vocaster HP60V Essential Podcasting Kit User Guide
- June 3, 2024
- vocaster
Table of Contents
vocaster HP60V Essential Podcasting Kit
Introduction
Hear your show in perfect detail with the Vocaster HP60v closed-back studio
headphones. The Vocaster HP60v headphones let you hear your show as the world
will.
The Vocaster HP60v headphones include:
- A lightweight adjustable cushioned headband for extended listening periods.
- Screw-on 6.35mm stereo jack adaptor to use the Vocaster HP60v headphones with all your devices.
- Wide, smooth frequency range to accurately monitor your recordings.
- Closed-back design to isolate external noise and provide the best conditions for monitoring.
The closed-back design stops your microphone picking up your mix and the comfortable headband means you can tell your stories and produce your show for as long as you like.
Dimensions
Setup
Using the 6.35mm Jack Adaptor
You can use your Vocaster HP60v headphones with most audio devices however not
all audio equipment uses the same size headphone connector. To connect to your
Vocaster, or most audio interfaces, you need to use the included 6.35mm jack
adaptor. To connect to smaller devices like a laptop or phone you need to
remove the 6.35mm jack adaptor by unscrewing it from the headphone cable.
Screw on the 6.35mm jack adaptor clockwise to connect the headphones to your
Vocaster or audio interface:
Vocaster HP60v FAQs
The headphone jack is too big/small to fit the headphone output on my device
The Vocaster HP60v headphones include a screw-on 6.35mm jack adaptor. For
smaller devices like phones and computers you need to unscrew the adaptor
(anti-clockwise) to use your headphones.
Can I use the Vocaster HP60v headphones with any device?
Yes, you should be able to use the Vocaster HP60v headphones with almost any
device, other interfaces, phones, laptops, mixing consoles and more
Are the Vocaster HP60v headphones on-ear or over-ear headphones?
The Vocaster HP60v headphones are closed-back over-ear headphones.
Specifications
Technical Specifications
Performance
- Impedance 32Ω
- Sensitivity 98dB ±3dB
- Frequency Response 20Hz – 20kHz
- Maximum Power 1.2W
Physical Characteristics
- Loudspeaker Diamete r 50mm
- Cable Length 3m (approximately)
- Connector 3.5mm Stereo Jack/6.35mm screw-on adaptor
- Weight (including cable) 288g (10.15 oz)
Accessories and Spare Parts
Part Part Number
- Gold screw-on 6.35mm stereo jack adaptor HP60v MISC002200
- Single ear cushion (left or right) HP60v MISC002201
To get spares for your Vocaster HP60v headphones please either contact our Spares team or speak to your local distributor:
- Contact our Spares Team: support.focusrite.com
- Contact your local distributor: stockists.focusrite.com