CSOOPAR WH305A Wireless Headphone User Manual
- June 3, 2024
- CSOOPAR
Table of Contents
User Manual
Model:
WH305A
Wireless Headphones
Diagram
- Volume + button/ next song
- Multi-function button
- Volume- button / previous song
- BT LED indicator
- 3.5mm audio port
- Type-C charging port
- Microphone
- ANC /Transparency button
- ANC switch indicator
Package List
Wireless Headphones xl
3.5mm Audio Cable xl
User Manual xl
Charging Cable xl
Specification
| Model No | WH305A |
|---|---|
| Wireless Version | V 5.0 |
| Wireless Profile | NEP. A2DP. AVRCP . HSP |
| Operation Range | 33ft (10m) |
| Battery Capacity | 3.7V/ 950mAh |
| Charging Voltage | 5V=1A |
| Charging Time | 2.5 Hours |
| Music | 80 Hours |
Media Playback & Volume Functions
| Play/Pause | Press “MFB” button |
|---|---|
| Next Track | Press “+” |
| Previous Track | Press “-“ |
| Volume Up | Press and hold “+” button |
| Volume Down | Press and hold “-” button |
Call Functions
| Answer/Hang up | Press “MFB” button |
|---|---|
| End a call | Press “MFB” button |
| Decline an incoming call | Press and hold “MFB” button for |
2 sec while a call is coming
Switch to mobile phone| Press and hold “MFB” button for
2 sec during a call
Siri/Google Voice| Double-click the “MFB” button
Power On/Off
Power On: Press and hold the “MFB” button for 2 sec. Power Off: Press and hold
the “MFB” button for S sec.
How to Pair
When the headset is power off, press and hold the Multi-function Button until
the indicator flashes blue and red alternately to enter the pairing mode. Turn
on the Bluetooth of the mobile phone and find ” WH305A” to connect.
Clear Paired Device
Long press the “MFB” button and the Volume “-” button simultaneously until the
red and blue lights flash 3 times at the same time.
Charge the Headphones
In Charging: Red led light stays on. Full Charge: Blue led light stays on
(charging for 2.5 hours).
ANC CONNECTION
Turn on the ANC button on the headphones to suppress outside noise. Reminder:
ANC mode can only be activated when the headphone is powered on. Even in wired
mode, you need click MFB button to turn on the headphone first, then, click
ANC button to active ANC function.
Under ANC mode,press ANC button to switch to Transparency mode or tum off
noise cancelling
Q: Couldn’t connect?
A: Please hold the “-” and circle button at the same time for 5 seconds, then
search bluetooth devices to connect the headphones.
Q: How to connect to 2 devices simultaneously?
A: 1. Pair with your first device 2.Turn off the bluetooth of the first
device, pair with the second device 3.Turn on the bluetooth of the first
device to connect again 4. Now your headset is connected to the 2 devices at
the same time.
Q: How to adjust the volume?
A: Hold down “+” or “-” button to increase/decrease the volume. Press the
button once will jump to the next track.
Q: What type of device is compatible?
A: This headsets are compatible with all devices that support Bluetooth or 3.5
mm plug cables. A wireless Transmitter (NOT Included) needs to be prepared
when connected with a non-Wireless enabled TV/PC.
Warranty Information
30 days free return and 18 months warranty is our guarantee, please feel free
to contact us at Aftersale-servicem@outlook.com for further inquires.
FCC STATEMENT:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.This
device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,
(2)This device must accept any interference received,including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
NOTICE .
Note: This equipment has been tested and found to comply with these limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISEDC RSS Warning:
This device complies with Innovation, Science and Economic Development Canada
Compliance licence-exempt RSS standard (s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,including interference that may
cause undesired operation of the device. ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This product complies with the radio interference requirements of the European
Community.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Follow local rules and never dispose of the product and rechargeable batteries
with normal household waste. Correct disposal of old products and rechargeable
batteries helps prevent negative consequences for the environment and human
health.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>