Whirlpool 5.5 Cu. Ft. Top Loading Washing Machine User Guide
- June 3, 2024
- Whirlpool
Table of Contents
TOP LOADING WASHING MACHINE
QUICK START GUIDE
OPERATING INSTRUCTIONS
WARNING
Fire Hazard
Never place items in the washer that are dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it (including cooking
oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.
Step 1. ADD HE DETERGENT
Designed to use only HE (High Efficiency) detergents.| Step 2. LOAD
CLOTHES
For best results, load garments in loose heaps evenly around the basket wall.
---|---
NOTE: See ADDING LAUNDRY PRODUCTS (below) for more
information on adding HE detergent, fabric softener, and/or bleach.|
Step 3. PRESS POWER TO TURN ON THE WASHER| Step 4. SELECT THE DESIRED CYCLE
FOR YOUR LOAD
---|---
Step 5. ADJUST CYCLE SETTINGS, IF DESIRED| Step 6. SELECT ADDITIONAL OPTIONS
Step 7. PRESS AND HOLD START/PAUSE TO BEGIN CYCLE
NOTE: Start button must be held for 1 second to start cycle. Once the
status lights are illuminated, release the start button.
*Not all cycles, settings or options are available with all models.
ADDING LAUNDRY PRODUCTS
IMPORTANT: Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component malfunction and, over time, buildup of mold or mildew. HE detergents should be low-sudsing and quick-dispersing to produce the right amount of suds for the best performance.
ADDING LIQUID CHLORINE BLEACH
Add a measured amount of liquid chlorine bleach to the dispenser cup. Do not
overfill, dilute, or use more than 1 cup (236 mL). Do not use colorsafe bleach
or oxi products in the same cycle with liquid chlorine bleach.
CONTROL PANEL AND FEATURES
*Appearance may vary depending on model.
-
POWER
Press to turn on/off or to stop/cancel a cycle. -
CYCLE KNOB
Turn knob to select desired cycle. -
START/PAUSE
Press and hold the Start/Pause button for a few seconds until all status lights are illuminated, then release to start cycle. Press during a cycle to pause cycle and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid. -
CYCLE MODIFIERS (Not all modifiers are available on all cycles)
TEMP
Press to modify the cycle’s available temperatures (Tap Cold, Cold, Cool, Warm, or Hot).
NOTE: Pressing Temp will toggle through available temperature options. When no lights in the temperature column are illuminated the selected temperature is Tap Cold.
RINSE OPTIONS
Press to modify the cycle’s available rinse options. Press once for Fabric
Softener, twice for Extra Rinse and three times to activate both.
FABRIC SOFTENER
Select this option to let the machine know when you have added liquid fabric
softener.
EXTRA RINSE
Select this option to add a second rinse.
DEEP WATER OPTIONS
Press to modify the cycle’s available deep water options (Medium or High). Use
these options to automatically add more water to your wash cycle. You can also
use this option to reduce the likelihood of white residue on dark clothing.
NOTE: If the washer detects an out-of-balance condition it may pause and
attempt and re-distribute the load. During this time the Sense and Wash status
indicators will both briefly illuminate.
WARNING: Do not wash water-resistant or water repellant-type clothing.
Failure to closely follow these instructions may result in an abnormal
vibrating and out-of-balance condition that could result in physical injury,
property damage, and/or appliance damage.
CHOOSING THE RIGHT CYCLE
A cycle guide for your washer can be found online at www.whirlpool.com. The document will help identify which cycle to choose for various load types as well as the default cycle options. For example we recommend using the NORMAL cycle with Warm water for cottons, linens and mixed-garment loads.
MORE WATER WHEN YOU WANT IT
AUTO SENSING AND DEEP WATER
- The washer will adjust the water level to the optimal amount for a High Efficiency wash of the detected load size.
- Use one of the Deep Water Options to automatically add more water to your wash cycle.
- It is recommended to use BULKY ITEMS cycle with Deep Water-High option for loads where maximum water level is desired.
- Expect longer cycle times due to extended fill duration when using the Deep Water Options.
CLEANING WITH LESS WATER
The washer has been designed and optimized to provide a thorough cleaning
using less water to conserve energy and resources.
As the washer dampens and moves the load, the level of the items will settle
in the basket. This is normal, and does not indicate that more items should be
added.
IMPORTANT: You will not see a full basket of water as with older, less
efficient washing machines. It is normal for some of the load to be above the
water line.
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your machine.
ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION
For information on any of the following items, a full cycle guide, warranty, detailed product dimensions, or for complete instructions for use and installation, please visit www.whirlpool.com/owners, or in Canada www.whirlpool.ca/owners. This may save you the cost of a service call.
To speak with a customer service representative or if you have additional
questions, call us toll
free at 1-866-698-2538 or in Canada
call 1-800-807-6777.
You can write with any questions or concerns at:
Whirlpool Brand Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692| Whirlpool Brand Appliances
Customer eXperience Centre
Unit 200-6750 Century Ave
Mississauga, Ontario L5N 0B7
---|---
Please include a daytime phone number in your correspondence.
IMPORTANT: Retain this guide for future use.
®/™ ©2021 Whirlpool. All rights reserved. Used under license in Canada.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>