innovative STX-2-800-SLD Staxx Dual Articulating Monitor Mount Instruction Manual
- June 4, 2024
- INNOVATIVE
Table of Contents
STAXX™
Installation Instructions
STX-2-XXX-SLD-8510-YYY
PARTS LIST
- Included with optional thru-desk kit only, model # 8524-TM-CK (sold separately).
DESK CLAMP CONFIGURATION
**** If the monitor arm or pole does not easily fit into the mount, remove the bushing from the mount and place it on the monitor arm or pole, and press firmly back into the mount.
THRU-DESK CONFIGURATION*
IMPORTANT:
When inserting pole into mount, the dimples should be aligned perpendicular to
the rear edge of the mounting surface.
7
IMPORTANT:
Install part (G) in the orientation as shown to the left. When washer, part
(G), is installed correctly, the arms will not rotate past the back of the
mount.
**** Optional Adjustment
In some instances, an additional counterbalance adjustment may be needed to
allow the arm’s instant height adjustment function to work properly.
If your arm is not staying in position after performing step 17, tighten the
adjustment screw with a 1/8″ Allen wrench.
Innovative Ergonomic Solutions
800 524 2744
customerservice@team-ies.com
team-ies.com
HAT Collective
408 437 8770
cs@hatcollective.com
hatcollective.com
© 2021 Innovative Ergonomic Solutions REV A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>