Burlington FC7 43cm Corner Unit EXC Basin Instruction Manual
- June 3, 2024
- Burlington
Table of Contents
43cm corner unit exc basin
FC7 43cm Corner Unit EXC Basin
IMPORTANT: This unit must be securely fixed to a wall. Ensure that the top is horizontal before marking the wall for fixing. The wall fixings supplied may not be suitable for your installation. You may need to source alternatives depending on the material and strength of the wall you are fixing to. Buffers are supplied to stop the crash of the doors. These can be fitted if necessary.
Parts Supplied:
- Place the cabinet in final position, and check for loot if not please attest the feel at the bottom d the satinet.
- Please remove the protecting film before installing the glass shelf.
Please plug in plastic clamp in the proper position, then insert the glass shelf.
-
Fix the cabinet onto the wall.
-
Check the door for level. If not, please adjust the screw on the hinge.
-
Anti-Clockwise adjustment lifts the top corner.
-
Clockwise adjustment drops the top corner.
Place silicon seal to top surfaces where basin sits. and back edge of basin to
wall.
This is to prevent water collecting between the worktoptbasin and the cabinet.