Aputure 30120 Light Box Instruction Manual

June 3, 2024
Aputure

Aputure 30120 Light Box Instruction Manual
Aputure 30120 Light Box

Foreword

Thank you for purchasing Aputure Light Box 30120.
Light box 30120 is designed for LS 120d II,LS 300d II,LS 300X, LS 600d Pro,Amaran 60,Amaran 100 and Amaran 200 series and compatible with other Bowens Mount LED video light.

IMPORTANT SAFETY INSTRUCTIONS

When using this unit, basic safety precautions should always be followed, including the following:

  1. Read and understand all instructions before using.

  2. Close supervision is necessary when any fixture is used by or near children. Do not leave the fixture unattended while in use.

  3. Care must be taken as burns can occur from touching hot surfaces.

  4. Care must be taken when touching, installing or disassembling the elastic support rod.

  5. Let the fixture cool completely before storing.

  6. To reduce the risk of injury, please install or disassemble the fixture properly.

  7. The use of an accessory attachment not recommended by the manufacturer may increase the risk of fire, electric shock, or injury to any persons operating the fixture.

  8. Please do not place the fixture near any liquids or other flammable objects.

  9. Only use a dry microfiber cloth to clean the product.

  10. This product is certified by RoHS. Please operate the product in full compliance with the operation standards.
    Please note that this warranty does not apply to repairs arising from malfunctions, although you may request such repairs on a chargeable basis.

  11. The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design or specifications change.

SAVE THESE INSTRUCTIONS

Check list

When you unbox the product, please make sure all the items listed below are included. Otherwise, please contact the seller immediately.

Installations

According to the diagonal installation method, insert the four support rods, then lock the chuck, and fit the velcro on the softbox, then install the softbox on the lamp.

Installations

Use Velcro to install the Fabric Light Control Grid on the diffuser.

Disassembly: Pull out four steel rods diagonally and in the opposite
direction

Specifications

Item Dimension Net Weight
softbox(built) 1203040cm/47.2411.8115.75in 1086g
softbox(Collapsed) 67.8103cm/26.693.941.18in
Front Fabric Diffuser 1(1.5 stop) 12030cm/47.2411.81in
Front Fabric Diffuser 2(2.5 stop) 12030cm/47.2411.81in
Inside Fabric Diffusion 65.520cm/25.87.9in
Fabric Light Control Grid 12030cm/47.2411.81in
Speed Ring Adapter Standard Bowens Mount

Trademarks

Bowens is a trademark registered by Bowens in China and other countries.

Detailed product manual can be found on www.aputure.com.

Serial No.|
---|---
Item Name|
Purchase Date|
Buyer Name|
Buyer Phone|
Buyer Add|
Franchiser Seal|

Aputure Imaging Industries Co.,Ltd.
Inspection: Qualified

Add: F/3, Building 21, Longjun Industrial Estate, Heping West Road, Shenzhen, Guangdong

Service Warranty

Aputure Imaging Industries Co., Ltd. warrants the original consumer purchaser from defects in material and workmanship for a period of one (1) year after the date of purchase. For more details of warranty visit www.aputure.com

Important: Keep your original sales receipt. Be sure the dealer has written on it the date, serial No. of the product. This information is required for warranty service.

This warranty does not cover:

  • Damage that is the result of misuse, abuse, accident (including but not limited to damage by water), faulty connection, defective or maladjusted associated equipment, or the use of the product with equipment for which it was not intended.
  • Cosmetic defects that appear more than thirty (30) days after the date of purchase. Cosmetic damage caused by improper handling is also excluded.
  • Damage that occurs while the product is being shipped to whoever will service it.

This warranty is void if:

  • The product identification or serial No. label is removed or defaced in any way.
  • The product is serviced or repaired by any one other than Aputure or an authorized Aputure dealer or service agency.

Aputure Imaging Industries Co., Ltd. Add: F/3, Building 21, Longjun industrial estate, HePing West Road, Shenzhen, Guangdong
E-MAIL: cs@aputure.com
Sales Contact: (86)0755-83285569-613

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals