Plug power cord into a standard electrical outlet.
-
Turn Temperature Control Dial clockwise as far as possible to set unit to high temperature (MAX •••). Heating Indicator Light will illuminate.
-
When Heating Indicator Light turns off, press Steam Button. Button will lock into raised position, and unit will begin emitting steam from steam vents on Ironing Plate.
NOTE: Unit is designed to steam horizontally. Steam flow will stop whenever unit is in vertical upright position. -
To stop steam flow, press Steam Button again to lock it into lowered position. Once all ironing tasks are finished, unplug unit. Be sure that Steam Button is locked in lowered position – this will prevent water from accidentally dripping during next use. Prop unit upright on Stands to cool. Refer to STORAGE & CARE guidelines on Page 15 of this manual for proper storage and maintenance procedures.
STORAGE & CARE
PROPER STORAGE
Preparing your Dual Voltage Travel Iron for storage is quick and simple. When
you have finished your steaming tasks, follow the steps listed below.
IMPORTANT: Make sure Steam Button is locked in lowered position before
storing. This will prevent any water from accidentally dripping.
- Unplug power cord from electrical outlet.
- Prop unit upright on Stands. Allow Iron Plate to cool (30 minutes for complete cooling).
- Remove Water Tank Cap. Drain any water remaining in Tank into a sink or tub. Replace Water Tank Cap.
- Wipe Main Body and Ironing Plate with a soft cloth lightly moistened with water.
- DO NOT clean Ironing Plate with detergents or descalers.
- DO NOT clean Ironing Plate with abrasive or corrosive products.
- DO NOT submerge unit or hold unit under running water.
- Wrap power cord around unit and store in a cool, dry location.
MINERAL BUILD-UP
A common maintenance need for steam appliances is the removal of build-up
caused by high mineral content in many municipal water supplies. This mineral
build-up may cause the unit to spew water, limit the effectiveness and reduce
the life of your Dual Voltage Travel Iron.
The best way to minimize mineral build-up is to use distilled or de-
mineralized water when using your Dual Voltage Travel Iron Steamer. In
addition, it is recommended that the Reservoir be cleaned at least once a
month in order to remove any deposits that form. This will help to extend the
life of your unit and keep it functioning at its maximum potential.
MAINTENANCE
After EACH USE, allow unit to cool, add 1 oz. water, shake to release mineral buildup and empty tank.
TO REMOVE MINERAL BUILD-UP:
-
Follow STEPS 1-3 under PROPER STORAGE section above; however, leave Water Tank Cap open.
IMPORTANT: Unit should remain unplugged during cleaning procedure. -
Make a mixture of 0.5 oz. distilled water and 0.5 oz. vinegar.
-
Pour water-vinegar solution into Water Tank. Close Water Tank Cap.
-
Follow normal steam ironing procedure, as outlined on Page 14. Allow unit to steam out full contents of Water Tank. When finished, lock Steam Button in lowered position and unplug unit.
-
Allow to cool for 5 minutes, then refill Water Tank with fresh distilled water. Repeat STEP 4 until vinegar odor dissipates.
-
Store unit as normal.
WARRANTY
If you’re not satisfied with this product, let us know.
Vornado Air, LLC warrants to the original consumer or purchaser this Sharper
Image® Steam Product (“Product”) is free from defects in material or
workmanship for a period of one (1) year from the date of purchase. If any
such defect is discovered within the warranty period, Vornado, at its
discretion, will repair or replace the Product at no cost.
For warranty or repair service: Call
833-800-8669 or email
help@sihomecomfort.com to obtain a Return Authorization (“RA”) form. Please
have or include your Product’s model number and serial number, as well as your
name, address, city, state, zip code and phone number when contacting Vornado
for warranty service.
After receiving the RA form, ship your Product to: Vornado Air LLC Attn:
Warranty & Repair 415 East 13th Street Andover, KS 67002. For your
convenience, please have your model number and serial number when contacting
Vornado with service inquiries.
To assure proper handling, packages must be clearly marked with the RA number.
Packages not clearly marked with the RA number may be refused at the receiving
dock. Please allow 1-2 weeks for repair and return of your Product after the
Product is received.
Repairs not covered by the warranty or outside the warranty period will
require a fee to cover the cost of materials, labor, handling and shipping.
This warranty does not apply to defects resulting from abuse of the Product,
modification, alteration, mishandling, improper maintenance, commercial use or
repair or service of the Product by anyone other than Vornado; damages which
occur in shipment or are attributed to acts of God. Improper product use,
which includes using an external device that alters or converts the voltage or
frequency of electricity, orshipping a Vornado product to a country not
intended for use will void all warranties. Any unauthorized product
modification, repair by unauthorized repair center, or use of non-approved
replacement parts is not recommended and any consequences will not be covered
by support services or product warranties. The product warranty will be
honored only on models that are being used in the country intended. REPAIR OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the
exclusion or limitation of incidental or consequential damages, or allow
limitations on how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights that vary from state to state. The
manufacturer assumes no responsibility for damage caused by failure to follow
these instructions or improper product use. Any such actions will invalidate
the product warranty.
All company names and product names are trademarks of their respective owners.
© All rights reserved. All technical information, data, and instructions for
the installation, connection, and operation contained in these instructions
for use correspond to the latest available information at time of printing.
The contents of this manual may differ slightly from the actual product.
Observe any additional supplements.
©2019 Vornado Air LLC, Andover, Kansas 67002 USA. Specifications subject to
change without notice. Sharper Image® name and logo are registered trademarks.
Manufactured, marketed and distributed under license by Vornado Air LLC,
Andover, Kansas 67002. Manufactured in China. U.S. Patents Pending. Sharper
Image® Distributed under license by Vornado Air LLC, Andover, Kansas 67002.
FAQs
What are the drawbacks of the steam iron Sharper Image SI-755?****
It could take some time to iron your materials using a steam iron because they don’t create as much heat as steam generators or other steaming systems, and they also need to be refilled more frequently.
How long does a Sharper Image SI-755 steam iron typically last?****
Even the priciest steam irons should last 10 to 20 years. But given the likelihood that technology will advance greatly over the next 20 years, you could decide to update before your iron loses its usefulness.
How does a Sharper Image SI-755 steam iron perform when used without water?****
Yes. Simply unplug your steam iron, let it cool, and then drain the water tank to get rid of the remaining water in the iron. If your iron has a dry/steam setting, select it; if not, select “MIN”. If your iron has a dry/steam setting, select it.
How much electricity is used by the steam iron Sharper Image SI-755?****
A steam iron or flatiron needs about 800-2000 watts each day. For instance, if you leave your iron on for 10 minutes per day for a month, it will use around 5 kWh of electricity. Despite the fact that your model has one of the highest rates of electricity consumption among your appliances, you can calculate the specific amount it uses.
What are the advantages of a steam iron like the Sharper Image SI-755?****
The simplest way to give your clothes a properly pressed appearance and at- home feel is to use a steam iron. The steam from the iron wets the fibres of your clothing, which makes pressing them easier. In addition, the steam maintains the fibres in place for a longer duration.
How should a Sharper Image SI-755 steam iron be cared for?****
Clean the anti-calc valve regularly. To do this, unplug the iron and allow it to cool for 45 minutes. Keep your soleplate clean and slick. Maintain the functionality of your Tefal Access Easy by wiping the soleplate with a damp, smooth cloth. Follow the post-use protocol.
Which Sharper Image SI-755 steam iron wattage is the best?****
Each iron we advise has at least 1,500 watts, which is sufficient for the job. Through testing, I’ve found that low-wattage irons can’t produce enough heat and steam to get rid of tough wrinkles.
How long does it take a steam iron like the Sharper Image SI-755 to heat up?****
The average time for your iron to heat up is two minutes. You can check the “Wait” and “Ready” indicators to see when your iron has reached the ideal temperature for the fabric type you selected.
How do you prevent rust on a Sharper Image SI-755 steam iron?****
Whenever filling a steam iron, only use pure water. Even filtered-free, municipally produced water contains minerals that could damage or clog your iron. Empty the iron’s water tank after every usage. Use a microfiber cloth to dry up any leaks.
Is steam preferable to iron?****
An iron is preferred if results are important. Ironing provides a level of gloss that a steamer cannot, despite the fact that it takes a little longer and requires a little more skill. However, a steamer is easier to use, more flexible overall, and typically gives acceptable results on both delicate and medium-weight materials.
Which iron works better: dry or steam?****
With steam irons, more possibilities are available for ironing. Additionally, they cost more than a dry iron. If you want to save money, using a dry iron is a wise decision. To help with wrinkle removal, you may always mist your clothing with distilled water or starch in a spray bottle.
How does the steam iron Sharper Image SI-755 operate?****
Water inserted into the soleplate of the iron through soft tubing turns to steam when it comes into contact with the heating resistor. In fact, due to the heat (between 130°C and 160°C), the water converts to steam and leaves via the sole’s holes.
What is the expected lifespan of a Sharper Image SI-755 steam iron?****
The most costly steam irons should last between 10 and 20 years. You might decide to update before your iron reaches the end of its useful life, though, as there’s a considerable chance that technology will advance dramatically over the next 20 years.
How much electricity is used by the Sharper Image SI-755 steam iron?****
An average steam iron or flatiron uses 800-2000 watts per day. If you leave your iron on for 10 minutes a day for a month, for instance, it will use roughly 5 kWh of electricity. Even though your model is one of the appliances with the highest rates of electricity consumption, you can compute the exact amount it uses.
Why is the Sharper Image SI-755 steam iron superior to other types of iron?****
Steam softens the fabric, which facilitates a faster and easier ironing process. A dry iron, as the name suggests, cannot mist or steam. This reduces its usefulness while also making operation simpler.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>