Aputure Light Box 6090 User Manual
- June 3, 2024
- Aputure
Table of Contents
LIGHT BOX 6090
Product Manual
Foreword
Thank you for purchasing Aputure Light box 6090.
Light box 6090 is designed for LS 120d II,LS 300d II,LS 300X,LS 600d Pro,
Amaran 60,Amaran 100 and Amaran 200 series and compatible with other Bowens
Mount LED video light.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed, including the following:
- Read and understand all instructions before using.
- Close supervision is necessary when any fixture is used by or near children. Do not leave the fixture unattended while in use.
- Care must be taken as burns can occur from touching hot surfaces.
- Care must be taken when touching, installing or disassembling the elastic support rod.
- Let the fixture cool completely before storing.
- To reduce the risk of injury, please install or disassemble the fixture properly.
- The use of an accessory attachment not recommended by the manufacturer may increase the risk of fire, electric shock, or injury to any persons operating the fixture.
- Please do not place the fixture near any liquids or other flammable objects.
- Only use a dry microfiber cloth to clean the product.
- This product is certified by RoHS. Please operate the product in full compliance with the operation standards. Please note that this warranty does not apply to repairs arising from malfunctions, although you may request such repairs on a chargeable basis.
- The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design or specifications change.
SAVE THESE INSTRUCTIONS
Check list
When you unbox the product, please make sure all the items listed below are
included. Otherwise, please contact the seller immediately.
Installations
According to the diagonal installation method, insert the four support rods, then lock the chuck, and fit the velcro on the softbox, then install the softbox on the lamp.
Use Velcro to install the Fabric Light Control Grid on the diffuser.
Disassembly: Pull out four steel rods diagonally and in the opposite direction
Specifications
| Item | Dimension | Net Weight |
|---|---|---|
| softbox(built) | 609053 cm/23.6235.4320.86in | 121 Sg |
| softbox(Collapsed) | 67103cm/26.383.941.18in | |
| Front Fabric Diffuser 1(1.5 stop) | 6090cm/23.6235.43in | |
| Front Fabric Diffuser 2(2.5 stop) | 6090cm/23.6235.43in | |
| Inside Fabric Diffusion | 3529cm/13.711.4in | |
| Fabric Light Control Grid | 6090cm/23.6235.43in | |
| Speed Ring Adapter | Standard Bowens Mount |
Trademarks
Bowens is a trademark registered by Bowens in China and other countries.
GUARANTEE CARD
Serial No.|
---|---
Item Name|
Purchase Date|
Buyer Name|
Buyer Phone|
Buyer Add|
Franchiser Seal|
Aputure Imaging Industries Co.,Ltd.
Inspection: Qualified
Add: F/3, Building 21, Longjun industrial Estate, Heping West Road, Shenzhen,
Guangdong
Service Warranty
Aputure Imaging Industries Co., Ltd. warrants the original consumer purchaser from defects in material and workmanship for a period of one (1) year after the date of purchase. For more details of warranty visit www.aputure.com
Important:
Keep your original sales receipt. Be sure the dealer has written on it the
date, serial No. of the product. This information is required for warranty
service.
This warranty does not cover:
- Damage that is the result of misuse, abuse, accident (including but not limited to damage by water), faulty connection, defective or maladjusted associated equipment, or the use of the product with equipment for which it was not intended.
- Cosmetic defects that appear more than thirty (30) days after the date of purchase. Cosmetic damage caused by improper handling is also excluded.
- Damage that occurs while the product is being shipped to whoever will service it.
This warranty is void if:
- The product identification or serial No. label is removed or defaced in any way.
- The product is serviced or repaired by any one other than Aputure or an authorized Aputure dealer or service agency.
Aputure Imaging Industries Co., Ltd.
Add: F/3, Building 21, Longjun industrial estate,
HePing West Road, Shenzhen, Guangdong
E-MAIL: cs@aputure.com
Sales Contact: (86)0755-83285569-613
Detailed product manual can be found on www.aputure.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>