probreeze PB-P07 Air Purifier Filtration System Instruction Manual

probreeze PB-P07 Air Purifier Filtration System

Thank you for choosing to purchase a product from Pro Breeze. Please read the entire manual carefully prior to first use and keep in a safe place for future reference.

SAFETY INSTRUCTIONS

WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE OR INJURY TO PEOPLE, ALWAYS MAKE SURE THE APPLIANCE IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT.

• Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to person.

• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.

• The appliance must have a minimum 50cm clearance around all sides.

• Children must be supervised not to play with the appliance.

•  Children of less than 3 years should be kept away unless continuously supervised.

•  Do not leave children alone or unattended in the area where the appliance is in use.

• Cleaning and user maintenance shall not be made by children unless continuously supervised.

• Place the appliance on a flat, stable and dry surface and always keep the appliance in an upright position. Operating the appliance in any other position could cause a hazard.

• There may be trace of odour during the first few minutes of initial use. This is normal and will quickly disappear.

• Do not cover, obstruct or push objects into the vents and opening of the appliance as this may cause an electric shock, fire or damage the appliance.

• Never place anything on top of the appliance.

• Do not operate the appliance with wet hands.

• Do not operate the appliance without the filter.

• Do not use this appliance near water or in the immediate surroundings of a bath, shower or a swimming pool. Never locate the appliance where it may fall into a bathtub or other water container.

• Do not allow water or other liquids to run into the interior of the appliance, as this could create a fire and/or electrical hazard.

• This appliance is intended for indoor household use and similar applications. Do not use outdoors.

• Avoid placing the power cord in areas where it can become a tripping hazard. Do not place the power cord under carpeting or cover it with rugs, runners or similar.

• To avoid a circuit overload when using this appliance, do not operate another high-wattage appliance on the same electrical circuit.

• Always plug the appliance directly into a wall socket. Avoid using extension leads where possible as they may overheat and cause a risk of fire.

• Do not use this appliance with an external programmer, timer switch or any other device which would switch the appliance on automatically unless this has already been pre-built into the appliance by the manufacturer.

• Do not kink or wrap the power cord and plug around the appliance, as this may cause the insulation to weaken or split, particularly where it enters the appliance.

• Do not pull on the mains cable. Never move, carry or hang the appliance by the mains cable.

•  Ensure the mains cable is fully extended before use and arrange it so that it is not in contact with any part of the appliance.

• Do not operate the appliance with any safety guards removed.

• Do not operate the appliance if there are signs of damage to the appliance, power cord, or any of the accessories supplied. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.

• Do not attempt to repair or adjust any electrical or mechanical elements in the appliance. Doing so may be unsafe and will void your warranty.
  Ensure that the mains supply (including voltage, frequency and power) complies with the rating label of the appliance.

• Do not use the appliance near petrol, paints, flammable gases, ovens, or other heating sources.

SPECIFICATIONS

• Voltage: 220-240V~
• Frequency: 50-60Hz
• Power: 50W
• Size: 26 x 26.3 x 52.7cm
• Net Weight: 5.15Kg
• Gross Weight: 7.0Kg
•  Clean Air Delivery Rate (CADR): 518m3/h

PARTS

Top

1. Air outlet
2. Control panel

Front

3.  Air intake
4. Display
5. Main body

Back

6. Filter
7.  Power Cord
8.  Filter Cover
9. Ionizer
10. UV-C
    9,10 are inside and well-hidden in the device.

BEFORE YOU USE

Prior to first use, please ensure you follow the steps below:

• A. Open the filter cover
• B. Remove the filter from air purifier and remove its PE bag
• C. Insert the filter back into the air purifier
• D. Re-attach the filter cover thoroughly than traditional large granular activated carbon filters.
  

HOW IT WORKS

Your Pro Breeze Air Purifier removes up to 99.95% of dust, bacteria, and allergens from the air. A 5-way purification system includes 3-layers of filtration, built-in Ultraviolet (UV) LED sterilization technology, and a negative ion generator to help you to create an invigoratingly clean living or working space.

• 3-Layer Filtration:

  • Fine Preliminary Layer: for large airborne particles, and to help protect the lifespan of the HEPA filter.
  • True HEPA 12 Filter Layer: HEPA captures airborne particles as small as 0.3 microns such as dust, pollen, mould spores and airborne mites.
  • Micro Granular Activated Carbon Layer: Removes pet odours, smoke odours and harmful gases such as formaldehyde and benzene. With 98%Total Volatile Organic Compounds (TVOCs) and 99% Formaldehyde removable rate, the micro granular activated carbon is evenly distributed and will purify air 5-10 times more thoroughly than traditional large granular activated carbon filters.

• Deep Ultraviolet (UV) LED Sterilization Technology: Our UV LED sterilization technology adopts wavelengths of between 260 and 280nm of UV-C light. This technology can be used for killing 99.9% of odours causing bacteria, certain mould and other allergens by destroying DNA & RNA. This is non-toxic, non-residual, and odorless, and can effectively kill most bacteria in 1-40 seconds. Our UV light is installed inside the air purifier to reduce exposure and does not need replacing unlike more traditional UV lights.
  Deep UV LED vs. Traditional UV mercury lamp: UV LED is more than 1,000 times more effective than a traditional UV-C mercury lamp. Unlike the traditional mercury lamp, UV LED does not contain any toxic substances and is more environmentally friendly.

• Negative Ion Generator: Releases negative ions into the air to eliminate airborne bacteria and contaminants. The negative ions bind to and neutralize airborne pollutants for a cleaner environment. The ultra-powerful Pro Breeze negative ion generator generates more than 2 million negative ion outputs.

DISPLAY & INDICATORS

1. Child Lock
2.  Ionizer
3. UV LED
4. Change Filter Indicator
5.  Air Quality Light Indicator
6.  PM 2.5 Standard

PM2.5

1. PM 2.5 Standard – PM 2.5 is a scale for measuring the number of particles smaller than 2.5 microns in the air (a human hair measure 50-70 microns in diameter). This is converted into an air quality index whereby the lower the number, the better the air quality.
2. Air Quality Light Indicator – The Air Quality Index will be displayed on the screen. The appliance will also light up based on the following scale:
   • Green (Excellent Air Quality)
   • PM2.5 < 75 µg/m3
   • Yellow (Medium Air Quality)
   • 76 < PM2.5 < 150 µg/m3
   • Red (Bad Air Quality)
   • PM2.5 < 151 µg/m3

CONTROLS

• ON/OFF Button: Press ON/OFF button once to turn the device on or off.

• UV Button: UV mode will activate the invisible UVC light. For more information on how it works, please see the HOW IT WORKS section above or visit Probreeze.com

  • The device will automatically start with UV mode off.
  • Press the UV button to turn the mode on/off. The indicator light will illuminate on/off.

• Timer Button: Timer mode can be used to turn the device off automatically (after 1, 2, 4, or 8 hours).

  • When the device is on, press the timer button until the desired time appears on the screen.
  • The device will automatically turn off when the time is reached.

• Speed Button: There are four speed options: Sleep, Low, Mid and High. When Sleep Mode is selected, the device will continue to run, but all lights will turn off.

  •  The device will start in low speed mode –
  •  Press the SPEED button to manually change the speed. The indicator light will illuminate on your selected speed.
  • To select Sleep Mode – , press the SPEED button until Sleep Mode is illuminated. The device will continue to work in sleep mode. All lights will turn off apart from the sleep mode indicator light.
  • To turn off sleep mode, press the SPEED button again.

• AUTO Button: When under auto mode, the device will adjust the fan speed automatically, according to the air quality.

  • Press the AUTO button once to turn on auto mode.
  • To turn off the auto mode, press the speed button.

• ON/OFF + Speed Button = Child Lock Button

  • Press and hold the ON/OFF and SPEED buttons simultaneously for 5 seconds to activate or deactivate the child lock mode.
    When in child lock mode, all other buttons will be disabled.

• UV + Timer Button = Filter Reset Button

  • After 2,000 hours of use, the filter indicator light flashes and the device will beep as a reminder to replace the filter.
  • If the filter needs replacing, press and hold the UV and TIMER buttons simultaneously for 5 seconds after you have replaced the filter to reset the device.
    Note: For your safety, the device will automatically stop working and show “E1” on the display, if the filter cover is opened.

• Timer + ON/OFF Button = Negative Ion Generator Button

  • The device will start in with the negative ion generator on.
  • Press and hold the TIMER and ON/OFF buttons simultaneously for 5 seconds to turn the Negative Ion Generator on/off. The indicator light will illuminate on/off.

REPLACING THE FILTER INSTRUCTIONS

WARNING: ALWAYS TURN THE APPLIANCE OFF AND UNPLUG THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE HANDLING AND REPLACING THE FILTER.
We recommended cleaning the filter with a vacuum cleaner once a month and replacing the filter every 6 to 12 months, or after 2,000 hours of use. After 2,000 hours of use, the filter indicator light will flash and beep as a reminder to replace the filter. You may need to replace the filter earlier depending on the environment of the room.
Note: this filter is for Pro Breeze PB-P07 Air Purifier use only. For replacement filters visit www.probreeze.com

To replace the filter

1. Shut down the appliance and turn the power off. (Figure 1)
2.  Open the filter cover by lightly pulling the handle.
3. Remove the filter by pulling out the tab at the top of the filter. We recommend that you have a bag ready to prevent the pollutants on the filter falling back into the room (Figure 2).
4. Insert the new filter and re-attach the door cover.
5. Press and hold the “UV” and “timer” buttons simultaneously for 5 seconds after you have replaced the filter.

Replacement Filter Model Number: PB-P07

CLEANING & STORAGE

WARNING: ALWAYS TURN THE APPLIANCE OFF, UNPLUG THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.

• Clean the exterior surface of the appliance by wiping it with a soft, damp cloth. Dry the appliance with a soft, clean cloth.

• Clean the vents and openings of the appliance regularly with a vacuum cleaner, using the brush attachment to avoid any dust build-up.

• To extend the lifespan of the filter,
  a vacuum cleaner, using the brush attachment can be used to remove dust from the surface of the filter.

• Store the appliance in a safe, clean and dry place, out of reach of children when not in use.

RECYCLING & DISPOSAL

The packaging of your new product has a recycle mark on it. Please dispose of it as recycled paper. Waste electrical products should not be disposed of with general household waste. This is to prevent the possible harm to the environment and human well-being. Contact your local council or government for information regarding the collection schemes in your area.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>