BLUETTI PS70 720Wh Portable Power Station User Manual
- June 3, 2024
- Bluetti
Table of Contents
BLUETTI PS70 720Wh Portable Power Station
Please read this manual before use and follow its guidance. Keep this manual for future reference.
Safety instructions
Please observe the following instructions to ensure safe usage
- Do not alter or disassemble this product.
- Do not move during charging or using it, because the vibration and impact during moving will lead to poor contact of output interface.
- In case of fire, use dry powder fire extinguishers for this product. Do not use water fire extinguisher,which may cause electric shock.
- Close supervision is required when using this product near children.
- Please confirm the rated specification of your load, and do not use it beyond the specification.
- Do not place the product near heat sources, such as electric furnace and heaters.
- Not permitted on aricrafts because the battery capacity exceeds 100Wh.
- Do not touch the product or the plug-in points if your hands are wet.
- Check the product and accessories prior to every use. Do not use if it is damaged or broken.
- Please unplug the AC adapter from the wall outlet immediately in case of lightning stroke, which may cause heating, fire and other accidents.
- Use original charger and cables.
General Specs
Output Specs
Input Specs
Estimated operating time
- Smartphone
- 55-60hrs 10W
- LED Light Bulb
- Around 25-30hrs 20W
- Television
- Around 7.5-8hrs 75W
- Electronic Tools
- Around 7-7.5hrs 80W
- Refrigerator
- Around 6-6.5hrs 90W
- Slow Cooker
- Around 2.5-3hrs 200W
720Wh×DOD× ÷ (the current load power W) = available time(unit: hrs/times)
Note: DOD is the battery discharge depth, is the local inverter efficiency, DOD=90%,=90%.
OVERVIEW
- Main Power Button
- LCD Screen
- DC Input Port
- USB Power Button
- USB-A(QC3.0) Output x 2pcs
- USB-C PD Output
- USB-A 5V/3A Output x 2pcs
- AC Power Button
- US AC Output x 4 pcs (EU/UK AC Output x 1pcs)
- DC 13/10A Output
- DC 12V/10A Output(5521) x 2pcs
- DC Power Button
- LED Flashlight
Solar Charging
Safety instructions
- a. Charging Power
- b. DC ON/OFF Switch
- c. DC Output Power
- d. AC ON/OFF Switch
- e. AC Output Power (Frequency Switching)
- f. Battery Capacity Status
What`s In The Box
FREQUENTLY ASKED QUESTIONS
- The adapter (power brick) got hot when I charge it, is that alright?
- It’s totally normal for the adapter gets warm, because of the heat produced in circuit during charging.
- Why the unit shutdown automatically with my appliance connecting?
- The“ECO MODE”(press then hold for 4s to launch) is set to shut down the unit when the gross output of the unit is lower than 50W in 4 hours for power saving.
- What cause the cooling fan not to launch?
- With the excellent heat dissipation design, cooling fan will only launch when the total loads exceeds 30% of the rated output.
- Can I charge and discharge the power station simultaneously?
- Yes, it is supported but not recommended in order to protect the lifespan of battery
- How to claim the warranty?
- Please refer to the warranty card or the official website for further warranty policy.
Abbreviation Explain
- DC/AC = Direct Current / Alternating Current
- BMS = Battery Management System
- PV = PhotoVoltaic (Solar power)
- CS = Charging State
Certificate
- Inspector: ………………………………………………..
- Q C: ………………………………………………..
P/N: 17.0303.0319-00A0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>