ProBreeze PB-18 12L Compressor Dehumidifier Instruction Manual

June 3, 2024
ProBreeze

Instruction Manual

Model PB-18
12L Compressor Dehumidifier
IMPORTANT INSTRUCTIONS
– RETAIN FOR FUTURE USE

PB-18 12L Compressor Dehumidifier

Thank you for choosing to purchase a product from Pro Breeze. Please read the entire manual carefully prior to first use and keep in a safe place for future reference.

SAFETY INSTRUCTIONS

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE, OR INJURY TO PEOPLE, ALWAYS TURN THE APPLIANCE OFF, UNPLUG THE  POWER CORD FROM THE ELECTRICAL OUTLET AND EMPTY THE WATER TANK BEFORE HANDLING, CLEANING OR SERVICING THE APPLIANCE.

  • Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to person.

  • Do not cover the appliance whilst in use.

  • Do not immerse the appliance in water.

  • Dispose of water collected from the appliance. This water is not drinkable.

  • The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.

  • The appliance must have a minimum 50cm clearance around all sides.

  • Children must be supervised not to play with the appliance.

  • Children of less than 3 years and pets should be kept away unless continuously supervised.

  • Do not leave children alone or unattended in the area where the appliance is in use.

  • Cleaning and user maintenance shall not be made by children unless continuously supervised.

  • Avoid placing the device in areas where it can become a tripping hazard.

  • Place the appliance on a flat, stable and dry surface and always keep the appliance in an upright position. Operating the appliance in any other position could cause a hazard.

  • Do not place the appliance against a wall or other appliances.

  • Do not cover the appliance or restrict the air flow of the inlet or exhaust grills whilst in use.

  • Never place anything on top of the appliance.

  • Do not operate the appliance with wet hands.

  • Do not use this appliance near water or in the immediate surroundings of a bath, shower, or a swimming pool. Never place the appliance where it may fall into a bathtub or other water container.

  • Do not allow water or other liquids to run into the interior of the appliance, as this could create a fire and/or electrical hazard.

  • Do not use mechanical devices to accelerate the appliances defrosting process.

  • Do not place the continuous drainage hose outside when the temperature falls below 1C.

  • Do not use the appliance without the air filter.

  • This appliance is intended for indoor household use and similar applications.
    Do not use outdoors.

  • Never leave the appliance unattended while in use. Always turn the appliance off and disconnected from the power supply when not in use.

  • Avoid placing the power cord in areas where it can become a tripping hazard. Do not place the power cord under carpeting or cover it with rugs, runners or similar.

  • To avoid a circuit overload when using this appliance, do not operate another high-wattage appliance on the same electrical circuit.

  • Always plug the appliance directly into a wall socket. Avoid using extension leads where possible as they may overheat and cause a risk of fire.

  • Do not use this appliance with an external programmer, timer switch or any other device which would switch the appliance on automatically unless this has already been pre-built into the appliance by the manufacturer.

  • Do not pull on the power cord. Never move, carry, or hang the appliance by the power cord.

  • Do not kink or wrap the power cord and plug around the appliance, as this may cause the insulation to weaken or split, particularly where it enters the appliance.

  • This appliance is only to be used with the mains adapter supplied.

  • Do not operate the appliance with the water tank removed.

  • Ensure the mains cable is fully extended before use and arrange it so that it is not in contact with any part of the appliance.

  • Do not operate the appliance with any safety guards removed.

  • Do not operate the appliance if there are signs of damage to the appliance, power cord, or any of the accessories supplied. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.

  • Do not attempt to repair or adjust any electrical or mechanical elements in the appliance. Doing so may be unsafe and will void your warranty.

  • Ensure that the mains supply (including voltage, frequency and power) complies with the rating label of the appliance.

  • Do not use the appliance near petrol, paints, flammable gases, ovens, or other heating sources.

  • Never insert fingers or metal objects into the vents and openings of the appliance.

  • This appliance is only designed for use with R290 gas. Do not use any other gas.

  • This appliance is intended for domestic use only. It should not be used for commercial purposes.

  • Do not place the continuous drainage hose outside when the temperature falls below 1°C.

DEHUMIDIFIER BENEFITS
For advice on the benefits of dehumidifiers and how to get the best out of your unit, visit our advice blog at www.probreeze.com.
SPECIFIC INFORMATION REGARDING R290 REFRIGERANT GAS

WARNING: THE APPLIANCE MUST BE INSTALLED, OPERATED AND STORED IN A ROOM WITH A FLOOR AREA LARGER THAN 4M ².

  • This appliance contains 0.05kg (50g) of R290 refrigerant gas.
  • R290 is a refrigerant gas that complies with the European directive on the environment.
  • Do not puncture any part of refrigerant circuit.
  • Be aware R290 refrigerant is odourless and does not have the odour normally associated with natural gas and propane tanks.
  • Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
  • The appliance must be placed in an area without any continuous sources of ignition such as open flames, gas, or electrical appliances in operation.
  • Do not puncture and do not burn.
  • If the appliance is installed, operated or stored in a non-ventilated area, the room must be designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.
  • The appliance must be stored in such a way as to prevent mechanical failure.
  • Individuals who operate or work on the refrigerant circuit must have the appropriate certification issued by an accredited organisation that ensures competence in handling refrigerants according to a specific evaluation recognised by associations in the industry.
  • Maintenance and repairs that require the assistance of other qualified personnel must be performed under the supervision of an individual specified in the use of flammable refrigerants.

SPECIFICATION

  • Model: PB-18
  • Voltage: 220-240V~
  • Frequency: 50Hz
  • Power: 200W
  • Collection Capacity: 12L per day at 30°C and 80% relative humidity
  • Max Tank Capacity: 2L
  • Operating Range: 5°C-35°C
  • Product Dimensions: 255x220x445mm
  • Net Weight: 10kg
  • Gross Weight: 11kg

PARTS

|
---|---

EXPLANATION OF SYMBOLS DISPLAYED ON THE UNIT

**| WARNING| The symbol shows that this appliance uses a flammable refrigerant. If the refrigerant leaks and is exposed to an external ignition source, there is a risk of fire.
---|---|---
**
| CAUTION| This symbol shows that the operation manual should be read carefully.
**| CAUTION| This symbol shows that a service personnel should be handling this equipment with reference to the installation manual.
**
| CAUTION| This symbol shows that information is available such as the operating manual or instruction manual.

POSITIONING YOUR UNIT

  • This unit is designed to operate in temperatures between 5ºc and 35ºc.
  • Place the unit in an area where the temperature will not fall below 5ºc. In temperatures below 5ºc, the coils may freeze, leading to a reduction in performance.
  • Place the unit on a smooth, level surface, strong enough to support the unit with a full water tank.
  • Allow at least 50cm of space behind the air outlet (at the back of the unit) for good air circulation. Allow at least 20cm of space on all other sides of the unit for good air circulation.
  • Place the unit away from a clothes dryer, heater or radiator.
  • For best results, place the unit in an enclosed space and close all doors windows and outside openings.
  • If placed near an enclosed storage area (like a wardrobe or cupboard), ensure there is adequate circulation of air.
  • There are four wheels attached to the unit for ease of transportation. Do not force the wheels to move over carpet.

OPERATING INSTRUCTIONS

Display Panel

  1. Timer Indicator
  2. Automatic Mode Indicator
  3. Continuous Mode Indicator
  4. Sleep Mode Indicator
  5. On/Off Indicator
  6. Low fan speed Indicator
  7. High fan speed Indicator
  8. Humidity/Current Humidity
  9.  Tank Full Indicator
  10.  Lock Indicator

  • Power button
    Standby mode:
    As you plug the appliance into the power supply, it will beep and all the indicators will flash on and then off. The power indicator will be on in the top righthand corner of the  LED display. Your appliance is now in standby mode.
    Turning on:
    Press the power button to turn on the appliance. Its default mode will be automatic mode, with high wind speed and humidity of 60%. The appliance will start up in the  mode selected when the unit was last used.
    Turning off:
    Press the power button to turn the appliance off.
    Unplug the appliance if it will not be used for extended periods.

  • Mode button: Press the mode button to cycle between different modes. The corresponding indicator will light up.
    Auto mode:
    In this mode, when the environment’s humidity exceeds the set humidity by more than 3%, the fan will automatically turn on and 3 seconds later the compressor will start  working. The appliance will automatically turn off if the environment’s humidity is 3% lower than the set humidity. You can adjust the fan speed and humidity settings in this
    mode.
    Continuous drying mode:
    In this mode, the appliance will be on and the set humidity cannot be changed.

Sleeping mode:
In this mode, after 10 seconds all indicators will turn off and the wind speed will change to low. Touch any button to bring the indicator lights back on. In sleep mode, error  codes will not be displayed, and the wind speed is not adjustable. The humidity settings are still adjustable.


  • HUMIDITY button
    While the appliance is on, in auto mode or sleep mode, press the humidity button to cycle through the humidity settings. These will display on the display panel in 5%  increments, between 30% and 80%. When you reach your target room’s humidity, it will set after 5 seconds of no other buttons being pressed.
    Long press the humidity button to view the current room temperature on the LED display. After 5 seconds, the LED display will revert to the current humidity.

  • LED display
    The numbers on the LED display will show the current humidity of the room, the hours set when setting a timer, or the temperature when the humidity button is held down.  The icons around the numbers will indicate the fan setting, mode, and if the child lock is on.


  • Timer button
    Press the timer button to cycle between 1 – 24 hours, in increments of one hour. The hours set will be displayed on the LED display.
    When the LED display reads ‘00’, the timer is turned off, and the indicator will turn off.
    While the appliance is on, set the timer to turn the appliance off.
    While the appliance is in standby mode, set the timer for the appliance to turn on.

  • Fan Speed button
    In auto mode, press the fan speed button to switch between high and low fan speed. The corresponding indicator will light up.


  • Lock button
    Long press the lock button to activate child lock. All buttons on the appliance will be locked and the child lock indicator will be on.
    To remove child lock, press the lock  button again. The indicator will turn off.
    Child lock will be turned off when the appliance restarts.

  • Note: The appliance will start up in the mode selected when the unit was last used. The appliance will not start if the water tank is not fitted in the unit correctly. The  compressor’s start is delayed by 3 minutes after the start of the fan.

Colour Display:
The light will display different colours according to the ambient humidity of the environment:

  • Blue – Below 45%
  • Green – Between 45% and 65%
  • Red – Above 65%

Note: The light will also be red if any of the error codes are displayed on the LED display. See the ‘error codes’ section for more information.

ERROR CODES

ERROR CODE CAUSE SOLUTION
E0 The wiring has malfunctioned. Contact Pro Breeze Customer Care by

sending an email to help@probreeze.com or via our website www.probreeze.com
E2| The humidity sensor is unable to detect the humidity of the environment.
LO| The humidity of the environment is below 20%| The appliance will automatically shut down to prevent damage. Move the appliance to a more suitable environment and manually restart it.
HI| The humidity of the environment is above 90%
CL| The temperature of the environment is below 5℃
CH| The temperature of the environment is above 38℃

CONTINUOUS DRAINING

To connect the drain hose to the unit:

  1. Insert one end of the hose into the continuous drainage hole of the unit. Ensure it is connected securely.
  2. Place the other end of the hose into a bucket or a drain.
  3.  Ensure the hose is not bent or blocked.
    Note: Gravity will pull the water out of the unit into your chosen drainage area. Ensure the chosen area is not higher than the unit.

MAINTENANCE

Removing the water tank:

  • When the water tank is full, the unit will make a buzzing sound, and the Water Full light will turn on.
  • Press the power button to turn off the unit.
  • Slide the water tank out of the body of the dehumidifier.
  • Empty the water tank and clean the inside and the outside.
  • Replace the empty tank back into the unit.
  • Press the power button to resume operating.
  • If the Water Full light does not turn off, check that the water tank is correctly in place.

CLEANING & STORAGE

WARNING: ALWAYS TURN THE APPLIANCE OFF AND UNPLUG THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD CREATE A FIRE  AND/ OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.

  • Do not attempt to clean the appliance in any other way than that detailed by the manufacturer.
  • Always empty the water tank, clean and dry the appliance when not in use to prevent mould.

Cleaning the water tank:

  • Remove and empty the water tank as per the instructions above.
  • Clean the water tank with warm tap water and mild detergent (e.g. washing up liquid).
  • Ensure to remove any scale or deposits that have formed inside the water tank.
  • Wipe all surfaces dry before placing the water tank back into the appliance.
  • The water tank should be cleaned at least every week or prior to storage to prevent growth of mould, mildew, and bacteria.

Note: Do not use boiling water to clean the water tank.
Cleaning the Air Filter:
WARNING: DO NOT OPERATE THE UNIT WITHOUT AN AIR FILTER OR THE EVAPORATOR MAY BE CONTAMINATED.

  • Clean your air filter every two weeks using a damp cloth to prevent it becoming blocked and causing damage to the unit.
  • To remove the air filter, first remove the water tank from the body of the unit so you can reach the filter. Pull out the filter from the bottom rear of the unit.
  • Use a vacuum cleaner to gently absorb the dust on the surface of the filter.
  • If needed, wash the filter with water and a soft detergent. Dry thoroughly before putting back in the unit.
  • Ensure the filter is completely clean and dry before returning it to the unit. Cleaning the exterior of the unit:
  • Clean the exterior surface of the appliance by wiping it with a soft, damp cloth. Dry the appliance with a soft, clean cloth.

Storage:

  • Empty the water tank prior to transport and storage.
  • To store your product, we recommend using the original or a similar sized box.
  • Ensure the appliance and water tank are clean and dry before storage.
  • Store in a clean, dry place away from direct sunlight. Place out of reach of children.

TROUBLESHOOTING

If you experience any issues with this product, please try these troubleshooting tips. If the issue is not solved, please contact our customer care team by emailing help@probreeze.com

PROBLEM WHAT TO CHECK:
The appliance won’t start • Ensure the appliance is properly plugged

into the power supply.
• Ensure the water tank is not full.
• Ensure the water tank is in its proper position in the unit.
The appliance doesn’t function as it should| • Ensure there is nothing blocking the appliance. Keep 50 cm clearance around the back and 20 cm clearance on all sides of the appliance.
• Ensure the appliance is functioning in the correct ambient temperature and humidity level.
• Ensure all doors and windows are closed.
The appliance is making a loud noise| • Ensure the air filter is clean and free of dust and debris.
• Ensure the appliance is upright, level and on a stable surface.
There is water on the floor| • The hose connector on the back of the unit may be loose. Check that it is properly secured.
LO, HI, CL, CH, E0, or E2 appear on the display| • These are error codes. Please check the ‘error codes’ section of this instruction manual.

RECYCLING & DISPOSAL

The packaging of your new product has a recycle mark on it. Please dispose of it as recycled paper. Waste electrical products should not be disposed of with general  household waste. This is to prevent the possible harm to the environment and human well-being. Contact your local council or government for information regarding the collection schemes in your area.

www.probrteeze.com
One Retail Group, Ryland House
24a Ryland Road, London, NW5 3EH, United Kingdom
EU Authorised Representative: Brandrep Limited, The Black Church
St Mary’s Pl N, Dublin, D07 P4AX, Ireland
© Copyright 2021

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ProBreeze User Manuals

Related Manuals